Availability
Improve the performance of your nitrous oxide system with one of these Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems. They feature a one gallon, high-strength composite fuel cell that can be mounted in most factory battery trays without modification. The systems are also available with a high-output, internally mounted fuel pump and an adjustable external regulator, making installation quick and simple. When used with gasoline, they can support up to 800 nitrous horsepower. When used with methanol, they will support up to 400 nitrous horsepower. When used with race gas or methanol, the need to retard timing is significantly reduced. Often, on V8 engines using nitrous boosts of 150 hp and above, zero timing retard is required. The Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems reduce the need to upgrade OEM fuel pumps and will completely eliminate pressure drop at the fuel rail in EFI vehicles. They also include an integrated fuel level gauge and all mounting hardware for a no-hassle installation.
( 7 )
$883.99
Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 6 )
$857.57
—
$1,040.21
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$836.99
—
$1,040.21
On Sale
Nitrous Outlet has a selection of nitrous oxide bottles made from powdercoated machined aluminum or lightweight spun carbon fiber that will add a show-quality appeal to your setup. They are available in capacities to suit many applications. Feed your vehicle power juice from Nitrous Outlet nitrous oxide bottles.
( 6 )
$1,055.99
$950.39
If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp
( 6 )
$750.64
—
$1,138.24
Nitrous Express Holley Hi-Ram plenum plate conversion kits bolt between the upper and lower intake manifold on Holley Hi-Ram manifolds for a quick and clean install. Nitrous and fuel are injected into each cylinder from the side of the runner, providing direct port-like distribution without having a flow-restricting nozzle or spray bar in the runner. High-tech Holley Hi-Ram plenum plate conversions are made from billet aluminum with passages machined directly into the plate, so there's no need to worry about spray bars breaking or spinning.
Not Yet Reviewed
$942.99
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$833.99
—
$1,183.99
$750.59
—
$1,065.59
The NXd Stacker nitrous systems are the pinnacle in economical, safe add-ons for your modified diesel truck. Nitrous Express is committed to advancing nitrous technology. With these systems, they have succeeded in boosting torque and horsepower, dramatically reducing exhaust temperatures, and eliminating that ugly black smoke cloud. They allow you to stack nitrous on your existing diesel chip. These Stacker systems include Lightning series solenoids, a nitrous bottle with a Lightning 45 bottle valve, stainless braided feed line, nickel plated fittings and all necessary hardware need for installation. For the most up-to-date technology, always look to Nitrous Express!
Not Yet Reviewed
$771.99
—
$887.12
NOS Pro Race Fogger Professional kits have logged many hours of research and development at the race track. They're available with soft plume fogger or annular fogger nozzles. The kits also feature new distribution blocks and solenoids. The distribution blocks are manufactured from billet aluminum and are bright dip anodized in red and blue. They also use 3/16 in. compression fittings that are compatible with hard line or poly line. NOS Pro Race Fogger Professional kits include a new Pro Race nitrous solenoid, featuring a proprietary plunger material that resists swelling, and yet seals as well as Viton®-type material. The nitrous solenoids have a blue powdercoated housing and the Cheater fuel solenoid has a red powdercoat for easy identification. Achieve up to an additional 800 hp with select NOS Pro Race Fogger Professional kits.
( 3 )
$949.95
—
$999.95
On Sale
Nitrous Outlet nitrous oxide hardline plate systems arrive out of the box ready to deliver superior atomization. These systems come with a hardline from the solenoids. Like the softline systems, they spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max-flow 400 hp billet aluminum plate * Wide-open throttle activation switch * Black powdercoated aluminum or steel bottle with bracket (included in some packages) * Hardware, hardlines, electric, and jetting included * E85-compatible with different jetting * Jetting included for 50-100-150-200 hp
Not Yet Reviewed
$842.99
—
$1,201.99
$758.69
—
$1,081.79
NOS Powershot nitrous oxide systems are an excellent way to increase the horsepower of your engine. They use a thin, 1/2 in. injector plate that fits between your intake and carburetor. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. They're easy to install and are factory-preset to provide 125 hp for V8 applications or 90 hp for V6s. Kits come complete with: * Nitrous and fuel solenoids * Fuel filters * 12 ft. of -4 AN stainless braided supply line * Switches * Wiring * All necessary hardware
( 16 )
$799.95
NOS Holley Hi-Ram LS nitrous plates provide a clean and easy way to install a nitrous system in your Hi-Ram intake manifold. These billet aluminum plates sandwich between the upper and lower intake, making installation simple. To keep things durable NOS machines each plate from one piece of 6061-T6 aluminum—then machines the passages directly into the plate and finishes them with an anodized coating to prevent corrosion. Designed to be run as a dry nitrous system, the plates are capable of supporting over 1,000 hp. Give your Holley Hi-Ram intake an extra kick with a NOS Hi-Ram LS nitrous plate. Order the model and finish recommended for your engine family application.
