Availability
They look like ignition boxes--but are they? Nope. They're ZEX nitrous management units. These compact, power-adding units house all of the components, solenoids, and activation electronics in one smart--and safe--nitrous package, while keeping your engine bay neat. ZEX management units ensure that you will always run the right ratio of nitrous and fuel for maximum power, regardless of the outside temperature. Again--they're smart and safe! Units are available for wet and dry nitrous oxide systems. Maybe you like everything neat and tidy, or maybe you don't want to be obvious--whatever the reason, control your nitrous smarter, safer, and faster with ZEX nitrous management units.
Not Yet Reviewed
$332.95
They look like ignition boxes--but are they? Nope. They're FAST nitrous management units. These compact, power-adding units house all of the components, solenoids, and activation electronics in one smart--and safe--nitrous package, while keeping your engine bay neat. FAST management units ensure that you will always run the right ratio of nitrous and fuel for maximum power, regardless of the outside temperature. Again--they're smart and safe! Units are available for wet and dry nitrous oxide systems. Maybe you like everything neat and tidy, or maybe you don't want to be obvious--whatever the reason, control your nitrous smarter, safer, and faster with FAST nitrous management units.
Not Yet Reviewed
$307.95
On Sale
Nitrous Outlet offers a full line of replacement solenoids—fuel, nitrous, and purge. They're available with options such as orifice and inlet/outlet size, flow limit, and amp draw; most models include a filter screen. These stainless steel body units are engineered and race-proven for optimum performance. Heavy-duty solenoids surround the internal coil with epoxy to resist moisture, while a rubber O-ring protects the unit from debris. Nitrous Outlet solenoids are used in both daily drivers and record-setting race cars, as the flow range covers from 150 to over 600 hp. Select the unit needed for your application.
Not Yet Reviewed
$162.99
—
$319.99
$138.54
—
$271.99
These Edelbrock progressive nitrous controllers allow you to control the amount of nitrous over a period of time by providing a pulse width modulation to the solenoid. These units allow the user to compensate for varying track conditions and include many key features: * 0-10 second delay timer * 10 to 100 percent duty cycle * Single or dual nitrous power ramps * LED display with touch switch programming * Non-volatile data memory * Separate nitrous and fuel solenoid outputs
( 5 )
$741.95
On Sale
Nitrous Outlet Rechargeable Battery Mounts enable you to keep your nitrous bottle at an optimal temperature while in the staging lanes—removing the strain from your main battery system. CNC-machined from 6061 billet aluminum and black anodized for protection, the units feature 12 in. long 12-gauge wiring pigtails and will accept a Milwaukee M18 battery pack. The terminal block is made from PA12 nylon, so it's fully insulated from the billet base. These battery mounts can be affixed to the roll bar (using roll bar mount P/N 00-67000, sold separately) or any flat surface.
Not Yet Reviewed
$72.99
$62.04
Nitrous Express hot water nitrous bottle baths are a fast, reliable, and convenient way to maintain consistent pressure in your 10, 12, or 15 lb. nitrous bottles. They're the best engineered and highest quality water-based bottle heaters available. These units feature a high-strength composite tank design with built-in features and benefits that would not be possible with welded metal tanks. The composite tank is stronger and more durable than a comparable metal tank; plus, the composite tank will never rust or oxidize. Composite tanks insulate better than metal tanks, so the water heats more quickly and the heater element does not have to turn on as often. Nitrous Express molded a separator shelf inside the tank which keeps the bottles from sliding into the heating element during transport. Carrying slots are flush molded into the side of the tank to minimize the space the tank occupies. On top of the bottle baths is a digital display, so you don't have to bend over to see the temperature setting. The digital control circuit is easy to set and automatically maintains water temperature within 1 degree of accuracy. The units have multiple drain bungs molded-in, as well as multiple mounting bungs—so you have the flexibility to mount the included brackets to the floor or back of the tank.
( 1 )
$637.04
On Sale
Nitrous Outlet is your go-to source for aftermarket performance parts, including this line of wet nitrous nozzles. Precision machined for max airflow, these heavy-duty aluminum or stainless steel nozzles are capable of supporting direct port systems that spray over 800 hp. The newly designed fittings will accept jets from any brand, providing industry-leading atomization. Most units are black anodized and laser etched. Nitrous Outlet wet nitrous nozzles are available in straight shot or 90 degree discharge styles, in standard or extended reach lengths. Select the thread and fittings size needed for your application, along with the desired flow rate. You can order nozzles individually or in multi-packs. When the race begins, you're always ready for the speed boost with Nitrous Outlet!
