Availability
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$2,114.95
—
$2,746.95
The world famous Holley Tri-Power carburetor system is legendary in Chevrolet circles. They were the ultimate power statement, coming factory on cars like the 1967 427 Corvette. With Holley Tri-Power 3x2 intake and carburetor kits, you can have the same look on your SB Chevy. These setups are perfect for muscle cars, street rods, classic hot rods, rat rods, trucks, and many more vehicles. You can cruise around economically on the 325 CFM center carb, and when you decide to step on it, the two 350 CFM outboard carbs kick in for head-snapping performance! Holley Tri-Power kits are available with dichromate or shiny finish carburetors. Choose your favorite. Systems include: * Weiand dual plane medium rise 3x2 intake manifold * Three Holley 2-barrel carburetors -- Two 350 CFM outboard carburetors -- One 325 CFM center carburetor with electric choke * High-quality steel fuel lines * Progressive throttle linkage * Reusable air filters with polished housings
Not Yet Reviewed
$2,699.95
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$2,199.99
LS Classic Series '63 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's second generation mechanical fuel injection system found in 1963 to 1965 Corvettes while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. The intake kits include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '63 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
The LS Classic Series Tri-Power intake manifold kits are designed to pay tribute to the baddest big block Corvettes of the late 1960's while using modern technology for ultimate performance. The intake kits are built around a modified single-plane, dual-carb aluminum intake manifold that requires dual 92mm GM four-bolt throttle bodies and LS3/EV6 or LS1/EV1 fuel injectors and accepts the LS Classic Series Tri-Power air cleaner. These kits also includes 4150 carb adapter plates, throttle body to air cleaner clamp assemblies, mounting fasteners, and cotton gauze air cleaner. These Tri-Power kits also require the use of an engine control unit and harness that will support dual drive-by-wire throttle bodies. LS Classic Series Tri-Power intake manifolds are available to work with rectangular or cathedral-port LS cylinder heads.
Not Yet Reviewed
$2,353.95
It's time to choose the centerpiece of your boosted engine build. Second to only the supercharger or turbocharger, the intake manifold will be the focal point of your build illustrating the power and strength of what's underneath. Billet aluminum is the usual choice, but is there something better? Absolutely! Performance Design's Carbon TRc (Tunnel Ram compact) intake manifolds offer you a more distinct, ultra-modern, elegant, and lighter manifold at a lesser cost. An evolution of their Carbon TR naturally aspirated and Carbon TRic (intercooled) boosted intake manifolds, they are the next generation of underhood, short runner models optimized for boost, but do not rule them out of a naturally aspirated application where fitment and aesthetics are preferred over peak torque. They maintain the carbon fiber and billet aluminum construction, manufacturability within a desired price target, fitment under the stock hood, and versatility of subcomponents to be used across a wide range of applications. The modular design of the Carbon TRc intake manifolds start with a carbon fiber one-piece molded plenum. Carbon fiber braided sleeve layers with alternating weave directions are wrapped around a bladder, inserted into a billet aluminum mold, pressed against additional hand-laid carbon fiber fabric, and infused with resin. Vacuum, pressure, and heat are applied creating a plenum that is a strong pressure vessel without seams or bonding capable of handling over 50 psi of boost. Runners are CNC-machined, 6061 T-6 aluminum manufactured in two pieces to sandwich the plenum. A short velocity stack plate is installed inside the plenum and the outer runner bank bolts through the carbon fiber plenum into the velocity stack plate and is sealed with O-rings. A billet aluminum throttle body flange is bonded to the front of the carbon fiber plenum with aircraft-grade adhesive. Billet aluminum fuel rails are also available for port fuel applications or to add port fuel to direct-injected applications. Performance Design's Carbon TRc intake manifolds are available for a wide range of applications, including LT1/LT4, LS3/L92, LS7, LS1/LS2/LS6, Godzilla, Coyote, and Hemi. Select the one designed for your engine in the finish preferred. Specifications and features: * One-piece molded carbon fiber plenum * 6061 T-6 billet aluminum runners and throttle body flange * Nitrous bosses in runners * Factory MAP, PCV, and canister purge solenoid connections * Includes stainless steel hardware for installation * Includes molded port and throttle seals * Intake can be reversed on the engine * Billet aluminum component finishes: -- Raw -- Clear -- Black Cerakote
Not Yet Reviewed
$3,199.99
—
$3,699.99
LS Classic Series '62 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic Corvette "flat top" mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '62 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$2,075.95
—
$2,126.95
FAST LSXHR intake manifold intercoolers are a great solution to cool the air charge on a centrifugal-supercharged or turbocharged engine using one of the popular high-ram style intake manifolds, such as the FAST LSXHR composite manifold. The air-to-water intercooler conveniently fits between the upper and lower intake manifold, simplifying the installation, while saving space, time, and cost. Testing conducted on a 1,350 HP/20 psi turbocharged-LSX application showed a 198-degree F drop in temperature and less than 1 psi loss across the intercooler. FAST LSXHR intake manifold intercoolers feature: * Convenient placement minimizes underhood piping fabrication * Large -16AN water inlet/outlets * Welded billet construction * O-ring sealing on both air and water sections‚ necessary hardware included * Durable black powdercoated finish * Designed to work with the LSXHR 103mm intake manifold
Not Yet Reviewed
$2,094.95
LS Classic Series LT4 supercharger lids provide a slick vintage look for your modern supercharged LT4 engine. Featuring finned aluminum construction and machined highlights, they are offered in two finishes with or without the Corvette flag emblem. These GM LT-4 lids are direct replacements for factory lids, and can be installed in as little as 15 minutes. Enhance the look of your supercharger with an LS Classic Series LT4 supercharger lid. Select the finish you prefer.
