Availability
Showing In Stock Items. Show All 73 Items.
Nitrous Express throttle position activation switches are more durable and contain short circuit protection not found in other similar products. Constructed to work with most EFI vehicles, these switches are designed to trigger a relay at 1/2 amp max current draw, at or near wide open throttle.
( 7 )
$52.87
Any IHRA or NHRA-sanctioned track will require these Nitrous Express blow-off caps in all classes when you run with nitrous oxide. These are safety devices that fit on the bottle. If your nitrous system creates too much pressure, one of these caps will allow it to bleed off through the vent tube, which exits outside of the vehicle.
( 7 )
$35.78
These Nitrous Express nozzles are designed for use with your dry nitrous system. These nozzles are made from high-quality black anodized aluminum and have a 90 degree discharge.
( 4 )
$35.48
Nitrous Express offers a full range of switches and electronics for your nitrous system. These wide-open throttle switches are designed to be mounted underneath your gas pedal that releases the nitrous when you go to wide-open throttle.
( 13 )
$24.73
—
$44.94
NOS 90 degree nozzles are single-stage dry nozzles with radial design outlets and large 0.150 in. orifices. They maximize nitrous flow and distribution into the inlet air stream. NOS offers these nozzles in 303 stainless steel that ensures maximum stability and strength, or in anodized 2024 aluminum for strength and durability. Both deliver good looks and corrosion protection.
Not Yet Reviewed
$31.18
—
$37.43
NOS fan spray nozzles are designed to be used as independent nozzles for both nitrous and fuel, where installation restrictions might make Fogger nozzles impractical. Fan spray nozzles are fully adjustable with a simple jet change, and feature injection at a 90 degree angle. These aluminum nozzles are available in a variety of anodized colors.
( 5 )
$29.49
—
$31.18
Allstar chassis brackets or base mounts will accept your round tank brackets for securing nitrous bottles or fire bottles. These 2-piece brackets clamp to chassis tubing, creating a secure source for tank brackets. They're manufactured from billet aluminum with either a polished or black finish, and are available in several tubing diameter sizes to complete your mounting needs. Order the Allstar Performance nitrous oxide bottle roll bar mount brackets designed for fitment on your vehicle application.
( 2 )
$34.99
—
$36.99
Nitrous Outlet pressure relief valves are a quick way for drivers to arm their nitrous system by themselves. These safety blow-off valves meet the requirements of the NHRA and are required to pass tech inspection to shut off your nitrous supply. They're easily installed into an accessory port of a nitrous bottle valve and include a rupture disc that opens the valve, relieving bottle pressure and ensuring that the racer is safe. A blow-down tube can be added to the valve using the external threads on the exposed end.
Not Yet Reviewed
$21.99
—
$37.99
Nitrous Outlet's cordless digital scale is your ultimate tool for precise weight measurement during nitrous bottle fills. Featuring an LCD display with blue backlight, it offers readings in pounds, ounces, and kilograms, with a maximum capacity of 440 lbs. Conveniently powered by 2 AAA batteries (included), each scale includes automatic power-off functionality and an easy-to-use On/Off button. The digital scale is compact and lightweight, designed for effortless portability, ensuring accurate measurements anywhere you need them. Ideal for enthusiasts and professionals alike, the scale is the perfect companion for your nitrous setup.
Not Yet Reviewed
$36.99
Philadelphia Racing Products micro switch mounting brackets are crafted from lightweight billet aluminum. Providing a precision fit to your carburetor for precise activation of the micro switch, the brackets work with both standard and throttle adjustment-screw secondary arms. PRP offers the unique brackets individually or with a micro switch. They come complete with stainless steel mounting hardware for the micro switch, as well as for mounting the bracket.
( 2 )
$31.79
—
$32.79
Nitrous Express nitrous solenoid brackets provide handsome options for mounting. Whether on the intake, cylinder head, throttle body, or carb flange, NX offers strong, precision-cut steel and aluminum versions to secure your solenoids in the perfect location. Make your nitrous install quick and easy, while looking clean and attractive with Nitrous Express nitrous solenoid brackets.
