Availability
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components, and other intake-related accessories.
Pack some more power into your Coyote-powered Mustang with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. These manifolds were original equipment on 2013 Mustang Cobra Jet factory race cars and are proven to give you power increases without sacrificing torque. They are constructed from lightweight composite material that is extremely durable, even under racing conditions, but is still compatible with production fuel rails. To beef up the power band, the engineers at Ford Performance Parts utilized the larger GT500/Cobra Jet throttle body and optimized the runners to make peak power at 7,750 rpm, making your car a beast at the track. Don't mess around with unproven parts when you can get track-proven results with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. Additional features include: * Significant power increase above the M-9424-M50BR Ford Performance Parts Boss 302 intake manifold with no loss of torque * Total intake volume 635 cubic inches * Designed and tested to 20+ psi * O-ring intake gaskets included * Requires throttle body M-9926-MSVT, M-9926-CJ65, or M-9926-SCJ * Requires Cobra Jet 5.0L Cold Air Kit M-9603-M50CJ to mate to oval throttle body * Mustang GT requires installation kit M-9444-M50B or equivalent (inlet hose in kit not used) * Not compatible with strut tower brace * CJ inlet tube does not have provisions for aspirator tube hook up common to automatic-equipped 2011-14 Mustang GT * Calibration is necessary to prevent engine damage! * Calibration not included!
Not Yet Reviewed
$1,381.99
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$949.95
$508.95
—
$853.95
Offenhauser Turbo Thrust intake manifolds are tall, 2-piece, Tunnel Ram style intakes that make big power. They're available for popular U.S. V8s, both big blocks and small blocks. You can select the desired performance level by choosing among the different top sections, which are available for single and dual quads, including the Holley 4500. There also are top sections for boat-racing applications, where more torque is needed at lower revs, such as for jet drives. Power increases range from 1,800 rpm to 6,800 rpm with one quad, and 8,500 rpm with dual quads. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$270.99
—
$673.99
Offenhauser 6-Carburetor Log intake manifolds can be used with just two or up to six 2-barrel carburetors, depending on the application. They have a balanced "Jet Air Flo" design, with rectangular "Ventura" intake passages. Designed for 3-bolt carbs only.
Not Yet Reviewed
$759.99
Summit Bucks
ACDelco GM Genuine Parts EGR valves are emission control devices and GM recommended replacements for your vehicle's original part. The EGR (Exhaust Gas Recirculation) valve modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. These GM Genuine Parts EGR valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 18 )
$22.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$81.99
—
$89.99
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$417.95
$376.16
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$476.95
$429.26
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$497.95
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$552.95
—
$645.95
On Sale
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 154 )
$449.95
$403.95
On Sale
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$605.95
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 45 )
$736.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
