Availability
Showing In Stock Items. Show All 24 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 54 )
$204.99
$199.99
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$371.99
On Sale
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
$314.96
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$208.95
—
$432.95
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$165.99
—
$178.99
Dorman intake manifold runner control valves are designed to stay closed at lower rpm to improve low-speed and cold-engine performance. At higher rpm, the valves completely open to improve high-speed engine performance. Get your engine performing at its best again with one of these Dorman intake manifold runner control valves.
( 12 )
$75.95
—
$91.95
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 37 )
$46.99
—
$114.99
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
These aFe EGR Coolers utilize larger-than-OEM diameter tubes with a thicker wall to reduce clogging, extend life, and resist failure. They are manufactured from stainless steel with all connections TIG-welded, not braised, and pressure-tested at the factory. They feature a direct-flow design providing seven large diameter flow-through tubes to resist clogging, resulting in the extended life of the cooler. The heat exchanger tube wall thickness is more than twice as thick as the OEM versions.
( 3 )
$484.05
Dorman EGR valves effectively recirculate exhaust gas to be re-burned in the intake manifold where the engine can burn it again. This reduces emissions and ensures that your vehicle is performing at its maximum potential. When your EGR valve isn't working properly, it can result in reduced performance or increased fuel consumption. Dorman parts are direct-fit replacements to ensure a proper fit.
( 10 )
$62.99
—
$146.95
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$19.99
—
$87.95
Standard Motor Products T-Series EGR valves help you get maximum fuel efficiency and power from your engine. Standard T-Series is a competitively priced line containing some of the most popular part numbers for whenever an installer grade product is called for. Properly operating EGR valves are essential to help your vehicle run flawlessly. Replace your vehicle's worn or malfunctioning EGR valves with these reliable replacements from Standard Motor Products. Standard T-Series EGR valves rotate 360 degrees to accommodate multi-fit applications with the required washers.
( 2 )
$37.99
—
$51.99
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$54.99
—
$196.99
BD Diesel EGR coolers are heavy-duty replacement coolers that are made of TIG-welded 304L stainless steel. They are designed to prevent coolant leaks into the cylinders that can create a hydrolock condition, which will damage the head gaskets and possibly the heads themselves, which has been known to happen with OEM units. They also feature water deflectors that help to increase turbulence to the coolant flow to aid in heat dissipation. BD Diesel EGR coolers require no performance tuner and will not activate your SED light.
Not Yet Reviewed
$459.95
Standard Motor EGR coolers are designed to meet or exceed OE specifications, contributing to proper operation of the vehicle's emission system. The coolers are constructed with high-grade steel that's resistant to premature rust, ensuring product longevity during extreme vehicle operation. These OE replacements are available for a variety of applications—for correct fit and easy installation.
( 1 )
$335.99
—
$1,686.99
Dorman EGR coolers are designed to prevent coolant leaks into your exhaust manifold and help protect your engine from extensive damage. They are manufactured from stainless steel specifically your diesel vehicle and quality-engineered to cool exhaust gas and recirculate it back to your engine. The tube design increases part longevity, helps to reduce soot collection and clogging, and prevents issues with radiator-style EGR coolers. All necessary O-rings, gaskets, and hardware are also included to help facilitate a complete repair job. Keep your big rig legal and performing its best with one of these EGR coolers by Dorman.
( 3 )
$270.67
—
$439.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
