Availability
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 58 )
$199.99
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 397 )
$28.99
—
$29.99
Trick Flow® R-Series intake manifolds for small block fords are designed for maximum power delivery on heavily modified street/strip and race engines that operate in the 3,500-7,500+ rpm range--right where it's needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. These carb-style EFI manifolds accept standard Bosch or Siemens-type fuel injectors. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
( 4 )
$468.99
Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit
( 2 )
$293.34
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$11.99
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$39.99
—
$73.99
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$47.95
—
$49.95
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$245.95
—
$298.95
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$22.94
$20.65
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$49.95
Designed for engines that work in the 3,500-8,000 rpm range, Trick Flow® Track Heat® intake manifolds for your Ford 429/460 deliver race-like power and torque. These single plane high-rise manifolds feature a one-piece spider design, high-flow extended individual runners, a raised plenum floor for improved fuel atomization and flow velocity, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. These Track Heat® manifolds are made from A319 aluminum and are for use with square bore four barrel carbs.
( 6 )
$699.99
ATP replacement intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are ideal replacements for your vehicle's original component. They are manufactured to fit your vehicle, providing you with the same performance, durability, and service life you expect from the factory.
( 6 )
$205.99
—
$225.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$33.99
—
$151.99
Standard Motor Products EGR valve control solenoids are just what you need to replace your worn-out factory units. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 5 )
$35.99
—
$47.99
Don't take chances with an old, questionable, or failing EGR valve position sensor that can leave you stranded. Standard Motor Products replacement EGR valve position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 2 )
$25.99
Clearance
Dorman intake manifold runner control valves are designed to stay closed at lower rpm to improve low-speed and cold-engine performance. At higher rpm, the valves completely open to improve high-speed engine performance. Get your engine performing at its best again with one of these Dorman intake manifold runner control valves.
( 12 )
$83.95
—
$91.95
Dorman EGR valves effectively recirculate exhaust gas to be re-burned in the intake manifold where the engine can burn it again. This reduces emissions and ensures that your vehicle is performing at its maximum potential. When your EGR valve isn't working properly, it can result in reduced performance or increased fuel consumption. Dorman parts are direct-fit replacements to ensure a proper fit.
( 10 )
$62.99
Summit Bucks
ACDelco GM Genuine Parts EGR valves are emission control devices and GM recommended replacements for your vehicle's original part. The EGR (Exhaust Gas Recirculation) valve modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. These GM Genuine Parts EGR valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 18 )
$22.99
Motorcraft replacement exhaust gas recirculation EGR valves are produced and evaluated to exceptional standards to ensure enduring quality, maximum performance, and an exact, vehicle-specific fit. As an automotive aftermarket division under Ford Motors, Motorcraft manufactures genuine and OE-quality replacement parts for Ford, Lincoln, and Mercury vehicles.
( 1 )
$53.99
—
$255.99
Choose the Dorman solution for replacing your EGR tubes. As part of the Clean Air Act, exhaust gas recirculation systems are a must. When in proper working order, they reduce tailpipe emissions and fuel consumption. Dorman EGR tubes feature flex expansion joints, reducing stress related to fractures, and also include sheathing (where applicable) to protect components from heat damage. That means that these primary passageways to your EGR systems offer sufficient flow for better engine performance, power, and fuel economy. Dorman EGR tubes provide answers for efficient combustion. Order the model recommended for your vehicle and engine version.
( 34 )
$10.99
—
$74.95
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$52.99
—
$70.99
Keep your exhaust emissions--and your budget--down with Standard Motor EGR tubes. If your exhaust gas recirculation tube is cracked or leaking, your EGR valve will not function properly--and that's a problem. So, keep your exhaust gases recirculating properly and efficiently with quality-built Standard Motor EGR tubes.
( 2 )
$62.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series EGR valve control solenoids offer high-quality materials that withstand extreme temperatures, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
Not Yet Reviewed
$26.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