( 18 )
$42.03
—
$55.12
NOS bottle nut adapters enable you to connect your nitrous bottle to AN braided line for easy nitrous oxide plumbing. The fittings are available in a variety of materials, finishes, sizes, and configurations. Order the adapters needed for your application.
( 9 )
$20.99
—
$53.25
Nitrous Outlet is your go-to source for aftermarket performance parts, including this line of dry nitrous nozzles. Depending on your selection, these precision machined aluminum nozzles can flow up to 500 hp. The black anodized accessories are available in straight shot or 90 degree discharge styles, as well as multiple thread sizes. Nitrous Outlet dry nozzles can be found on both extreme racing vehicles and daily drivers alike. You can order them individually or in convenient multi-packs; then get ready for a proven power surge with quality nitrous spray performance.
Not Yet Reviewed
$21.99
—
$27.99
Nitrous Express designed these blow down tube kits to vent nitrous oxide out of your vehicle in case of safety disk ruptures. They install easily, directly to the nitrous oxide bottle.
( 8 )
$30.48
On Sale
NOS bottle blankets are an excellent accessory to help stabilize nitrous temperature by keeping heat in the bottle when it's cold, and out of the bottle when it's too hot outside. They're made from a nylon outer shell with insulation inside. They're also an excellent dress-up accessory, and are perfect for covering up scratched bottles.
( 5 )
$73.85
$40.62
Nitrous Outlet standard nitrous bottle brackets are designed to allow for the quick and easy removal of the nitrous bottle using wing nuts that can be adjusted without the use of tools. They are staggered in height to hold the bottle at an optimum angle to allow the most nitrous to be squeezed out of the bottle. The brackets are capable of holding both 10 lb. and 15 lb. bottles. Nitrous Outlet standard nitrous bottle brackets are made from heavy-duty stainless steel with a show-quality finish.
Not Yet Reviewed
$36.99
Nitrous Express nitrous jet packs are precision-made and guaranteed to be within .0005 in. of the specified jet size. NX brass jets can outflow the competition by 35 percent. How? They are crafted on CNC equipment with contoured inlets and multi-stepped outlets, which results in an unrestricted, turbulent-free flow of go-juice. Feed your system for powerful performance with Nitrous Express nitrous jet packs.
( 6 )
$46.40
NOS nozzle mounting kits are designed for mounting a nitrous nozzle in any position you need to.
( 1 )
$21.01
Nitrous Outlet distribution blocks are designed for splitting off hoses for multiple configurations. CNC-machined from billet aluminum, the nitrous accessories deliver precise flow and a clean look for your setup. The blocks are available in a variety of styles, sizes, and inlet/outlet quantities. Choose the models needed to build your custom nitrous system for optimum boost.
( 3 )
$24.99
—
$55.99
NOS bottle valve blow-down tubes safely route nitrous discharged from your blow-off cap to the outside. These aluminum tubes mount along the side of your nitrous bottle, so they don't get in the way. They're available in multiple styles and finishes.
( 4 )
$39.22
Nitrous Express bottle nut adapters allow you to connect your nitrous bottle to AN braided line for easy plumbing of your nitrous line.
( 1 )
$25.93
Nitrous Outlet solenoid mounting brackets can attach to any side of the intake to clear almost anything. They're specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. The brackets are built strong enough to withstand engine vibration, keeping your solenoids securely in place—while giving your system a custom, water-cut anodized aluminum show-quality finish.
( 2 )
$55.99
These high-quality, stainless steel ZEX nitrous bottle brackets fit all 10 lb. and 15 lb. nitrous bottles. They offer a perfect fit with a show-quality finish. The kits include rubber bracket covers with a no-slip design that will not damage the bottles' finish. ZEX nitrous bottle bracket kits are track-tested for proven durability and safety.
( 7 )
$44.95
If you're big into performance, we can't stress enough the major importance of jetting your nitrous system. Many racers casually assume that a jet is a jet--that all are created equally. However, Nitrous Outlet suggests that precision manufacturing and the jet design can make a huge difference in performance. These flare jet packs are the most common type. They're offered in many configurations to accommodate virtually every nitrous system; plus, each jet is stamped with the orifice size for easy identification and selection. To meet your power and tuning needs, use Nitrous Outlet jets!
( 2 )
$23.99
—
$49.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
