Availability
Showing In Stock Items. Show All 73 Items.
ACDelco GM Genuine Parts intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are GM recommended replacements for your vehicle's original component. They are manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.
( 13 )
$99.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$109.99
Standard Motor manifold actuators allow for control over the amount of air entering the manifold, providing improved engine performance. They restore proper variable intake manifold function, engine power, fuel economy, and drivability. Every model is designed with high-stress metal to prevent intake linkage failure. These replacement parts are engineered to meet or exceed OE performance. Order the model recommended for your vehicle.
( 1 )
$50.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$83.95
—
$100.95
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$80.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$74.99
—
$99.99
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 259 )
$50.99
—
$78.99
ARP's rugged, studs are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling while promoting more consistent torque loading. These studs include 12-point nuts and washers.
( 41 )
$64.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 87 )
$64.99
—
$111.99
Holley intake manifold studs are made of high-quality steel construction for long-lasting durability and performance. They are designed to be used with Holly Hi-Ram style intake systems to give them peak performance. If you have a new Hi-Ram system you're throwing in your ride, make sure you don't forget to grab a set of these Holley intake manifold studs.
( 1 )
$75.05
—
$88.39
Seal up your engine while looking good with one of these ICT Billet LT lifter valley covers. They are designed to fit Gen 5 LT engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 2 )
$99.99
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
Standard Motor intake manifold runner control valves are direct-fit replacements for OE damaged units to provide proper data regarding linkage and plate position to the powertrain control module. Designed to restore fuel efficiency, eliminate stuttering, and revive engine performance, every intake manifold runner control solenoid is manufactured with high-grade materials for prolonged life and superior performance in harsh environments. OE-quality connectors and terminals ensure a perfect fit connection to the engine wire harness. Order the model for your application.
( 2 )
$56.99
—
$96.99
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$50.95
—
$103.99
Dorman EGR valves effectively recirculate exhaust gas to be re-burned in the intake manifold where the engine can burn it again. This reduces emissions and ensures that your vehicle is performing at its maximum potential. When your EGR valve isn't working properly, it can result in reduced performance or increased fuel consumption. Dorman parts are direct-fit replacements to ensure a proper fit.
( 10 )
$53.99
—
$104.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 37 )
$55.99
—
$103.99
Standard Motor Products T-Series EGR valves help you get maximum fuel efficiency and power from your engine. Standard T-Series is a competitively priced line containing some of the most popular part numbers for whenever an installer grade product is called for. Properly operating EGR valves are essential to help your vehicle run flawlessly. Replace your vehicle's worn or malfunctioning EGR valves with these reliable replacements from Standard Motor Products. Standard T-Series EGR valves rotate 360 degrees to accommodate multi-fit applications with the required washers.
( 2 )
$51.99
—
$75.99
Stick on horsepower! Heatshield Products I-M shields reduce heat radiating from the top of the motor significantly. This creates a more dense fuel and air mixture, in turn creating more power. Think of them as intercoolers for your intake, with the same physics and chemistry, but just a different execution. They include heavy-duty adhesive that will stick to any clean, semi-smooth surface. Simply degrease and clean the surface, wipe it with pre-paint cleaner or isopropyl alcohol, let it dry, and then firmly press the Heatshield Products I-M shields onto the underside of the intake manifold. Features include: * Withstands 1,100 degrees F radiant continuous, 2,000 degrees F intermittent * Adhesive good for 300 degrees F * Lower intake temperatures * Increases up to 12 RWHP
( 27 )
$80.99
—
$127.99
ACDelco GM Genuine Parts EGR valves are emission control devices and GM recommended replacements for your vehicle's original part. The EGR (Exhaust Gas Recirculation) valve modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. These GM Genuine Parts EGR valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 18 )
$54.99
—
$97.99
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$62.45
MSD LT1 Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifold. The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$92.19
BBK spacers are designed to lower air and fuel temperatures significantly by reducing the heat transfer from the lower manifold to the upper manifold. The spacers are made of durable phenolic resin and are CNC-machined to ensure a perfect fit. Each spacer comes with gaskets and bolts as needed.
( 6 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
