Availability
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...
Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components, and other intake-related accessories.
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
Performance Design Carbon pTR intake manifold lids offer a replacement carbon fiber top for the Carbon pTR manifold, a custom project, or an upgrade. The plenum is constructed from high-strength carbon fiber with high-temperature epoxy for improved strength to weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the heads and houses all ports/sensors hidden in the valley. The combination of materials offers a 10 lb. weight savings over competitive aluminum tunnel ram manifolds. Select the pTR lid needed for your application. Specifications and features: * Carbon fiber plenum with five layers of carbon and foam core flange * Tested to over 50 psi of boost * Includes stainless steel hardware for installation * Anodized billet throttle flange available in red or black
Not Yet Reviewed
$899.99
—
$1,039.99
Representing the next generation in intake manifold design, the BladeRunner from aFe Power uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold, these paths are smoother and shorter, producing much smaller dead air zones for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! Constructed out of cast A356-T6 aluminum, the BladeRunner intake manifolds use a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. These intake manifolds are available in configurations to suit a wide variety of vehicles, including models that range in years from the 1990s and up. Additional features include: * Cast A356-T6 aluminum construction * Proprietary internal bolt design guaranteed not to deform or leak * Up to five port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware * Intake comes with necessary hardware and bolts to the factory location for a hassle-free installation
( 5 )
$622.65
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$84.99
Dorman emission fittings can be used throughout your emissions system. Made from quality material, These OE replacement tees provide the strength and service life that you expect. Replace your failing parts with Dorman fittings.
( 2 )
$13.99
Motorcraft replacement exhaust gas recirculation EGR valves are produced and evaluated to exceptional standards to ensure enduring quality, maximum performance, and an exact, vehicle-specific fit. As an automotive aftermarket division under Ford Motors, Motorcraft manufactures genuine and OE-quality replacement parts for Ford, Lincoln, and Mercury vehicles.
( 1 )
$105.99
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$33.99
Dorman heavy-duty EGR coolers are a direct replacement cooler that has been designed to match the fit and performance of the original. They are manufactured from stainless steel specifically for your diesel vehicle and quality-engineered to cool exhaust gas and recirculate it back to your engine. These coolers have been rigorously tested for heat transfer, burst testing, and vehicle try-on testing to ensure fit and reliability. The heavy-duty EGR coolers include all necessary O-rings, gaskets, and hardware for a complete repair job. Keep your big rig legal and performing its best with one of Dorman heavy-duty EGR coolers.
Not Yet Reviewed
$2,239.99
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$859.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
