Availability
Showing In Stock Items. Show All 34 Items.
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 395 )
$26.99
—
$50.99
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$32.99
—
$43.99
Dress up your existing intake manifold or ease installation of a new manifold with Summit Racing™ intake manifold bolts. They're made from rugged steel and plated for corrosion resistance, perfect for your next project.
( 46 )
$20.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$31.99
—
$49.95
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
—
$49.95
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
Summit Bucks
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$43.99
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$20.11
—
$29.59
Moroso intake manifold bolts are made from tough Grade 8 steel for high strength, and have a clear zinc plated finish that's great for appearance and corrosion resistance. To ease the installation and removal of modern manifolds, with their very limited clearances, these bolts have 12-point heads and come complete with close-tolerance washers. Choose the lengths needed for your small or big block application.
( 19 )
$31.19
—
$44.99
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$36.83
Standard Motor Products EGR valve control solenoids are just what you need to replace your worn-out factory units. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 5 )
$33.99
—
$47.99
Affix your intake manifold with ICT Billet bolt kits. These strong steel fasteners hold your manifold in place securely, so it may perform to your expectations. Secure your intake manifold for leak-free performance with a set of ICT Billet bolts.
( 23 )
$21.99
—
$25.99
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
Not Yet Reviewed
$50.99
Peterson manifold end rail spacers fill the gap between the manifold and lifter valley end rail when using raised port cylinder heads. These end rail spacers are available in various thickness. Installation hardware is included.
( 1 )
$42.99
—
$43.99
Trans-Dapt Performance intake manifold bolts feature Grade 5 construction for maximum reliability. They are available in gold iridited or chrome plated finishes for protection against corrosion. The Trans-Dapt Performance intake manifold bolts include hardened washers, increasing the surface and clamping force.
( 1 )
$24.99
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$39.95
—
$50.95
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$41.99
Trick Flow® Box-R-Series intake manifold logo plates are the perfect way to dress-up your Trick Flow® intake manifold. The aluminum plates have a machined Trick Flow® logo, and include self tapping screws for easy installation.
Not Yet Reviewed
$21.99
Bolt down your manifold with a set of these Gardner-Westcott intake manifold bolt kits. They are available in chrome plated or polished finishes, so they're sure to add a unique touch to your engine. Whether you own a Ford, Chevy, or Mopar, these Gardner-Westcott intake manifold bolt kits will have you covered.
( 34 )
$21.99
—
$46.99
Edelbrock 1994-95 Mustang EGR supply spacers are made from quality aluminum, and feature a natural finish. They are designed to be used with the 1994-95 Mustang throttle body adapters for Edelbrock 5.0L manifolds.
Not Yet Reviewed
$49.95
These Trick Flow® 5.0L Street EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Four 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 in. long 12 pt. bolts * Two TFS Street/Track Heat upper/lower flange gaskets * Four 5/16 x 2 5/8 in. long studs
Not Yet Reviewed
$43.99
Stage 8 locking intake manifold bolts are designed to stay put once they're tightened down. They are reusable, can be visually inspected, and install easily with no special tools.
( 3 )
$59.23
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
