Intake Manifolds, EGR & Manifold Parts

Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise...

Whether you’ve got a carbureted street engine, fuel-injected mod motor, or blown race mill, we’ve got the right intake manifold to feed the beast. From low-rise dual plane intakes to single plane manifolds and tunnel rams, we carry carbureted intake manifolds from the best brands—Edelbrock, Weiand, Offenhauser, Brodix, Dart, and more. We’ve also got top-brand fuel-injected intake manifolds for today’s most popular engines, including GM LT, GM LS, Ford mod motors, Ford Coyote, Dodge Magnum, and more. Shop Summit Racing for complete intake manifolds, manifold bases, upper plenums, EGR components,...

Showing In Stock Items. Show All 34 Items.

Individual Parts

Part Groups

Results 1 - 24 of 27

Chevrolet Performance L76/L92 Intake Manifolds

These Chevrolet Performance L76/L92 intake manifolds are designed for use with Chevrolet Performance L76/L92 cylinder heads. They are manufactured from aluminum, have a natural finish, and accept a standard 4-barrel square bore carburetor. The Chevrolet Performance L76/L92 intake manifolds include mounting hardware and feature 3/8 in. NPT vacuum bosses.

4.0 out of 5 stars ( 1 )

$669.59

Edelbrock Performer RPM Air-Gap Intake Manifolds

Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.

4.62 out of 5 stars ( 447 )

$374.95

—

$860.95

Edelbrock Performer Intake Manifolds

Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.

4.61 out of 5 stars ( 572 )

$216.95

—

$919.95

Offenhauser C Series Intake Manifolds

Add some muscle! Offenhauser C Series intake manifolds fill the gap between stock and competition setups for 4 and 6-cylinder cars and pickups. They improve torque in the mid and upper ranges, with power bands that span from 2,500 rpm to more than 7,000 rpm. Smaller applications use Holley 5200 or Weber 32/36 Series 2-barrel carbs. Holley 2300s can be used for competition with an adapter. Six-cylinder, 4-barrel versions can use square bore Holley or Carter carbs. Emission-control provisions can be blocked off for competition.

4.32 out of 5 stars ( 25 )

$599.99

Edelbrock Performer RPM Intake Manifolds

Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.

4.41 out of 5 stars ( 225 )

$296.95

—

$1,070.95

Edelbrock Victor Jr. Intake Manifolds

Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.

4.73 out of 5 stars ( 62 )

$425.95

—

$801.95

AFR Eliminator Series Intake Manifolds

AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.

4.31 out of 5 stars ( 26 )

$351.00

—

$571.00

On Sale

Weiand Street Warrior Intake Manifolds

Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.

4.59 out of 5 stars ( 140 )

$511.95

$245.95

—

$767.95

On Sale

Weiand Hi-Ram Tunnel Ram Intake Manifolds

For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.

3.68 out of 5 stars ( 31 )

$665.95

—

$716.95

Edelbrock Super Victor EFI Intake Manifolds

These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.

4.9 out of 5 stars ( 10 )

$573.95

—

$1,068.95

On Sale

Weiand Track Warrior Intake Manifolds

Revolutionize the way your engine performs with power-boosting Weiand Track Warrior intake manifolds! Designed for high performance engine applications, they are ideal for mean street machines as well as for competition super-class big block powerplants. They are computer engineered and dyno-proven to produce more horsepower and torque as a result of superior cylinder-to-cylinder distribution, giving the Track Warriors the edge over the competition and ensures safe, consistent air/fuel ratios for your engine. Plus, permanent mold castings provide weight savings of 10 to 20 percent over traditional sand cast pieces while maintaining inform wall thickness for porting. So, when you look for the pinnacle of performance, price and quality, just look to Weiand.

4.31 out of 5 stars ( 26 )

$562.95

$426.95

—

$562.95

On Sale

Holley SBF Hi-Ram EFI Intake Manifolds

Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)

4.2 out of 5 stars ( 5 )

$1,299.95

$1,168.95

Edelbrock Victor Jr. EFI Intake Manifolds

Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.