Not Yet Reviewed
$799.95
On Sale
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$860.99
—
$948.99
$774.89
—
$854.09
For years, nitrous systems have been just a plate bolted under the carburetor, equipped with two crude brass spray bars to inject nitrous and fuel into the intake charge. Nitrous technology is getting ready to take a huge leap forward! The ZEX Perimeter Plate nitrous systems are complete kits that provide optimum spray efficiency with nitrous and fuel outlets placed at 12 injection points around the perimeter of the intake manifold opening. This technology provides optimum distribution of nitrous oxide and fuel and delivers the most horsepower possible from your nitrous kit. Through ingenious cooling technology called Cryo-Sync, super-chilled nitrous is injected through the ZEX plate before being injected into the engine. This technology rapidly cools the carburetor and intake manifold while you spray, for even greater power. The ZEX Perimeter Plate nitrous systems are tunable from 100 to 300 hp and are compatible with any Dominator or square flange, 4-barrel carburetor application.
( 8 )
$761.95
—
$1,038.95
NOS Sniper EFI wet nitrous kits are the perfect upgrades for budget-minded builders who want the easy bolt-on power that made nitrous famous. Sniper EFI kits feature the exclusive NOS soft-plume fogger nozzle that finely atomizes the fuel for superior nitrous and fuel distribution. Sniper kits include all necessary installation components and will provide up to 75 hp in 4- and 6-cylinder engines—and up to 150 hp in 8-cylinder engines. Order the universal or recommended kit to best fit your vehicle and engine application.
( 5 )
$777.95
—
$849.95
If there isn't a specific NOS kit available for your ride, then you'll want to check out NOS PowerFogger EFI nitrous oxide systems. These wet-type setups can give you a hefty power boost--from 35 to 250 hp, depending upon the engine. They rely on NOS soft plume stainless steel fogger nozzles and come complete with everything you need. Premium unleaded or racing fuel is required. Do not use aftermarket chips or devices that advance timing, which can lead to detonation. Systems include: * Soft plume nozzle * Stainless braided hoses * Fittings * Jets * Relays * Solenoids * Wiring * Switches * Mounting hardware
( 3 )
$849.95
—
$899.95
Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware
( 2 )
$776.57
—
$1,136.87
Nitrous Express Mopar plate nitrous systems feature Phase 3 Spraybarless technology for the ultimate in atomization and distribution. Their plate bolts right between the throttle body and the intake, making installation a breeze. They include Lightning series nitrous and fuel solenoids, as well as a wide-open throttle switch so that the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the gas. These systems also include jetting from 35 to 150 hp and can be upgraded to 250 hp with additional jets. A 10 lb. bottle, braided stainless lines, stainless bottle brackets, and an arming switch, as well as every nut, bolt, and electrical connector needed also come with the kits to give you everything you need for a complete installation.
( 2 )
$781.77
—
$1,101.47
Available in a variety of sizes and valve flow styles, these bottles from Nitrous Express make it easy to design your system. Constructed from aluminum, they are available in white powdercoated or polished finishes.
( 6 )
$873.99
On Sale
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$1,012.99
$911.69
On Sale
Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.
( 1 )
$927.99
—
$1,194.99
$835.19
—
$1,075.49
Nitrous Express offers Next Generation complete nitrous pump stations with scale. This style pump will fill bottles faster (even with lower air pressure) than any other pumping station on the market. Includes: * NX Next Generation nitrous transfer pump with run-dry technology * Nitrous
Not Yet Reviewed
$1,030.72
NOS Super Powershot nitrous oxide systems are an excellent way to increase the horsepower of your engine. They use a thin, 1/2 in. injector plate that fits between your intake and carburetor. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. These systems are easy to install and allow you to adjust the power increase from 100 to 125 or 150 hp, simply by changing the fuel and nitrous jets. They come complete with an unfilled nitrous bottle, mounting brackets, nitrous and fuel solenoids, fuel filter, -4 AN stainless braided fuel line, fittings, replaceable jets, all necessary mounting hardware, and instructions.
( 1 )
$1,049.95
On Sale
Using old technology and applying their own R&D knowledge from the Stinger plates, Nitrous Outlet developed a single billet bar-style nitrous plate that achieves a superior spray pattern and distribution. They created a 2-piece design to get the discharge angles needed for the most even pattern possible and the most even distribution to go along with it. Nitrous Outlet 4150 Weekend Warrior tunnel ram dual plate nitrous systems are intended to work with dual-plane intakes, but are equally at home on 4150 flange single plane intakes, and are compatible with carburetion or EFI. Bottles are offered in several sizes and Weekend Warrior kits are available with or without a nitrous bottle. Choose your preferred bottle option. Features: * 6061 billet aluminum construction * Nitrous plate is .75 in. thick * Black anodized with laser etched logos and Fuel/N2O entry marking * Bar has 10 nitrous discharge holes and 10 fuel discharge holes per side * .122 in. nitrous and .177 in. fuel solenoids * Universal solenoid brackets and braided stainless hose * Includes premium gaskets and hardware * Nitrous jetting for 100 to 400 hp * Fuel jetting for gasoline and E85 for 5 to 55 psi * Provides a maximum flow of 350 hp * 10, 12, 15 lb. bottles are available
Not Yet Reviewed
$1,150.99
$1,035.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
