Availability
On Sale
FASS Fuel Systems banjo bolt removal kits allow you to replace fuel pump fittings on a variety of engine applications. These kits include various sizes and quantities of straight and 90 degree steel fittings, as well as fuel hose. Order the model recommended for your vehicle.
( 5 )
$51.30
$46.17
ICT Billet offers direct injection fuel pump lifter delete plugs for a variety of applications. When removing direct injection, the high-pressure fuel pump lifter must be removed—exposing an oil port in the lifter bore. These delete plugs will seal the lifter bore to prevent low oil pressure. They are compatible with all Gen V, LT Series engines. The kits include aerospace-grade billet aluminum plug, O-rings, mounting bracket, and bolt.
Not Yet Reviewed
$43.99
Lingenfelter regulator plugs are designed to block off the internal fuel pressure regulator in the driver's side fuel tank when converting to an external fuel pressure regulator. These fittings are required to install an external fuel pressure regulator when your fuel system will run at reduced fuel pressures below 54 psi. They're also needed when your fuel system will be running the stock 58 psi fuel pressure but you're converting to a vacuum referenced regulator. The vacuum referenced system will drop below 54 psi of fuel pressure at idle, cruising, or under deceleration. When the fuel pressure drops below 54 psi, the transfer pump from the passenger side tank will no longer correctly function and will fail to transfer fuel. This situation will reduce the vehicle range and fuel system capacity. Since this transferred fuel also helps keep the canister full in the driver side tank, it may also cause the vehicle to lose fuel pressure under high power conditions. Order the block-off plug recommended for your vehicle. Additional notes: * Lingenfelter fuel pressure regulator block-off plugs are precision CNC-machined from aluminum and then anodized blue for added durability * General Motors switched the C5 Corvette fuel systems over to the C6 Corvette fuel system design halfway through the 2003 model year. Corvettes with the last 6 digits of the VIN being 114930 or higher were produced November 25, 2002 and later and have the new C6 style fuel system * These regulator block-offs should be used in conjunction with the Lingenfelter passenger side fuel tank block-off fitting
Not Yet Reviewed
$58.85
Radium Engineering fuel pump adapter kits are available to convert the hose-barbed outlet of many fuel pumps to -6AN male or to integrate a high-flow check valve on the outlet of many fuel pumps. Radium kits feature two billet aluminum adapter halves secured together with a stainless steel retainer and bolts that clamp tightly around the pump outlet, plus FKM O-ring(s) for a leak-free connection and E85 compatibility.
Not Yet Reviewed
$37.95
On Sale
Aeromotive 12-Series mechanical pump outlet port adapter fittings are designed for operational use on the 12-Series fuel pump outlet (pressure) port. These black anodized aluminum bolt-on kits provide ORB -08 to AN -08, ORB -12 to AN -12, or ORB -12 to AN -10 outlet port adapter connections, depending on application. Aeromotive 12-Series mechanical pump outlet port adapter kits get your high-flow 12-Series fuel pump properly connected to the rest of your fuel line. Order the kit designed to fit your application. Features, items, and specs may include: * High-flow capacity * O-rings and stainless steel fasteners * Suitable for hex or belt-driven pumps * Supports high-pressure fuel line and hose ends * ORB -08 to AN -08 versions support mechanical injection applications requiring AN -08 supply line to barrel valve
Not Yet Reviewed
$50.90
$45.81
On Sale
Aeromotive 12-Series mechanical pump inlet port adapter fittings are designed for operational use on the 12-Series fuel pump inlet (suction) port. These black anodized aluminum bolt-on kits provide either AN -16 male flare, or 1.250 in. barb inlet port adapter connections, depending on application. Aeromotive 12-Series mechanical pump inlet port adapter kits get your high-flow 12-Series fuel pump properly connected to the rest of your fuel line. Order the kit designed to fit your application. Features, items, and specs may include: * High-flow capacity * O-rings and stainless steel fasteners * Suitable for hex or belt-driven pumps * Supports 1 1/4 in. hose or hard tubing inlet (1.250 in. barb inlet port adapter only) * Requires bib hose and clamps with tubing (1.250 in. barb inlet port adapter only)
Not Yet Reviewed
$50.90
$45.81
Install your Fleece Performance fuel distribution block with the correct hose and fittings. These components are the necessary links between your fuel pump and the distribution block. Fleece Performance fuel distribution block hose and fitting kits come complete with all of the high-quality AN fittings and push-lock lines needed to cleanly plumb your dual CP3 fuel system.
