Availability
Nitrous Pro Flow manifold pressure relief valves provide the racer with the safest and best performing nitrous systems in the world. These reusable valves eliminate races lost at the line, since they immediately reset for small backfires. This keeps you on the track after a backfire, rather than having to replace a burst panel. Naturally aspirated engines can benefit as well, particularly when using O2 sensors, which often cause backfire upon engine shutdown. The panel features a 1.25 in. hole that allows for the venting of excessive pressure, whether it is from a nitrous backfire or a naturally aspirated hiccup. They're excellent insurance to protect expensive carbs, throttle bodies, and intake manifolds. Pro Flow pressure relief valves are fully CNC-machined, anodized, and O-ringed to seal to the manifold.
( 3 )
$112.50
Nitrous Express EFI nozzle adapters are designed to mount the nitrous nozzle to the intake manifold. They are manufactured from aluminum and are black anodized for protection against corrosion. Simply screw the EFI nozzle into the adapter and then mount them securely to the intake manifold. Complete the installation of your EFI nitrous nozzles with these Nitrous Express EFI nozzle adapters.
( 1 )
$24.56
Wilson Manifolds conical discharge dry nitrous nozzles are revolutionary in their design, facilitating better distribution from cylinder to cylinder. This is accomplished by promoting the expansion of nitrous in a conical pattern upon exiting the nozzles to completely fill the intact tract. Racers looking for ways to upgrade their nitrous systems for better performance on the track certainly can't go wrong with these small but key parts, available in both aluminum and stainless steel.
Not Yet Reviewed
$36.00
Nitrous Pro Flow High-Flow solenoids are designed with the professional racer in mind. They feature stainless bodies, high-lift plungers for maximum capacity, and PTFE seals for longevity. Nitrous Pro Flow also offers nitrous solenoids with an integrated purge port for ease of packaging, the most complete purge of the system, and consistency and reliability. Order the type, flow, and size preferred for your application.
( 1 )
$123.75
—
$218.75
Do you need to replace your burst panels? Nitrous Pro Flow burst panels are replacements for your NPF Nitrous or Burst Panel spacers. Made from high quality materials Nitrous Pro Flow burst panels will ensure proper fit and function..
Not Yet Reviewed
$97.50
Nitrous Pro Flow stainless steel nitrous jets are perfect for tuners and racers alike. They are available in a large variety of sizes, and their stainless steel construction means they will not erode like brass jets. Dial-in your nitrous system to suit your needs with Nitrous Pro Flow jets.
( 1 )
$6.00
Nitrous Pro Flow blow down tube fittings are designed to connect the blow down tube to the nitrous bottle valve. They are made from quality materials and install easily in seconds.
Not Yet Reviewed
$50.00
Nitrous Pro Flow purge kits are designed to be plumbed into the main feed line with no additional fittings required. Purge systems allow any vapor in the nitrous feed line to be expelled prior to nitrous system activation, helping to eliminate any lag caused during the time required for the liquid nitrous to reach the plate or nozzle. If you're looking for a high-quality purge kit, Nitrous Pro Flow purge kits are your answer.
Not Yet Reviewed
$165.60
Nitrous Pro Flow patent-pending solenoid mounting brackets mount the solenoids close to the nitrous plate for minimum pressure drop. They are made from laser-cut aluminum and are anodized for protection. These brackets also provide a lightweight, clean, and secure method of mounting your nitrous and fuel solenoids and can be used with all Nitrous Pro Flow plates and most other brands.
Not Yet Reviewed
$123.75
Nitrous Pro Flow direct port nitrous systems offer maximum horsepower capabilities from 50 to 250 hp. At the heart of these systems is the Nitrous Pro Flow conical discharge dry nozzle, which promotes the expansion of nitrous in a conical pattern upon exiting the nozzle. This helps to more completely fill the intake tract, leading to better distribution from cylinder to cylinder. They include high-flow nitrous solenoids, a nitrous purge solenoid, stainless steel hard lines, and an equalizer distribution block, which provide the best possible distribution of nitrous, while maximizing flow and preventing nitrous phase change. If you're looking for serious horsepower out of your nitrous system, Nitrous Pro Flow direct port nitrous systems are your solution.
Not Yet Reviewed
$546.00
—
$3,120.00
Nitrous Pro Flow bottles patent-pending valve and tube assembly flows 360 lb. per hour more than the competitor's high-flow system. They use a unique radiused inlet and large-diameter pickup tube. This tube prevents separation in the flow of the nitrous, which can cause a phase change, resulting in flow loss. Nitrous Pro Flow lightweight aluminum bottles are powdercoated black to ensure durability.
( 1 )
$358.80
—
$454.80
Nitrous Pro Flow burst panel spacers serve two distinct functions. They provide the benefits of an open carburetor spacer, and also incorporate Nitrous Pro Flow's patented replaceable burst panels that will vent pressure between 75-90 psi for backfire protection with direct port and plate-type nitrous systems. Using these spacers is the only way to meet the requirement by the IHRA and other sanctioning bodies for burst panel protection when using a direct port type nitrous system on a cast intake manifold. These lightweight spacers are precision-machined from billet aluminum with a military spec hard coat for durability and corrosion resistance. They can be used with existing nitrous plate systems and the burst panels are easily replaced within minutes so you can make the next round.
Not Yet Reviewed
$325.00
Take some of the guesswork out with Nitrous Pro Flow 2-stage solenoid mounting brackets. Light-weight, laser cut, patent-pending brackets offer a secure method of mounting your nitrous and fuel solenoids close to the nitrous plate for minimum pressure drop. All Nitrous Pro Flow kits and most other brands of nitrous plates and solenoids can be used with these brackets. Performance wins out over aesthetics every day, but having them both is like hitting the trifecta. Nitrous Pro-Flow 2-stage solenoid mounting brackets allow you to have your cake and eat it too.
