Filters
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 429 )
$356.95
—
$615.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 557 )
$257.95
—
$597.95
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 308 )
$322.95
—
$620.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 215 )
$281.95
—
$578.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 32 )
$494.95
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 60 )
$404.95
—
$535.95
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$440.95
—
$597.95
Ford Performance Parts has done it again. You can now put the same intake manifold on your Mustang that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. Additional features include: * Includes unique Ford Racing intake badging *O-ring intake gaskets included * Boss 302 Intake Manifold Installation Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation (minor wiring harness modifications required) * Calibration is required to prevent engine damage! * Calibration not included * Boss 302 air inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-14 Mustang GTs
( 19 )
$264.99
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 6 )
$499.99
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 25 )
$412.65
—
$497.70
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 21 )
$284.95
—
$460.95
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 152 )
$299.95
—
$398.95
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 62 )
$379.95
$284.95
—
$359.95
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$470.93
Trick Flow® Track Heat® intake manifolds are precision CNC-machined from A319 aluminum to reduce weight and give your small block Mopar engine more power. The manifold's one-piece spider-type design with extended high-flow runners and raised plenum floor provide significant increases between 3,000 to 7,000 rpm--right where it's needed the most. Trick Flow also provided extra material around the port openings for custom port matching and added bosses that can be drilled for nitrous nozzles. Any 4150-style square bore carburetor bolts up to the Track Heat intake, and with a carburetor mounting pad height of 5.125 in., the manifold should fit under most hoods.
( 5 )
$466.99
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$322.95
—
$514.95
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$370.95
—
$587.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
Turn up the heat up on big performance with Trick Flow® Track Heat® intake manifolds for your Ford 351C or Clevor. These single plane aluminum manifolds feature a high-rise, one-piece spider design and high-flowing individual extended runners for significantly more power in the 3,000-7,000 rpm range. Other features include OE 2V port locations and dimensions, a raised plenum floor for increased flow velocity and fuel atomization, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. The manifolds will work in all 2V and 4V applications and with all square bore four barrel carbs.
( 8 )
$411.99
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 138 )
$259.95
—
$475.95
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$371.99
—
$469.99
These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 10 )
$545.95
—
$581.95
Revolutionize the way your engine performs with power-boosting Weiand Track Warrior intake manifolds! Designed for high performance engine applications, they are ideal for mean street machines as well as for competition super-class big block powerplants. They are computer engineered and dyno-proven to produce more horsepower and torque as a result of superior cylinder-to-cylinder distribution, giving the Track Warriors the edge over the competition and ensures safe, consistent air/fuel ratios for your engine. Plus, permanent mold castings provide weight savings of 10 to 20 percent over traditional sand cast pieces while maintaining inform wall thickness for porting. So, when you look for the pinnacle of performance, price and quality, just look to Weiand.
( 26 )
$429.95
—
$479.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