Not Yet Reviewed
$160.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$349.95
$140.95
—
$331.95
Carter universal rotary vane electric fuel pumps operate using leaded and unleaded gasoline, gasohol, and fuel boosters. They have an internal pressure-regulating valve, and feature free-flow fuel delivery. These pumps have no points to burn out, and no shaft seals to leak or deteriorate.
( 592 )
$105.99
Edelbrock universal EFI sump fuel systems are designed to provide the necessary high fuel pressure required for EFI applications in vehicles equipped with an existing low-pressure carbureted fuel system. They're complete self-contained systems that can be easily installed under the hood. The unique design of these systems allows them to deliver constant fuel pressure with no fuel return line or external fuel pressure regulator—and they're compatible with the existing factory fuel tank and pump. These units are ideal for use with various aftermarket EFI systems and with many popular engine swap applications that require constant 35 to 90 psi fuel pressure. The systems feature a new compact design that's adjustable from 35 to 90 psi and include a vacuum reference port. These 67 gph pumps are a great solution when used with an Edelbrock Pro-Flo 4 or 4+, or other aftermarket EFI system. Edelbrock universal EFI sump fuel systems are also available in a kit. Each complete kit includes a wiring harness, universal mounting brackets, hose, fittings, and all of the necessary hardware for installation.
( 33 )
$441.95
—
$541.95
Summit Bucks
Top Street Performance LS EFI 85 GPH fuel pump and filter regulator kits are a great fuel delivery solution for your LS engine swap. With a "044" style pump and LS Corvette-style fuel filter pressure regulator, these assemblies are easy to install and fit to your vehicle. The pump has a free flow rate of 85 gph, and the regulator has a maximum pressure of 58 psi. Each kit includes all the necessary fittings and 25 ft. hose. (In order for regulator to operate at 58 psi, it is recommended to mount the regulator as close to fuel tank as possible.) Product specs: * Universal; intended for gasoline EFI applications * PUMP FREE FLOW RATE: 320 lph (85 gph) * PUMP MAXIMUM PRESSURE: 90 psi * PUMP HOUSING MATERIAL: Aluminum * PUMP INLET ATTACHMENT: Female * PUMP INLET SIZE: -10 AN * PUMP INLET QUANTITY : One * PUMP OUTLET ATTACHMENT: Female * PUMP OUTLET SIZE: -8 AN * PUMP OUTLET QUANTITY: One * FILTER TYPE: Inline * INLET SIZE: -10 AN O-ring * INLET ATTACHMENT: Female * OUTLET SIZE: -10 AN O-ring * OUTLET ATTACHMENT: Female * FILTER STYLE: Inline * INLET QUANTITY: One * INLET ATTACHMENT: Male * OUTLET SIZE: -8 AN * OUTLET QUANTITY: Two * OUTLET ATTACHMENT: Male * OUTLET SIZE: -8 AN * FILTER ELEMENT: Included * SMALLEST PARTICLE FILTERED: 5 Microns * ELEMENT MATERIAL: Paper * HOUSING MATERIAL: Steel * HOUSING FINISH: Natural * OVERALL LENGTH: 5.660 in. * OUTSIDE DIAMETER: 2.175 in. * MOUNTING BRACKET: Included * FITTINGS: Included * CLAMPS: Not Included * REGULATOR STYLE: Return
( 4 )
$320.98
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$293.99
The single fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using one fuel pump and one tank. The kits are designed for LS engines that have a single fuel inlet fitting. Kit includes: * Fuel filter/fuel regulators * In-Line check valve * (2) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (6) Russel straight -6AN straight Twist-Lok fittings * Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$199.99
On Sale
Holley billet EFI return-style fuel pressure regulators are space saving options when mounting on the end of the fuel rail or near the throttle body. They are preset at 59.5 psi, and the cap can be removed and re-oriented to suit the desired fuel routing. These Holley EFI fuel pressure regulators feature 6061 T-6 billet aluminum construction, and are machined for all SAE6 ports with three -6 AN fittings included, plus an extra plug to replace one fitting when installed post throttle body/fuel rail. They are compatible with Holley Sniper or Sniper Stealth among other applications, and available with either an all-black or a black/clear anodized finish.
