Availability
Showing In Stock Items. Show All 29 Items.
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$205.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 565 )
$270.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 49 )
$328.99
$196.99
—
$275.99
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 229 )
$202.99
—
$239.99
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 44 )
$171.99
—
$279.99
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 28 )
$147.99
—
$260.99
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 138 )
$399.95
$219.95
—
$239.95
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 52 )
$281.95
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$235.99
—
$243.99
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$247.99
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$210.99
—
$279.99
Adapt your Chevrolet low deck big block manifold to your tall block engine with Moroso intake manifold spacer plates. They will allow you to use any high-performance big block Chevy manifold on a late-model Chevy tall block truck engine.
( 4 )
$215.99
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$219.95
These Edelbrock Victor Ram tunnel ram tops are designed to fit the Victor Ram manifold base. They are made of aluminum and come available in natural or polished finishes. Edelbrock Victor Ram tunnel ram tops are available for dual inline standard square-flange carburetors or dual sideways-mounted Dominator carburetors. A gasket is included, making your installation simple.
Not Yet Reviewed
$201.95
Edelbrock Victor tunnel ram top is for use with 4500 series carburetors and their Victor Tunnel Ram base manifolds only. They are designed with larger openings to accommodate throttle bore sizes up to 2.31 in. without modification and are wider to accommodate the larger runners in the new manifolds. Carburetors will need to be mounted sideways in order to clear the manifold.
Not Yet Reviewed
$270.95
On Sale
Holley Hi-Ram intake manifold plenum tops are constructed of cast aluminum and offered in different finishes to match the bases. They are available in dual 4150 or 4500 pattern, or in a full blank top so that you can design your system. Choose the ideal plenum for your Hi-Ram manifold.
Not Yet Reviewed
$228.95
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts.
( 7 )
$125.95
Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit
( 2 )
$244.44
Producing power and torque comparable to single-plane manifolds, the Top Street Performance dual-plane air gap intake manifolds retain the drivability and throttle response like other dual-planes and performs best between 1,500 and 6,500 rpm. The manifold's improved design is complimented by an open area under the plenum—a feature that ensures less heat transfer from the engine, meaning the air/fuel charge will be cooler and produce more power and torque. These dual-plane air gap intake manifolds are cast from lightweight aluminum and feature a relatively low-profile for great hood clearance. Additional provisions include dual distributor hold-downs, four corner water ports, nitrous bosses, and a square bore carburetor flange.
Not Yet Reviewed
$266.66
Adapt your Chevrolet low deck big block manifold to your tall block engine with these Weiand intake manifold spacers. They will enable you to use any high performance big block Chevy manifold on late model Chevy tall block truck engines.
( 3 )
$298.99
S&S Cycle O-ring style manifold for classic Big Twin motorcycles are stock cylinder length and will work with S&S and several other carburetors. These T-style intake manifolds can potentially improve low-end torque by creating a more consistent air flow between cylinders, especially on large displacement Big Twin engines.
Not Yet Reviewed
$109.76
NotcHead intake manifold bolt kits offer their unique, seven-notched design forged from high-grade stainless steel and CNC finished for strength and a beautiful appearance. Each bolt comes with a neoprene bonded stainless steel washer. Used along with NotcHead custom engineered sockets, you can eliminate the occurrence of "rounded off" bolt heads—a common and frustrating problem with traditional button heads. Dress up your intake manifold with NotcHead bolt kits.
Not Yet Reviewed
$105.17
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
