Availability
Showing In Stock Items. Show All 162 Items.
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$509.95
—
$754.95
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 29 )
$748.00
Summit Bucks
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
Summit Bucks
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
Summit Bucks
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$509.95
—
$865.95
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$683.17
Edelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!
( 7 )
$637.95
—
$854.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$838.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$1,149.95
$649.95
—
$749.95
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$500.85
—
$742.34
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$549.95
—
$844.95
What's tall, good-looking, and makes tons of power? Trick Flow's® R-Series intake manifold for Mopar 440! Trick Flow® engineers went to work when customers requested an ultra-performance intake manifold for large cubic inch, high-horsepower, big block Mopar engines. The key to the manifold's high-power production is the CAD-optimized, one-piece single plane runner design with a large open plenum—paying special attention to smooth airflow for equal air and fuel distribution. Nitrous users will be happy to find integral bosses that can be drilled and tapped for nozzles, while all engine builders will be glad that Trick Flow® left material around the port openings so the manifold can be port matched and/or fully ported. To keep weight as low as possible, the R-Series intake manifold is made from lightweight yet strong cast aluminum. When it comes to carburetion, you'll find that Trick Flow® machined on a Holley 4500 Dominator mounting flange for maximum performance potential. Designed to produce maximum power with Trick Flow's® PowerPort 270 cylinder heads on 440-based engines working in the 3,500-7,500 plus RPM range, the R-Series intake manifold also performs extremely well with other brand cylinder heads using 270cc and larger intake ports.
( 3 )
$524.99
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$552.95
—
$681.95
Summit Bucks
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$583.99
—
$669.99
RHS LS cathedral port sheet metal intake manifolds provide race-developed technology for the street. They offer great aesthetics often associated with high-budget race engines. These fabricated manifolds are the perfect way to complete your engine—from each high-strength and durable TIG weld to the clean sheet metal bends and contoured runners. They don't just look good; they will help your engine achieve peak potential. Features of RHS LS cathedral port sheet metal intake manifolds include: * Black anodizing with a textured finish * Scalloped fuel rails further set this intake apart * Excellent performance in high-rpm naturally aspirated engines, as well as boosted applications * Big plenum, short runner design optimal performance * High-quality, durable construction ensures great fitment and reliability * 3mm thick aluminum construction resists flexing * Tested to over 25 psi of boost * Includes billet aluminum fuel rails, fittings, hardware, and gaskets
Not Yet Reviewed
$649.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 27 )
$649.95
—
$699.95
Trick Flow® R-Series A460 Intake Manifolds deliver significant performance gains in 500-plus cubic inch engines. They are single quad intake manifolds made from lightweight A319 aluminum and include bosses for nitrous or fuel injection. The special one-piece, spider-type design with high-flow, extended individual runners and a raised plenum floor produces sizeable power increases in the 3,500-8,000 rpm range. Additional highlights include extra material for custom porting and a Dominator-style carb mounting pad. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 3 )
$749.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
Not Yet Reviewed
$569.95
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$519.95
—
$801.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