Not Yet Reviewed
$2,099.95
—
$2,249.95
Dorman EGR coolers are designed to prevent coolant leaks into your exhaust manifold and help protect your engine from extensive damage. They are manufactured from stainless steel specifically your diesel vehicle and quality-engineered to cool exhaust gas and recirculate it back to your engine. The tube design increases part longevity, helps to reduce soot collection and clogging, and prevents issues with radiator-style EGR coolers. All necessary O-rings, gaskets, and hardware are also included to help facilitate a complete repair job. Keep your big rig legal and performing its best with one of these EGR coolers by Dorman.
( 3 )
$2,437.99
—
$2,746.99
Dorman heavy-duty EGR coolers are a direct replacement cooler that has been designed to match the fit and performance of the original. They are manufactured from stainless steel specifically for your diesel vehicle and quality-engineered to cool exhaust gas and recirculate it back to your engine. These coolers have been rigorously tested for heat transfer, burst testing, and vehicle try-on testing to ensure fit and reliability. The heavy-duty EGR coolers include all necessary O-rings, gaskets, and hardware for a complete repair job. Keep your big rig legal and performing its best with one of Dorman heavy-duty EGR coolers.
Not Yet Reviewed
$2,239.99
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$2,202.99
Mast Motorsports Mozez forward facing intake manifolds are available in standard and tall deck models, with a single fuel rail to fit eight injectors or a dual fuel rail to fit all 16 injectors. These redesigned, new generation Mozez intakes come with an optimized lower intake (casting) fully CNC-ported to match Mozez Gen 2 cylinder heads. The manifolds include a fully CNC'd billet lid, as well as a forward facing throttle body adapter. Get the looks and the go fast, too! Product features: * For standard or tall deck height LSX engine (your choice) * 125 mm Accufab throttle body mounting * Designed Boss to fit blower shop burst panel * Fits GM Gen III and GM Gen IV LS engines * Fits only with Mozez cylinder heads * For racing purposes only * Comes with fuel injector rails and brackets
Not Yet Reviewed
$5,100.00
An engine's cylinder heads and intake manifold must work together as an integrated system to produce maximum performance. The intake charge should make a seamless transition from the manifold runners to the cylinder head ports. Dart has optimized the port shape, the plenum volumes, and the runner angle for each application. These aluminum LS intake manifolds are offered in a variety of configurations, with raw, CNC, or injection ports. The single-plane units are designed for 4-barrel square bore carburetor mounting. Order the style preferred for your LS application.
Not Yet Reviewed
$2,455.01
Cummins by Mopar replacement EGR valves will restore proper control of the flow and recirculation of exhaust gasses. They are quality components providing OE fit and performance, as well as reliability and durability you expect and need. These valves are available for more than a hundred Dodge and Ram diesel applications from 2007 and up. Order the model recommended for your vehicle.
Not Yet Reviewed
$3,452.99
LS Classic Series '57 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic original mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '57 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
Summit Racing™ Turbocharger Hot Side combo kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. Each of our combos contain BTR multi-layer header gaskets, an ARP chromoly head bolt kit, and Precision Turbo and Engine turbocharger gaskets, along with a Summit Racing™ Pro LS turbo manifold and wastegate. Completing each combo will be one of our 2700 Series performance turbochargers or a VS Racing turbocharger. Choose the combo best suited to your power needs. Contents and features: * BTR LS multi-layer steel gasket * ARP chromoly head bolts--12-point, rated at 170,000 psi to handle severe conditions * Precision Turbo and Engine turbocharger gaskets—stainless steel, provides a positive leak-free seal in high-temperature situations * Summit Pro LS turbo manifold—universal, 304 cast stainless steel, T4 flange, designed to handle the heat and horsepower * Summit wastegate--stainless steel base and 6061 aluminum cap with black anodized finish * VS Racing turbochargers with T4 housing * Summit 2700 Series performance turbochargers--T4 turbine housings--true race turbos offering the latest in compressor aero technology with quick-spooling and free-flowing turbines specially designed, balanced, and precision assembled with 2618 billet forged compressor wheels for class leading racers.
( 2 )
$2,133.31
—
$2,428.31
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