( 2 )
$79.99
—
$764.99
$67.99
—
$650.24
On Sale
Nitrous Outlet Hot Bath nitrous bottle warmers are used by hardcore racing enthusiasts to heat nitrous bottles by submerging them in water—and using the electronic control module to dial in an exact temperature. This is the most precise method of heating a bottle to a specific pressure rating. The bath units will heat almost any size bottle and are meant for racers who need to heat several bottles. These heaters do not operate inside the vehicle; they must be plugged into a standard 110 V outlet to operate. Hot Baths are made from heavy gauge TIG-welded aluminum and are powdercoated for long-lasting oxidization protection. The edges have a thick rubber coating to prevent scratches to bottles; and a thick aluminum handle divides the unit into two sections. Prepare your nitrous for optimum performance!
( 1 )
$848.99
$721.64
Nitrous Express Maximizer Solo progressive nitrous controllers are plug-n-play compact single-stage units engineered for precision and reliability. Their 5-point time-based nitrous ramp features an optional activation delay, allowing for fully customizable nitrous delivery. Built-in RPM and TPS cutoffs provide added control, enabling performance and safety when you need it most! The Maximizer Solo's active screen ensures precise operation with real-time data visualization, while its menu-driven setup makes configuration quick and intuitive. Compact modules (2 1/16 in. control module and 2.5 in. x 2.5 in. solenoid driver) allow for seamless installation in tight spaces. Simplified wiring replaces standard nitrous relays; just unplug your existing nitrous relay and plug in the solenoid driver module! Single-wire RPM and TPS inputs and a single plug-in communication cable between modules make installation a breeze. Built-in safeguards ensure consistent and reliable operation for any racing application. Key features: * Customizable 5-point nitrous flow ramp: Precisely adjust nitrous delivery with five time-based points * Throttle Position Sensor (TPS) trigger: Configurable up to 16 V with a minimum of 0.5 V, preventing activation during TPS voltage loss * Time-Based Progression: Includes a fully adjustable 5-point time-based nitrous ramp * RPM Window Activation (optional): Enables nitrous only within user-defined RPM ranges for greater control and safety * Active Screen display: Built-in display provides real-time RPM and nitrous flow data, making monitoring and adjusting settings easy * Ease of Install: Simply unplug your existing nitrous relay and plug in the solenoid driver module in Includes: --- 5-wire relay harness --- 1 Control module --- 1 Solenoid driver
Not Yet Reviewed
$499.99
Nitrous Express nitrous solenoid drivers provide an additional solenoid driver for your NX Maximizer 5 nitrous controller. If you're going to try to progress more than two stages of nitrous, these units will help you succeed.
Not Yet Reviewed
$164.36
On Sale
Nitrous Outlet offers a full line of direct-fit parts to service your nitrous solenoids. These include coils, canisters, O-rings, pistons, springs, towers, and more. Solenoids are the heart of your nitrous system, so proper maintenance is essential to achieve optimum performance. Whether you're servicing the fuel, orifice, or purge unit, install Nitrous Outlet solenoid replacement components to restore the winning boost in every race.
Not Yet Reviewed
$180.99
$2.54
—
$153.84
On Sale
Nitrous Outlet roll bar mounted bottle brackets are race-proven, quick-release units with a show quality finish. Machined from 6061 billet aluminum, they offer aesthetic appeal, yet are tough enough to handle the hardest launces and shifts, holding a 10/15 lb. nitrous bottle in place while you rail through gears down the track. The quick-release clamps allow you to disconnect your bottle quickly and easily from the bracket for refilling and changing bottles. Nitrous Outlet roll bar mounted bottle brackets are available in several roll bar sizes. Choose your preferred size.
