Availability
Showing In Stock Items. Show All 109 Items.
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$205.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 45 )
$257.99
$109.99
—
$242.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 48 )
$340.99
$180.99
—
$275.99
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 565 )
$216.95
—
$270.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 22 )
$299.95
BluePrint Engines dual plane intake manifolds are perfect to top any 302 based engine. Capable of supporting over 400 hp, these cast aluminum replacements are a perfect match for BluePrint HP9008 and HP9009 headed engines, or Windsor iron headed engines. The manifolds are a great addition to performance heads. Bolts and gaskets are included. Additional details (P/N: MLL-BPP302INT): * Engine block style: SBF 302, Stock/OEM standard deck * Cylinder head style: Windsor * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 5.813 in. * Intake finish: Natural * Note: This intake manifold features Windsor intake bolt pattern. This is the production intake manifold used on BluePrint SBF engines 302-347 c.i.d. May not be compatible with OEM chokes or OEM accessory mounting brackets. Does NOT fit 351W based engines, Cleveland, or GT40 applications.
( 5 )
$215.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 15 )
$169.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 229 )
$198.99
—
$239.99
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 44 )
$171.99
—
$293.99
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$170.95
Your modified LS-powered cars and trucks will be easier to service with an upgrade to a race car plumbing system. These plumbing kits contain black anodized billet aluminum fittings, O-rings, stainless steel bolts, and all of the necessary hose to plumb just the front of the heads or all four corners. Choose the most desirable upgrade to your factory steam tubes--Trick Flow® engine steam line plumbing kits for GM LS.
( 75 )
$138.95
—
$148.95
ICT Billet intake manifold adapters mate cylinder heads to intake manifolds or supercharges. They are offered to adapt a variety of cylinder heads and intakes. The plates are made from aerospace-grade 6061 T-6 billet aluminum. The kits come with adapter plates and O-ring seals. Depending on the specific application, different length intake manifold bolts may be required (not included).
( 8 )
$239.99
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 28 )
$136.99
—
$249.99
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 138 )
$399.95
$219.95
—
$239.95
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 51 )
$299.95
$224.95
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$349.99
$249.99
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 52 )
$281.95
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 87 )
$107.99
—
$111.99
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$235.99
—
$243.99
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$186.99
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$200.99
—
$279.99
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$229.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
