Intake Manifolds, EGR & Manifold Parts

On Sale

Holley LS Modular Lo-Ram EFI Intake Systems

Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors

5.0 out of 5 stars ( 1 )

$1,075.95

—

$1,126.95

$967.95

—

$1,013.95

Peterson Fluid Systems Manifold End Rail Spacers

Peterson manifold end rail spacers fill the gap between the manifold and lifter valley end rail when using raised port cylinder heads. These end rail spacers are available in various thickness. Installation hardware is included.

5.0 out of 5 stars ( 1 )

$42.99

—

$48.99

Holley LS Modular Hi-Ram Carbureted Intake Systems

Put your LS on the high road to performance with Holley LS modular Hi-Ram carbureted intake systems. Aggressive, bold, race-bred styling with the potential for outstanding performance makes these intakes perfect for creating your custom induction system. They are cost-effective and constructed from cast aluminum with runner lengths and tapered cross-sections designed to perform well with a wide range of engine configurations. If you don't have hood restrictions, the coolest look with the hottest power possibilities is available with Holley LS modular Hi-Ram carbureted intake systems--and they won't burn your budget, either!

Not Yet Reviewed

$1,024.95

On Sale

Holley LS Modular Hi-Ram EFI Intake Systems

Get your LS on the high road to performance with Holley modular Hi-Ram EFI intake systems. Aggressive, bold, race-bred styling makes these Hi-Ram intake systems perfect for creating your custom induction system. These cost-effective Holley systems are constructed from cast aluminum with runner lengths and tapered cross-sections designed to perform well with a wide range of engine configurations. If you don't have hood restrictions, the coolest look with the hottest power possibilities is available with Holley LS modular Hi-Ram EFI intake systems--and they hurt your budget either!

Not Yet Reviewed

$1,024.95

LS Classic Series '62 Fuelie Intake Manifold Systems

LS Classic Series '62 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic Corvette "flat top" mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '62 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.

Not Yet Reviewed

$5,153.95

Billet Specialties LS Valley Covers

Billet Specialties LS valley covers are engineered to fit LS2, LS3, LS7, and LSX blocks when using a carbureted intake manifold. They feature a ribbed design and are precision-machined from 6061 T6 aluminum and polished to a mirror finish to match other ribbed accessories. The covers include high-quality ARP 12-point hardware for the perfect finishing detail. The valley covers feature a provision machined into the back for the factory breather box and two 1/8 in. NPT ports for use with external breathers, oil separators, or catch cans. Designed for use with an OEM factory gasket (not included).

Not Yet Reviewed

$119.94

Summit Racing™ Premium EFI Intake Manifolds

Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.

4.45 out of 5 stars ( 77 )

$109.99

—

$339.99

Edelbrock Performer EPS Intake Manifold and Carburetor Kits

Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.

4.82 out of 5 stars ( 60 )

$754.95

Edelbrock Performer Intake Manifold and Carburetor Kits

Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.

4.68 out of 5 stars ( 34 )

$920.95

—

$991.95

On Sale

Holley EFI LS Hi-Ram Intake Manifolds

Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.

3.79 out of 5 stars ( 39 )

$1,177.95

—

$1,349.95

$1,059.95

—

$1,213.95

Edelbrock Performer RPM LS1 Intake Manifold Kits

Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.

4.1 out of 5 stars ( 10 )

$1,027.95

AFR Eliminator Series Intake Manifolds

AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.

4.31 out of 5 stars ( 26 )

$351.00

—

$571.00

Summit Racing™ Stage 1 Intake Manifolds

Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.

4.59 out of 5 stars ( 231 )

$199.50

—

$256.99

FiTech Ultimate LS Loaded Intake Manifold Kits

FiTech Ultimate LS Loaded intake manifold kits are just like the systems, but without the ECU and hand-held controller. FiTech Ultimate LS Loaded intake manifold kits will have: * Low-profile 92mm or 102mm (750 hp kits only) inlet aluminum fabricated intake with 1,500 to 6,500 rpm powerband, 3mm construction, TIG-welded, black anodized with embossed FiTech logo * CNC-machined with O-ring gaskets and hardware included * High-flow cable operated 92mm or 102mm (750 hp kits only) throttle body * Parabolic inlet machining for smooth throttle transitions, same as OE * Throttle body features progressive linkage pulley with double-return spring and adjustable stop * Billet fuel rails with AN fittings and fuel crossover * 36 or 55 (750 hp kits only) lbs./hr. flow-matched injectors

3.67 out of 5 stars ( 6 )

$965.00

Summit Racing™ Stage 3 Intake Manifolds

Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.

