Availability
Showing In Stock Items. Show All 54 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$109.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$83.95
Summit Bucks
ACDelco GM Genuine Parts intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are GM recommended replacements for your vehicle's original component. They are manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.
( 13 )
$97.99
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$96.99
ARP's rugged, studs are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling while promoting more consistent torque loading. These studs include 12-point nuts and washers.
( 41 )
$64.99
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$50.99
—
$73.99
Holley intake manifold studs are made of high-quality steel construction for long-lasting durability and performance. They are designed to be used with Holly Hi-Ram style intake systems to give them peak performance. If you have a new Hi-Ram system you're throwing in your ride, make sure you don't forget to grab a set of these Holley intake manifold studs.
( 1 )
$75.05
—
$88.39
FAST intake manifold hardware kits come complete for specific FAST intake manifolds. The kits are made from stainless steel for longevity and have an Allen head design for optimal bolt head clearance for installation.
( 2 )
$61.95
—
$94.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$58.95
—
$61.95
ICT Billet intake plenum spacers give your project a lift. These risers are made from aerospace-grade billet aluminum and will include bolts for the install.
( 1 )
$72.99
—
$99.99
These show quality intake manifold bolts from Mr. Gasket are individually polished to a high luster, then chrome plated for lasting beauty. They're ideal for street rods and street machines, or any vehicle requiring show quality chrome.
( 4 )
$87.05
Ford Performance intake plenum spacer kits are CNC-machined from Westinghouse Type C phenolic material. These spacers fit between the upper and lower intake manifold to help dissipate heat and significantly increase performance. Mounting hardware is included. They are available to fit stock pushrod 5.0L Mustang GTs and for Ford Performance Cobra intake manifolds.
( 13 )
$77.99
—
$97.99
Standard Motor intake manifold runner control valves are direct-fit replacements for OE damaged units to provide proper data regarding linkage and plate position to the powertrain control module. Designed to restore fuel efficiency, eliminate stuttering, and revive engine performance, every intake manifold runner control solenoid is manufactured with high-grade materials for prolonged life and superior performance in harsh environments. OE-quality connectors and terminals ensure a perfect fit connection to the engine wire harness. Order the model for your application.
( 2 )
$56.99
—
$96.99
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$55.65
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$51.39
—
$93.89
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$62.99
—
$72.99
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 396 )
$50.99
—
$94.99
MSD LT1 Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifold. The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$92.19
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
Not Yet Reviewed
$50.99
These Trick Flow® Box-R-Series Upper Intake Manifold Flange Plates are direct replacements for your Trick Flow intake manifold.
( 2 )
$79.99
These Trick Flow® steel intake manifold bolt kits have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® steel intake manifold bolt kits are heat-resistant and come in a chrome finish.
( 3 )
$60.99
Chevrolet Performance offers these intake manifold bolts for securing your manifold with confidence. They're rated at 170,000 psi and will give consistent torque load.
Not Yet Reviewed
$74.32
Clearance
Dorman intake manifold runner control valves are designed to stay closed at lower rpm to improve low-speed and cold-engine performance. At higher rpm, the valves completely open to improve high-speed engine performance. Get your engine performing at its best again with one of these Dorman intake manifold runner control valves.
( 12 )
$72.78
—
$96.95
Stage 8 locking intake manifold bolts are designed to stay put once they're tightened down. They are reusable, can be visually inspected, and install easily with no special tools.
( 3 )
$59.23
—
$66.27
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
