Availability
Showing In Stock Items. Show All 37 Items.
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$449.95
—
$519.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$481.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$644.95
Edelbrock Performer manifolds are designed for street 1987-94 Chevy V6s with factory throttle body injection. They provide outstanding throttle response and torque increases. They accept all factory accessories and hardware, and your throttle body stays in its stock location. A computer chip is available at no charge and is street-legal for 4.3L trucks (E.O. #D-215-21). Return the postage-paid card that comes with the manifold to receive the chip from Edelbrock.
( 10 )
$595.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 226 )
$44.95
Summit Bucks
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$72.99
—
$183.99
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$32.99
These show quality intake manifold bolts from Mr. Gasket are individually polished to a high luster, then chrome plated for lasting beauty. They're ideal for street rods and street machines, or any vehicle requiring show quality chrome.
( 4 )
$87.05
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$109.99
Edelbrock exhaust crossover plugs are designed mainly for use in marine or off-road applications. They are made of cast iron and install into the exhaust crossover without any modifications.
( 14 )
$23.95
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$638.95
—
$681.95
Whether you're doing an intake gasket change or a complete rebuild, Mahle Original intake manifold bolts will get you up and running in no time. With over 100 years of experience under their belt, Mahle's quality is sure to meet or exceed OE standards for fit and function. Mahle Original intake manifold bolts are available for a variety of applications.
( 1 )
$31.99
ACDelco GM Genuine Parts EGR valves are emission control devices and GM recommended replacements for your vehicle's original part. The EGR (Exhaust Gas Recirculation) valve modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. These GM Genuine Parts EGR valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 18 )
$97.99
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$746.95
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 37 )
$32.99
—
$124.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$100.95
—
$291.95
Dorman EGR valve control solenoids are designed to inhibit EGR operation during conditions where it could adversely affect engine performance and vehicle drivability. Dorman EGR valve control solenoids restores the critical emissions functionsand engine performance cuased by a failed EGR valve solenoid.
( 2 )
$41.99
Dorman EGR valves effectively recirculate exhaust gas to be re-burned in the intake manifold where the engine can burn it again. This reduces emissions and ensures that your vehicle is performing at its maximum potential. When your EGR valve isn't working properly, it can result in reduced performance or increased fuel consumption. Dorman parts are direct-fit replacements to ensure a proper fit.
( 10 )
$83.95
—
$132.95
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$48.95
—
$127.95
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$80.99
Offenhauser 360 degree Equa-Flow Single-Quad high-rise intake manifolds feature a design for full-capacity operation. This combination of unrestricted fuel-air flow and a divided plenum means no flat spots throughout the entire rpm range. What does all this mean? The equal fuel flow to each cylinder increases horsepower and torque, while evening-out individual cylinder temperatures. Power bands start as low as 1,800 rpm with a small carb and climb all the way to 8,800 rpm with a big one.
( 2 )
$642.99
Hella EGR valves are produced in line with high-quality standards and the product range is always being expanded. The EGR valve is the most important component of the system, as it provides a connection between the exhaust pipe and the intake manifold. Depending on the actuation, the EGR valve releases the valve opening and allows exhaust gas to flow into the intake manifold. Hella EGR valves are available in different versions: single or double diaphragm design, with or without position feedback or temperature sensor, and, of course, electrically controlled. Position feedback means that a potentiometer is fitted to the EGR valve and provides the control unit with signals about the position of the valve. This enables recirculated exhaust gas volume to be accurately recorded in each load condition. A temperature sensor, if fitted, is used for the EGR valve's self-diagnostics. Order the model required your application needs.
Not Yet Reviewed
$144.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