4.9 out of 5 stars ( 10 )

$512.95

—

$713.95

Edelbrock Victor Intake Manifolds

Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.

4.46 out of 5 stars ( 24 )

$427.95

—

$1,017.95

On Sale

Weiand Team G Intake Manifolds

Weiand Team G intake manifolds are some of the most advanced single plane, 360 degree intakes on the market, combining excellent bottom-end performance with an exceptionally broad power curve that extends as high as 8,200 rpm. Ideally suited to Circle Track, drag racing, or high performance marine use, they feature a square-bore carburetor pad to accommodate 600-850 cfm aftermarket carburetors (spread-bores will not fit). Team G manifolds are designed for competition use, and they will not accept any stock accessory brackets. Also, hood clearance should be checked. Built using the original tooling, they may have minor appearance imperfections that do not affect their functionality. Such minor blemishes are normal with the sand casting process. Don't search for a vintage intake at swap meets or on the internet; buy the real deal new from Weiand! Features include: * Single plane/high-rise design with isolated plenum * Square carburetor mounting flange * Isolated water cross-over * Available with raised plenums * Offered for a variety of small block Chevrolet and big block Chrysler applications

4.29 out of 5 stars ( 21 )

$409.95

$367.95

—

$460.95

Edelbrock Victor EFI Intake Manifolds

These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.

5.0 out of 5 stars ( 2 )

$509.95

—

$1,049.95

Trick Flow® R-Series 11R 227 Port-Matched Carbureted Intake Manifolds

Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Integral bosses allow adding nitrous nozzles. Accepts Holley 4150-style square bore carburetors.

Not Yet Reviewed

$674.99

Edelbrock Performer RPM Marine Intake Manifolds

Edelbrock Performer RPM Marine intake manifolds are designed specifically for demanding marine applications. They feature a low-rise, dual-plane design with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and feature brass lined front water crossovers and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.

5.0 out of 5 stars ( 3 )

$605.95

—

$611.95

Edelbrock Victor Jr. CNC Intake Manifolds

Edelbrock offers the perfect complement to your competition headers--the Victor Jr. CNC intake manifolds! These versatile manifolds are excellent for many applications, from high performance street to drag/Circle Track racing. The CNC-blended port exits match any competition head and also provide maximum performance for engines with standard port location and iron and aluminum cylinder heads.

3.5 out of 5 stars ( 4 )

$573.95

Trick Flow® R-Series 11R 205 Port-Matched Carbureted Intake Manifolds

Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carbureted intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Integral bosses allow adding nitrous nozzles. These manifolds accept Holley 4150-style square bore carburetors.

Not Yet Reviewed

$674.99

On Sale

Holley Keith Dorton Signature Series Intake Manifolds

In head-to-head dyno testing, Holley Keith Dorton Signature series intake manifolds outperformed the nearest competition by 25 HP at 7,100 rpm. Engineered by Holley and professional engine builder Keith Dorton, their single plane design yields superior power in the 4,500 rpm to 8,500 rpm range. They fit 23 degree, standard-port Chevy small block heads, have a square bore mounting flange, and are ideal for classes requiring cast iron heads and un-ported manifolds. They're designed for Oval Track and drag racing.

3.0 out of 5 stars ( 2 )

$578.95

$520.95

Wilson Manifolds ProFiler 23-Degree Intake Manifolds

Wilson Manifolds ProFiler 23-degree intake manifolds are the result of a collaboration between "the leader in induction design and technology"—Wilson Manifolds and ProFiler Performance. These SBC aluminum manifolds have shown a 25 hp gain over the competition in independent dyno testing, and feature a 4150 carburetor flange and fuel injection bosses cast on the manifold. Select one for your build.

Not Yet Reviewed

$762.00

Trick Flow® R-Series 11R 205 Port-Matched Fuel Injected Intake Manifolds

Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.

Not Yet Reviewed

$724.99

Trick Flow® R-Series 11R 227 Port-Matched Fuel Injected Intake Manifolds

Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.

Not Yet Reviewed

$724.99

Page 1 of 2
Next