Availability
Showing In Stock Items. Show All 97 Items.
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$374.95
—
$605.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$617.95
$270.95
—
$584.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$296.95
—
$595.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$575.95
$339.95
—
$540.95
Ford Performance Parts has done it again. You can now put the same intake manifold on your Mustang that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. Additional features include: * Includes unique Ford Racing intake badging *O-ring intake gaskets included * Boss 302 Intake Manifold Installation Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation (minor wiring harness modifications required) * Calibration is required to prevent engine damage! * Calibration not included * Boss 302 air inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-14 Mustang GTs
( 19 )
$312.99
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$339.95
—
$540.95
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
Summit Bucks
Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit
( 2 )
$293.34
—
$333.34
Ford Performance Parts 289/302 dual plane performance intake manifolds are designed for use on small block engines fitted with production heads and inline valves. They can mount either the stock 4-barrel carburetor or an aftermarket Holley. With their excellent fuel distribution and midrange power band from 1,500 to 6,500 rpm, they're ideal for use on high performance street and mild race applications. Additional features include: * For use with 8.206 in. deck height blocks * Do not fit "Z" or the GT-40 "X" heads
( 9 )
$384.99
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$395.95
—
$530.95
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$605.95
$407.95
—
$484.76
Replace your broken or cracked intake manifold with an updated 1999-2004 Mustang GT 4.6L 2V PI intake from Ford Performance! The factory GT intake manifold had a plastic coolant crossover that eventually cracked over time, causing increased heat and wear to your engine. Ford Performance has now updated this intake manifold with a new runner design and tooling used to bring back a PI intake manifold. One of the largest improvements was to update the gaskets on the intake to more modern integrated O-ring seals for an easy installation without extra gaskets needed. Another major improvement was the change to an all-aluminum coolant crossover with two sensor bungs, which works with multiple applications. All mounting locations are reinforced and have metal threaded inserts for the fuel rail, coil packs, and lower intake plenum, compared to threading into plastic like other aftermarket options. Ford Performance also includes a new 195 degrees thermostat, thermostat gasket, and alternator bracket. Additional details: * Larger bell mouth * Shorter runner * More rounded runner * Deeper plenum * Fits 1999-2004 Power Improvement (PI) heads * Designed for off-road use; can be used on 1996-98 engines with Performance Improvement (PI) heads (custom calibration required) * Additional parts and modifications may be required * Eliminate irritating coolant leaks and ensure the engine in your 1999-2004 Mustang GT is performing as it should
Not Yet Reviewed
$467.99
Dart SHP Special High Performance dual plane intake manifolds flow more air than comparable intakes. They feature long, separated runners for bottom-end and midrange power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. Designed to mount single, square-bore 4-barrels and make power from idle all the way to 6,000 rpm, Dart SHP dual plane intake manifolds are the perfect choice for your street/strip vehicle.
( 30 )
$365.68
Earl's Performance LS steam vent kits eliminate trapped air and steam from your engine to prevent hot spots and overheating. They offer a selection of these LS power plumbing kits, with the appropriate braided stainless steel Speed Flex hose with hose ends that make installation easier and much more attractive than OEM hard lines. Plus, they provide more flexibility when you're using aftermarket intakes and other accessories on performance vehicles. The kits are available in front and 4-corner plumbing options, with adjustable anodized aluminum steam vent adapters and/or distribution blocks. Plumb your LS for performance with Earl's steam vent kits.
( 5 )
$299.95
—
$349.95
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
If you are looking for the right manifold for your 289 or 302, look no further than these single plane intake manifolds from Ford Performance Parts. Features include: * High-rise, short-runner design intake manifold * Cast from 356A aluminum * Designed for 8.2 in. deck height blocks * Tapered ports sized for moderate-flow heads * Standard Holley carb pattern * Un-machined injector bosses * Designed for Windsor-style heads * Slotted holes for addressing decked blocks * 6.00 in. carburetor pad * 4,000-8,000 rpm range
( 12 )
$434.99
Chevrolet Performance rectangular port dual-plane intake manifolds are for those who honor the tradition that states: If you're going to make power with a big block Chevy, you have to use rectangular port heads. These intakes have two separate plenums which accept air/fuel from the carburetor—ensuring less overlap between induction pulses. The result is a cleaner pulse, particularly at low rpm. Chevrolet Performance manifolds are constructed to deliver superlative airflow and horsepower, and can be used with high performance aluminum or cast iron heads.
Not Yet Reviewed
$465.95
High-rise Chevrolet Performance oval port dual plane intake manifolds are the latest in dual plane design thinking and technology. They're intended for all big block Chevrolet 396-502 c.i.d. engines with either current oval port aluminum heads or 1975 and earlier large oval port iron heads. They're set up for a single 4-barrel and have dual bolt patterns on the carburetor flange. There is no provision for hot-air chokes, and they will not fit some Corvettes with limited hood clearance.
( 10 )
$438.09
—
$476.43
Single plane Chevrolet Performance Parts' Eliminator Vortec intake manifolds mount a single high-flow 4-barrel with a runner and plenum configuration, fine-tuned to produce maximum power and torque from Vortec heads. An open "air-gap" space under the runners is engineered to reduce heat transfer to the intake charge, which helps to further maximize power.
( 2 )
$523.45
Tuned Port Injected (TPI) engines with Vortec heads are a reality, thanks to the Chevrolet Performance team. Their engine dynometer tests have shown a 40 hp gain with the new Vortec TPI base plate and stock Vortec heads versus the stock L98 engine. The Vortec TPI base manifold was designed from the original GM TPI intake to be a universal fit for Chevrolet/Pontiac cars (1985-92) that were equipped with factory Tuned Port Fuel Injection—and the cylinder heads have been replaced with the new style raised-port improved flowing Vortec heads from Chevrolet Performance. * Performance gains: In-house testing has proven a gain of 40 hp over a stock L98 engine. The larger runners of the TPI Vortec baseplate, combined with the excellent flow characteristics of the GM Vortec heads, produced 300 hp on an otherwise stock L98 engine. Other modifications such as camshafts, rocker arms, and injectors produced as much as 375 hp with the stock computer and throttle body. Testing was performed with a mass airflow (MAF) sensor system. * Minor modifications required: TPI Vortec baseplates are a universal design that we patterned after the original GM TPI baseplate. Because it is a universal design, you should first test fit all components that bolt directly to the intake and make any required modification prior to final installation. Some modifications may be required of the external components related to the intake and EGR systems.
Not Yet Reviewed
$449.95
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
