Availability
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components, and other intake-related accessories.
Showing In Stock Items. Show All 495 Items.
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$227.95
—
$652.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$374.95
—
$865.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$379.99
$109.99
—
$339.99
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$216.95
—
$919.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 49 )
$340.99
$180.99
—
$669.99
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
—
$1,496.95
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
—
$1,062.95
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
Not Yet Reviewed
$147.99
—
$1,717.22
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 28 )
$748.00
Add some muscle! Offenhauser C Series intake manifolds fill the gap between stock and competition setups for 4 and 6-cylinder cars and pickups. They improve torque in the mid and upper ranges, with power bands that span from 2,500 rpm to more than 7,000 rpm. Smaller applications use Holley 5200 or Weber 32/36 Series 2-barrel carbs. Holley 2300s can be used for competition with an adapter. Six-cylinder, 4-barrel versions can use square bore Holley or Carter carbs. Emission-control provisions can be blocked off for competition.
( 23 )
$599.99
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$296.95
—
$1,070.95
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,349.95
—
$1,649.95
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 15 )
$74.99
—
$169.99
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
BluePrint Engines dual plane intake manifolds are perfect to top any 302 based engine. Capable of supporting over 400 hp, these cast aluminum replacements are a perfect match for BluePrint HP9008 and HP9009 headed engines, or Windsor iron headed engines. The manifolds are a great addition to performance heads. Bolts and gaskets are included. Additional details (P/N: MLL-BPP302INT): * Engine block style: SBF 302, Stock/OEM standard deck * Cylinder head style: Windsor * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 5.813 in. * Intake finish: Natural * Note: This intake manifold features Windsor intake bolt pattern. This is the production intake manifold used on BluePrint SBF engines 302-347 c.i.d. May not be compatible with OEM chokes or OEM accessory mounting brackets. Does NOT fit 351W based engines, Cleveland, or GT40 applications.
( 5 )
$215.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,149.95
—
$1,299.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$1,149.95
$649.95
—
$1,249.95
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 9 )
$499.99
These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.
( 5 )
$1,222.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