Not Yet Reviewed
$123.75
Nitrous Pro Flow system completion kits include a nitrous bottle with a modified high-flow valve and pick-up tube assembly. These kits' unique radiused inlet and large diameter pick-up tube design prevent separation in the flow of the nitrous, which can cause a phase change and a resulting loss of flow. Independent testing has shown up to 20 hp gains, by simply switching to the Nitrous Pro Flow bottle. Also included in these kits are a nitrous pressure gauge, a high-efficiency nitrous filter/adapter fitting (eliminates one connection), 16 ft. of feed line, and heavy-duty, quick-release bottle mounting brackets.
Not Yet Reviewed
$594.00
—
$630.00
Nitrous Pro Flow blow down tubes are installed to vent nitrous oxide to the outside of the vehicle in the event of an over-pressurized bottle occurrence. Blow down tubes are required by all sanctioning bodies when a nitrous oxide bottle is mounted within the driver compartment.
Not Yet Reviewed
$66.00
Nitrous Pro Flow patent-pending V-Force nozzles are designed to provide the most gradual and natural introduction of nitrous and fuel into the intake tract with an oval pattern. They completely fill the port, as opposed to a disruptive fan or wedge pattern, which may cause excessive fuel wash. These 90 degree nozzles are CNC-machined from 303 stainless to exacting tolerances. No more sifting through nozzles to find a matching set that is machined properly--these nozzles are built to the same quality standards that you've come to expect from Nitrous Pro Flow. They are made with stainless entry fittings instead of zinc plated steel, so there is no corrosion factor to worry about. The 1/16 NPT thread will make the replacement of the former industry standard easy.
( 1 )
$86.40
Nitrous Pro Flow EFI wet nitrous systems are tunable 50 to 150 hp systems that incorporate a V-Force nozzle and a programmable TPS system. Their V-Force nozzle provides the best possible cylinder to cylinder distribution characteristics for maximum power and reliability. Their TPS system utilizes your vehicle's throttle position sensor to properly activate the nitrous system at wide-open throttle only. They include vehicle-specific sized lines, custom solenoid mounting brackets, a fuel take-off adapter, a high-flow filter, and a nitrous pressure gauge. So, if you're looking for a superior-quality nitrous system that's specifically designed for your ride, look no further than these Nitrous Pro Flow EFI wet nitrous systems.
Not Yet Reviewed
$1,155.00
Nitrous Pro Flow filter and line adapters are designed to provide minimal pressure drop. This creates maximum flow and prevents a phase change in the nitrous oxide as it passes through. They are a must for prevention of costly solenoid damage and lost races due to debris entering the solenoids, nozzles, and/or spray bars. Nitrous Pro Flows' filter and line adapters replace the bottle adapter fitting and in-line filter for a cleaner, more efficient package with fewer connections.
( 3 )
$85.00
Nitrous Express purge valve kits help you to rid your nitrous lines of vapors. Depending upon your system, these kits include a -4 AN or -6 AN manifold, a push button, and a vent tube. They are available in a variety of styles; choose the model best suited for your vehicle and nitrous setup.
( 11 )
$47.71
—
$190.81
NOS LS Hi-Ram intake dry nitrous systems include everything needed for optimum nitrous distribution throughout LS-based engines. Their dry single-stage plate system sandwiches between the bottom base and the top plate on Holley Hi-Ram intake manifolds. Nitrous is then evenly sprayed directly into each cylinder runner. The intake plate is made from 6061 T-6 billet aluminum, and available in a black or clear anodized finish with a laser-etched NOS logo. The included jetting is for up for 250 hp, but the entire system is capable of supporting 1000+ hp. Systems are available with a 10 lb. or15 lb. aluminum, or 12 lb. carbon fiber nitrous bottle.
Not Yet Reviewed
$1,999.95
—
$2,099.95
On Sale
NOS Pro Shot Fogger nitrous oxide systems offers six-second technology for all-out racing. They're designed for high performance race cars, and offer superior atomization and tuning—by injecting precisely measured amounts of fuel and nitrous into each individual intake port. Power levels are adjustable from 150 to 500 hp or more by changing the jets in each Fogger 2 nozzle; plus, the latest in high-tech solenoids provide an extreme degree of reliability. These kits include the famous Fogger 2 nozzles, Super Pro Shot nitrous and Cheater fuel solenoids, aircraft-quality stainless-braided hose, jets, fittings, tubing, switches, installation hardware, and a tap for threading the intake manifold for the nozzles. Models are available with or without nitrous bottle and mounting brackets. Racing fuel, racing ignition system with timing control, and internal engine modifications are required.
( 5 )
$1,699.95
$1,499.95
—
$1,528.95
Nitrous Express nitrous solenoid brackets provide handsome options for mounting. Whether on the intake, cylinder head, throttle body, or carb flange, NX offers strong, precision-cut steel and aluminum versions to secure your solenoids in the perfect location. Make your nitrous install quick and easy, while looking clean and attractive with Nitrous Express nitrous solenoid brackets.
( 18 )
$8.18
—
$42.03
Nitrous Express offers several nitrous plumbing kits highlighting their selection of precision nozzles. Available with Shark, Piranha, SSV, STD, or dry nozzles, these direct port NX kits contain all of the right components to get the performance flowing in your setup. The kits include stainless steel tubing, B-nuts, sleeves, distribution blocks or hex rails, fittings, lines, and jetting. They are available with or without solenoids. Plumb your setup with nitrous kits that offer more flow and more go from Nitrous Express.
( 1 )
$44.58
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$857.57
—
$1,634.76
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
