Availability
Showing In Stock Items. Show All 27 Items.
BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job
( 3 )
$201.95
Aeromotive Phantom 340 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 700 horsepower on forced induction EFI setups and up to 850 horsepower on naturally aspirated EFI setups * Supports up to 860 horsepower on forced induction carbureted setups and up to 1,000 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 340 fuel pump (18688) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 41 )
$587.06
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 27 )
$315.95
—
$649.95
Weldon D2345-A electric fuel pumps offer flow rates to support 1,400 hp and higher. These high performance pumps provide precise and consistent fuel delivery. D2345-A pumps feature: * Self-priming * Pump elements are 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 7 lbs. * Fuel injected engines: 2,800 hp at 50 psi at 16 V (naturally aspirated) 2,400 hp at 80 psi at 16 V (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
Not Yet Reviewed
$1,236.70
Aeromotive Phantom fuel systems are an industry game-changer! Order one of these Phantom fuel pump wiring kits to get yours up and running! They include all the necessary hardware and connectors to complete the installation. Features and notes for Aeromotive Phantom fuel pump wiring kits: * 20 ft. overall length for full-size vehicles * 30 amp 12 VDC automotive relay * 30 amp 12 VDC circuit breaker * 10-gauge fuel pump power/ground wire * 16-gauge trigger wire * Cable ties * Self-tapping mounting screws * Required tools include electrical terminal crimping tool, 5/16 in. nut driver, and electric drill
( 31 )
$178.75
Weldon DB2025-A electric fuel pumps offer flow rates to support 880 to 1,400 hp. These high performance pumps provide precise and consistent fuel delivery. The DB2025-A pumps work with both carbureted and fuel-injected engines. Features and specs include: * Self-priming * Pump element is 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 5.5 lbs. * Fuel injected engines: 1,600 hp at 50 psi (naturally aspirated) 1,400 hp at 80 psi (boosted) * Carbureted engines: 1,800 hp at 7 psi (naturally aspirated) 1,700 hp at 30 psi (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
Not Yet Reviewed
$806.29
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 8 )
$799.95
—
$999.95
Aeromotive Phantom 200 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 200 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 200 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 450 horsepower on forced induction EFI setups and up to 600 horsepower on naturally aspirated EFI setups * Supports up to 600 horsepower on forced induction carbureted setups and up to 750 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 200 fuel pump (18689) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 27 )
$514.90
Weldon D2035-A electric fuel pumps offer flow rates to support 1,400 hp and higher. These high performance pumps provide precise and consistent fuel delivery. The D2035-A pumps work with both carbureted and fuel-injected engines. Features and specs include: * Self-priming * Pump elements are 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 5.5 lbs. * Fuel injected engines: 1,600 hp at 50 psi (naturally aspirated) 1,800 hp at 80 psi (boosted) * Carbureted engines: 2,000 hp at 7 psi (naturally aspirated) 1,800 hp at 30 psi (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
Not Yet Reviewed
$918.44
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$849.95
$399.95
—
$699.95
Top Street Performance aluminum fuel pump brackets are a simple tool to help when configuring your fuel system. The mounting brackets are CNC-machined from lightweight billet aluminum and utilize a straight-forward design to provide an easy installation. These fuel pump brackets are offered in diameters and finishes to help complete your setup. Order the TSP aluminum fuel pump bracket model that is designed to fit your application.
( 1 )
$14.82
Top Street Performance aluminum fuel pump and filter combo mounting brackets are a simple tool to help when configuring your fuel system. CNC-machined from lightweight billet aluminum, these brackets utilize a straight-forward design to provide an easy installation. These brackets are offered in diameters and finishes to help complete your fuel pump setup. Order the TSP aluminum fuel pump and filter bracket designed to fit your application.
Not Yet Reviewed
$22.22
Dorman fuel pump strainers are direct replacements for the originals. They feature a built-in wire mesh screen to keep your fuel pump clean and debris-free. Strainers are essential components for your vehicle's fuel delivery system. Filtering the fuel that passes through the fuel pump reduces the risk of damaging your vehicle's fuel system, as well as having an effect on how the engine runs. Dorman fuel pump strainers provide the fit and function necessary with no special tools required during installation.
( 3 )
$32.99
Dorman diesel hand primer fuel pumps are direct replacements for worn, seized, or leaking original equipment. Their design helps prevent fuel leakage and ensure proper fuel system bleeding. The pumps are available in multiple styles for fitment on nearly 200 truck applications from the late 1990s and up. They install quickly with standard tools.
Not Yet Reviewed
$25.99
—
$123.99
Top Street Performance electric fuel pump and filter kits will take care of your fuel delivery needs. The two-in-one electric fuel pump and filter kits come with a high-flow pump, efficient filter, and an easy to mount bracket. The high-flow pump provides a great fuel delivery solution for your EFI power plant, is housed in the "044" style, comes with all fittings and post hardware for simple installation and is compatible with EFI gasoline applications. TSP's inline fuel filter provides maximum flow, with almost no pressure drop, and can be used in fuel injected or carbureted engines with low or high horsepower. The included fuel pump and filter mounting bracket is a simple tool that's designed to help when configuring the fuel system and utilizes a straight-forward clamp design for easy installation. Additional product details: * Universal application * Electric fuel pump is housed in the "044" style and includes all fittings and post hardware for simple installation * Precision-machined from 6061 T-6 billet aluminum inline fuel filter offers simple, reliable filtration and versatility * Lightweight, CNC-machined billet aluminum two-in-one bracket utilizes a straight-forward clamp design for easy installation * Available with 10-, 40-, or 100-micron fuel filter
Not Yet Reviewed
$222.22
Weldon A2046 Series fuel pressure regulators will exceed your performance expectations. They work with all Weldon pump and regulator combinations, as well as pumps from other manufacturers. Features include: * "Tool-free" pressure control with single hand adjustability * Stainless steel poppet and Delrin® seat * Ideal for use in single, dual, and "split" carburetor applications * PTFE diaphragm * 1/8 in. NPT gauge port * 1/8 in. NPT manifold pressure reference port * Adjustable between 4 to 15 psi * -10 AN inlet with four -6 AN pressure ports * Billet aircraft aluminum with Mil-Spec anodizing * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
( 1 )
$251.36
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 181 )
$155.99
—
$213.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