Not Yet Reviewed
$589.99
$501.49
A nitrous controller that handles up to four stages of nitrous—while giving you unprecedented control of the entire process? Yes! Introducing Lingenfelter Performance Engineering nitrous control center kits. The heartbeat of these kits is the NCC-002 controller designed for ease of use at home via their software program, and at the track through the programmer. If the fuel supply is controlled by the ECM or another method, it's capable of taking care of four stages of nitrous with many available disabling and triggering input options. This unit can also save three pre-defined programs for nearly instant access in case of changing conditions. Lingenfelter nitrous control center kits let you program settings only pit bosses could do just a few years ago. For better control and user input, these kits are for you. Models are available with or without harness and sensors EFI apps. Product features: * Two independent progressive stages of nitrous and fuel * Independent control of both nitrous and fuel duty cycle for each stage * Can be installed into most EFI vehicles; especially designed for GM LS-powered * Positive and negative relay, analog voltage, and shift light programmable outputs * 5 V and ground output for Fuel Pressure and Nitrous Pressure sensors for improved signal accuracy * Inputs: arming, clutch, shift, nitrous bottle, fuel pressure, AFR, TPS, two analog, frequency, engine speed tach * Time-based, fuel pressure, and air/fuel ratio safety overrides * Gear position, rpm, and mph-based nitrous enable * Independent Stage 1 and Stage 2 fuel advance settings allow you to fine-tune the system so low-pressure fuel is delivered to the engine at the same time or before the high-pressure nitrous, reducing the chances of initial lean spikes when each stage of nitrous is activated * Multiple solenoid frequency settings independent for Stage 1 and 2 * PC programmable via USB interface and Windows 7, XP, or Vista * No PC required; controller can be programmed at the unit * Built-in display to view inputs, outputs, and settings * Data logging built-in; PC required to view data. All channels logged at 100 samples per second; 25-second logging time * Nitrous user settings stored in each data log for easy recall * Free software updates; PC and internet access required * The NCC-002 is rated at a total combined maximum solenoid current draw for all four outputs; 2x nitrous, 2x fuel is 60 amps * *For applications that need more than 30 amps per channel or 60 amps total, external relays should be used You can program it in the car, or plug it into your laptop—you have a variety of ways to manage the nitrous and fuel in your engine as you head down the track.
Not Yet Reviewed
$645.95
—
$897.70
FAST Mustang GT Blackout nitrous systems are the first plug-and-play kits custom designed for the 2011 and newer Ford Mustang GT. Specifically tailored for the 5.0L, these systems have been tuned to add 75 to 175 additional horsepower—while ensuring easy installation and engine safety at the same time. Their adjustable jetting is perfect for wild to mild horsepower gains, while working effectively on stock or modified engines. For your convenience, all major components of FAST Mustang GT Blackout nitrous systems are factory pre-assembled inside the nitrous management unit. Add some ponies to your muscle car with one of these kits from FAST!
Not Yet Reviewed
$656.95
Keep the noise down and the flow smooth with Bosch fuel pressure accumulators. These replacement units feature a robust design to withstand severe operating conditions—plus, they are engineered to OEM specs to provide a quality fit and function. Keep your fuel pressure at the right level for easier starts and less pump noise with Bosch accumulators.
Not Yet Reviewed
$213.99
Manufacturer Rebate
Dedenbear NOC1 nitrous oxide controllers operate up to four stages of nitrous oxide, along with providing outputs to retard the ignition at the same time. Each unit has an additional combination multi-speed rpm shift/4-stage timer output to shift the car by rpm or time, or to run any other device a racer desires. An output to run the Remote E.T. display is also standard. The main advantage of these units is that they provide all of the controls needed to successfully run a nitrous-equipped car, all in one box. The NOC1 controllers are also ideal for timing multiple stages of ignition retards or lean out solenoids. Additional features: * Four independent timers to control a nitrous system of up to four stages with adjustments to the thousandth of a second * PRO/FULL switch allows two different groups of settings, so two different classes or track setups can be run with the push of a single button * Lighted keypad and display for night racing * Easy instant programming; laptop PC not required
Not Yet Reviewed
$906.99
On Sale
Nitrous Outlet pump station pumps are efficient, quiet, and reliable. The pumps are made for heavy use and are designed to pump nitrous from a mother bottle. They operate on compressed air and are ideal for speed shops and racers with a lot of bottle to fill.
Not Yet Reviewed
$1,503.99
$1,278.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
