Availability
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components, and other intake-related accessories.
Edelbrock Performer RPM Marine intake manifolds are designed specifically for demanding marine applications. They feature a low-rise, dual-plane design with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and feature brass lined front water crossovers and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.
( 3 )
$605.95
—
$611.95
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
—
$617.95
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$540.95
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$472.95
—
$779.95
Offenhauser Turbo Thrust intake manifolds are tall, 2-piece, Tunnel Ram style intakes that make big power. They're available for popular U.S. V8s, both big blocks and small blocks. You can select the desired performance level by choosing among the different top sections, which are available for single and dual quads, including the Holley 4500. There also are top sections for boat-racing applications, where more torque is needed at lower revs, such as for jet drives. Power increases range from 1,800 rpm to 6,800 rpm with one quad, and 8,500 rpm with dual quads. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$327.99
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$1,332.95
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
—
$999.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
—
$1,249.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 27 )
$649.95
—
$699.95
These 360 degree Weiand X-CELerator single plane manifolds make their power in the 1,500 to 6,800 rpm range, which makes them the ultimate manifolds for high-performance street, drag, marine, and Oval Track engines. The carburetor mounting pad is designed to accept all current aftermarket performance carburetors, and includes an open-style plenum for increased flow. Best suited to engines equipped with aggressive camshafts, headers, and high-output ignitions, these intakes are sure to put a smile on your face.
( 11 )
$279.95
—
$525.95
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$949.95
—
$1,499.95
Weiand Team G intake manifolds are some of the most advanced single plane, 360 degree intakes on the market, combining excellent bottom-end performance with an exceptionally broad power curve that extends as high as 8,200 rpm. Ideally suited to Circle Track, drag racing, or high performance marine use, they feature a square-bore carburetor pad to accommodate 600-850 cfm aftermarket carburetors (spread-bores will not fit). Team G manifolds are designed for competition use, and they will not accept any stock accessory brackets. Also, hood clearance should be checked. Built using the original tooling, they may have minor appearance imperfections that do not affect their functionality. Such minor blemishes are normal with the sand casting process. Don't search for a vintage intake at swap meets or on the internet; buy the real deal new from Weiand! Features include: * Single plane/high-rise design with isolated plenum * Square carburetor mounting flange * Isolated water cross-over * Available with raised plenums * Offered for a variety of small block Chevrolet and big block Chrysler applications
( 21 )
$399.95
—
$449.95
Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor
Not Yet Reviewed
$949.95
—
$999.95
Holley Ford Hi-Ram carbureted intake manifold bases have a runner length and tapered cross section designed to perform well for a wide range of engine configurations. Holley's engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Holley Hi-Ram specs: * Cast aluminum construction * Available in natural or black finish * Plenum top gasket type—3/32 in. round O-ring cord
( 2 )
$728.95
—
$799.95
Edelbrock exhaust crossover plugs are designed mainly for use in marine or off-road applications. They are made of cast iron and install into the exhaust crossover without any modifications.
( 15 )
$23.95
The same even cylinder-filling Offenhauser 360 Degree Equa-Flow technology that does so much for V8s is also available for V6s. Offy's Single Quad V6 High-Rise intake manifolds share the unique split plenum of the bigger manifolds, along with carefully shaped intake runners. They deliver power without flat spots that stretches from as low as 900 rpm up to as much as 7,900 rpm, depending on the application. For marine use, these manifolds can be machined to as much as a 12 degree angle.
Not Yet Reviewed
$420.99
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$61.99
—
$82.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$37.99
—
$122.99
Standard Motor Products T-Series EGR valves help you get maximum fuel efficiency and power from your engine. Standard T-Series is a competitively priced line containing some of the most popular part numbers for whenever an installer grade product is called for. Properly operating EGR valves are essential to help your vehicle run flawlessly. Replace your vehicle's worn or malfunctioning EGR valves with these reliable replacements from Standard Motor Products. Standard T-Series EGR valves rotate 360 degrees to accommodate multi-fit applications with the required washers.
( 2 )
$51.99
Standard Motor Products EGR valve control solenoids are just what you need to replace your worn-out factory units. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 5 )
$26.99
—
$35.99
Motorcraft replacement exhaust gas recirculation EGR valves are produced and evaluated to exceptional standards to ensure enduring quality, maximum performance, and an exact, vehicle-specific fit. As an automotive aftermarket division under Ford Motors, Motorcraft manufactures genuine and OE-quality replacement parts for Ford, Lincoln, and Mercury vehicles.
( 1 )
$73.99
—
$229.99
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$24.99
—
$40.99
Keep your exhaust emissions--and your budget--down with Standard Motor EGR tubes. If your exhaust gas recirculation tube is cracked or leaking, your EGR valve will not function properly--and that's a problem. So, keep your exhaust gases recirculating properly and efficiently with quality-built Standard Motor EGR tubes.
( 2 )
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