( 6 )
$249.95
$212.35
—
$249.95
Walbro fuel pump mounts are more secure than typical factory-supplied band clamps for holding your external electric fuel pump to the frame. These simple mounts have a foam sleeve included to help reduce vibration, and are compatible with most any vehicle.
( 19 )
$20.99
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo, and supercharged gasoline engines. They'll allow you to adjust fuel pressure from 4 1/2 to 9 psi, and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits include fittings, a mounting plate, fuel line, and single or dual regulators.
( 2 )
$224.95
Warm up fast with Shifnoid engine lean out kits. Connected to your intake manifold or carburetor spacer, these kits present an ideal solution for rapid warmup--especially for your alcohol engines. Shifnoid kits include push-to-connect fittings, an air line, and an industrial-grade valve.
( 1 )
$82.99
—
$97.99
FiTech Go Fuel regulators allow you to set the fuel pressure precisely where your EFI system and engine require. The regulators are able to handle high-flow fuel pumps, can be adjusted from 30 to 70 psi, and can support up to 1,000 hp on gas engines. Crafted from billet aluminum, FiTech regulators feature -6 ORB ports, a vacuum/boost port, and they will accept a pressure gauge. They are offering two models, a compact unit with a single outlet and a larger, dual outlet version.
( 2 )
$127.00
—
$171.00
On Sale
Put a sock in your fuel tank! FUELAB in-tank straining filters are compatible with gasoline, diesel, methanol, and ethanol fuels. The "sock" design of the 75 micron stainless steel filters includes a -10 AN fitting adapter—and is rated up to 1800 hp. These universal filters are cleanable and able to support a flow of 200 gph. Make sure contaminants are trapped before they can damage your engine. FUELAB has the expertise and the products to protect your system.
( 4 )
$42.00
—
$77.00
$37.80
—
$69.30
Radium Engineering distribution blocks ensure the most direct path for unrestricted flow. CNC-machined from 6061 aluminum, they feature three AN ORB female ports on one side and one larger AN ORB female port on the opposing side. The blocks include fittings, are anodized for corrosion resistance, and can be used in all fluids including alcohol (ethanol/methanol), gasoline, coolant, water, air, and oil.
( 1 )
$66.45
—
$85.45
These FAST in-tank electric EFI fuel pumps allow you to upgrade your in-tank fuel pump to some serious fuel flow. They include both -6 AN and barbed hose fittings, terminals, wiring, hoses and clamps. They flow more lph to help your fuel system provide more fuel for the system.
( 3 )
$199.95
—
$956.95
Pacific Performance Engineering lift pump fuel line install kits make installation of your PPE fuel lift pump a snap. These kits provide pre-cut hoses, brass fittings, and clamps that you'll need to easily complete installation. Don't get sidetracked searching for correct parts to finish the job; simply order the kit recommended for your vehicle application.
Not Yet Reviewed
$35.99
On Sale
Aeromotive VaporWorx corner pickup kits provide the ultimate in low fuel level performance for Gen5 Camaro, CTS-V2, and C7 fuel modules. They will also work with other fuel modules that have a suction port/in-tank crossover line connection usually located on the lower reservoir. Kits include: * Two genuine Walbro vented pickups * In-tank rated flexi-hoses * Stainless steel full-contact clamps * 45-degree 3/8 in. x 5/16 in. quick connector fitting * Y, T, and in-line connector fittings * Three 15 in. hoses * One 8 in. hose Note: Suction pump connection needed. Not for use on standalone pumps.
Not Yet Reviewed
$190.95
$171.86
Carter inline electric fuel pumps are quality replacements to deliver fuel at the precise pressure and flow rate your vehicle demands. With a low amp draw, high free-flow, and consistent fuel pressure, these pumps will keep your engine well-fed. Universal and vehicle-specific models are available.
( 80 )
$51.99
—
$116.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