4.41 out of 5 stars ( 70 )

$276.99

—

$279.99

Edelbrock Victor II EFI Chrysler HEMI Intake Manifolds

Edelbrock Victor II EFI Chrysler HEMI intake manifolds are designed for the later model Eagle or WT versions of Chrysler 5.7L, 6.1L, and 6.4L Gen III HEMI passenger car engines (with stock fuel injectors). They are similar in design to the early factory 6.1L SRT models but incorporate a wider plenum with long tapered runners, increasing airflow to the head, and relocated injector bosses to decrease port restriction. The front inlet accepts stock 80mm or Hellcat 92mm OEM throttle bodies and features the 5.7L/6.1L throttle body location/orientation. Edelbrock Victor II EFI Chrysler HEMI intake manifolds will clear most hoods without modifications and provide increased horsepower over stock units. Additional information: * Nitrous bosses added along the near-vertical runners * OEM or OE-style replacement air intake system must be used on 5.7L/6.1L engines. The 6.4L engines require OEM or OE-style 6.1L intake systems (without intake runner control valve) as stock and aftermarket 6.4L air intake systems will not fit * EDL-3647 fuel rail and hose kit are required for installation (sold separately) * Calibration required after installation * Not intended for use on Dodge/Ram trucks

4.86 out of 5 stars ( 7 )

$1,168.95

On Sale

Summit Racing™ Intake Manifold, Carburetor, and Air Cleaner Pro Packs

These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.

4.57 out of 5 stars ( 127 )

$1,189.55

$775.85

—

$1,895.62

Trick Flow® Engine Steam Line Plumbing Kits for GM LS

Your modified LS-powered cars and trucks will be easier to service with an upgrade to a race car plumbing system. These plumbing kits contain black anodized billet aluminum fittings, O-rings, stainless steel bolts, and all of the necessary hose to plumb just the front of the heads or all four corners. Choose the most desirable upgrade to your factory steam tubes--Trick Flow® engine steam line plumbing kits for GM LS.

4.08 out of 5 stars ( 75 )

$101.99

—

$148.95

On Sale

Holley EFI Hi-Ram Intake Manifolds

Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings

4.5 out of 5 stars ( 2 )

$1,075.95

$875.95

—

$1,075.95

Edelbrock Performer RPM Dual Quad Air-Gap Manifold and Carburetor Kits

Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.

4.43 out of 5 stars ( 7 )

$1,865.95

—

$2,078.95

FAST LSXHR Intake Manifolds

The FAST LSXHR intake manifolds are available for LS3 rectangular port applications, as well as LS7 raised rectangular port applications. These units are the industry's first polymer tunnel ram-style intake manifolds—and are ideal for generating maximum power in boosted and naturally aspirated engines. Order the model designed for your application. Features include: * Standard "tall" stacks are interchangeable with separately purchased "medium" and "short" stacks to find the most powerful combination * Polymer construction is lightweight and high strength to eliminate power-robbing heat soak commonly found in aluminum intake manifolds * Average 30 hp gain between 5,000 and 7,500 rpm over competitors' high-ram intake manifolds * Rated for up to 45 psi of continuous pressure * Compound fuel injector angle aims spray pattern for ideal atomization, resulting in maximum power production and superior drivability * Reversible top allows for forward- or firewall-facing throttle body installations * Two nitrous nozzle bosses per runner for clean and easy direct port system installations * 103mm throttle body opening can be ported to 105mm

2.71 out of 5 stars ( 7 )

$1,245.95

—

$1,325.95

Edelbrock Performer RPM Air-Gap Intake Manifold and Carburetor Kits

Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.

5.0 out of 5 stars ( 2 )

$1,084.95

—

$1,141.95

Summit Racing™ Stage 2 Intake Manifolds

Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.

4.68 out of 5 stars ( 57 )

$251.99

—

$416.99

On Sale

Holley EFI LS Hi-Ram Intake Manifold Bases

Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.

5.0 out of 5 stars ( 1 )

$921.95

—

$1,024.95

$828.95

—

$921.95