Availability
Showing In Stock Items. Show All 30 Items.
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
—
$1,062.95
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$752.93
—
$909.93
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$1,049.95
Designed for 1988-96 Ford trucks (under 8,600 GVW) with fuel-injected 5.8L V8 engines, the modular design of these Edelbrock manifolds incorporates the latest airflow technology for maximum torque gains in the mid range. Other features include a broad power range from idle to 5,500 rpm and a removable plenum cover that allows access to runners. The base manifold is CNC port-matched to the upper manifold for maximum power, and they accept all stock hardware. The upper is powdercoated light titanium gray, and the base is as-cast.
( 11 )
$1,132.95
Prepare your pony for the street and strip! The Edelbrock Performer 5.0 RPM II manifolds are designed for 1986-95 5.0L Mustangs and have shown significant gains in horsepower over existing designs in the 1,500 to 6,500 rpm range. That makes these intakes ideally suited for street and strip applications. The manifolds consist of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. The upper manifold is powdercoated light titanium gray.
( 5 )
$990.95
—
$1,081.95
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,106.95
—
$1,149.95
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds were developed for all 8,000 plus rpm applications such as drag racing and tractor pulling. They feature a 2-piece design with interchangeable top covers so you can mount either single or dual Dominator-style carbs. They're made from thick-wall A319 aluminum for durability and the lower manifold feature bosses for nitrous and fuel injection nozzles. The lower manifold and top covers are sold separately; both pieces are required to make a complete manifold assembly. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 2 )
$849.99
Edelbrock Victor spread-port intake manifolds are specifically designed for high-rpm drag racing engines using Brodix Big Duke or Dart Big Chief cylinder heads. They feature a runner section area of approximately 4.75 sq. in. The intake manifolds require port matching to the cylinder head for optimum performance and will produce higher top-end horsepower while maintaining consistency and throttle response.
Not Yet Reviewed
$887.95
—
$955.95
Trick Flow® Track Heat® EFI intake manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower from 1,500 to 6,500 rpm. These units are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. The manifolds have a 75mm throttle body inlet and are designed for use on non-EGR engines. Additional features: * Small cross-section with 12.200 in. runners * Overall height to the upper manifold flange is 10.200 in. * Overall height to the lower manifold flange is 4.625 in. * 2.000 in. x 1.200 in. port size at head * 2.000 in. x 1.200 in. port size at mating flange The upper plenums and lower manifold are also available separately.
( 3 )
$892.99
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$838.95
Summit Bucks
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$811.95
—
$844.95
Trick Flow® StreetBurner® EFI intake manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower from idle to 5,500 rpm. Trick Flow® StreetBurner® EFI intake manifolds are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. Additional features include: * Small cross-section with 15.000 in. runners * Overall height to the upper manifold flange is 10.200 in. * Overall height to the lower manifold flange is 4.625 in. * 2.000 in. x 1.200 in. port size at head * 2.000 in. x 1.200 in. port size at mating flange The upper plenums and lower manifold are also available separately.
( 4 )
$892.99
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$1,015.95
—
$1,081.95
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$752.95
—
$1,045.95
These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 10 )
$1,027.95
—
$1,068.95
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$849.99
$764.99
—
$849.99
Brodix cylinder heads single plane intake manifolds can deliver the power you need on the street, at the track, or on the strip. They're a single 4-barrel design that features a tall open plenum for increased flow, plus extended runners for improved flow velocity. This helps to boost power and makes the manifolds perfect for drag and oval track racing. If you're looking for even more power, models are available with bosses designed for nitrous hookup. Order the unit tailored for your application.
( 3 )
$1,047.99
FiTech intake manifolds provide you with great manifold and fuel rail package to start your project. The low-profile intake manifold is fabricated from T-6061 aluminum with 102mm inlet and a 1,500 to 6,500 rpm powerband. The billet fuel rails include AN fittings and fuel crossover. FiTech includes hardware, as well.
( 5 )
$778.00
Trick Flow® R-Series EFI Intake Manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower. The manifolds are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. These manifold kits are designed for use on non-EGR engines. Manifolds for 5.0L engines with a 75mm throttle body inlet produce power in the 2,500-7,250 RPM range. Manifolds for 90mm throttle body applications produce power in the 3,000-7,750 RPM range. Additional features: *Large cross-section with 12.000 in. runners *Overall height to the upper manifold flange is 11.000 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.
( 1 )
$794.99
—
$859.99
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$844.95
Holley Ford Hi-Ram carbureted intake manifold bases have a runner length and tapered cross section designed to perform well for a wide range of engine configurations. Holley's engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Holley Hi-Ram specs: * Cast aluminum construction * Available in natural or black finish * Plenum top gasket type—3/32 in. round O-ring cord
( 2 )
$799.95
Offenhauser's dual quad high-rise manifolds take the best of the company's 360 degree Equa-Flow technology and double it. Each 4-barrel sits on top of its own split plenum, which feeds straight, tapered runners that dive directly from the plenum to the intake ports. This results in extremely even, efficient cylinder filling, which eliminates flat spots and produces hefty power bands, starting as low as 1,800 rpm and running as high as 8,800 rpm. Edelbrock Performer series and Carter AFB carburetors are recommended. Some applications cannot mount Holleys in any manner.
( 1 )
$841.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
