Fuel Pumps, Regulators & Pump Parts

Aeromotive BoostWorx Returnless ZL1 Pulse Width Modulation Kits

Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor

5.0 out of 5 stars ( 1 )

$359.50

—

$577.15

Aeromotive BoostWorx Returnless Dual Fuel Pump Pulse Width Modulation Controllers

Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump

Not Yet Reviewed

$673.15

Aeromotive BoostWorx DualX ZL1 Universal Fuel Module Controllers

Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand

Not Yet Reviewed

$652.26

Aeromotive BoostWorx Returnless Triple-Pump Pulse Width Modulation Controllers

Aeromotive VaporWorx BoostWorx returnless PWM controllers for triple fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM triple-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Must be used in manifold referenced fuel pressure mode * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pumps

Not Yet Reviewed

$707.16

On Sale

MSD Electric Fuel Pump Boosters

MSD electric fuel pump boosters will supply your electric fuel pump with increased voltage in relation to the manifold boost pressure. The amount of voltage is adjustable with a potentiometer, from a range of an additional 1.5 V to a maximum output of 22 V, over a range of 5–30 psi.

5.0 out of 5 stars ( 1 )

$716.95

$644.95

Aeromotive VaporWorx Ally PWM Fuel Pump Controller Kits

Aeromotive VaporWorx Ally PWM fuel pump controller kits allow a second pump to be added to an OEM fuel system control module without causing overloading of the stock FSCM. They are compatible for use with positive trigger OEM fuel system control modules when using an aftermarket standalone fuel pump. For clarity, there are many names for the modern OEM fuel pump driver/fuel computer, but all basically do the same thing; communicate with the ECM to drive the fuel pumps at the speed needed to provide the requested fuel pressure. Most aftermarket ECMs do not have this capability and unfortunately, many OEM fuel system control modules (FSCM) can handle one high-power pump, but not two or more. So, in the search for more power, and to keep the FSCM working, it needs help. That's where VaporWorx Ally PWM fuel pump controller kits come in. These Ally kits allow positive pulse FSCMs to control the primary pump, while the VaporWorx Ally Auto-On controller "piggybacks" and takes care of the other pump(s). The controllers do not turn on the other pumps until approximately 3 to 4psi of boost by using the engine MAP sensor or a VaporWorx standalone MAP sensor as the turn-on trigger. The Ally solution provides sufficient power for all fuel pumps while maintaining the FSCM full CAN feedback and diagnostics, and all pumps will effectively be under the control of the FSCM. Kits are available for naturally aspirated and supercharged applications. Select the kit best suited to your setup. Features: * Everything needed electrically to drive additional fuel pumps -- No hard-to-get connectors, multiple fuses, Hobb's switches, etc. * A 2/3 reduction in power to the fuel pump during idle and cruise vs. traditional systems means long OEM pump life expectancy * 50-amp minimum continuous power rating in a compact controller package * Progressive 2/3 pump ramping strategy lowers the load on the FSCM to reduce MIL codes * Soft-start feature to reduce initial pump-on pressure spikes * Can use either the engine MAP sensor or a VaporWorx standalone MAP sensor * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * Cross-linked polyethylene wiring * UL94 rated components used throughout * Allows all the OEM ECM priming and safety systems to remain functional * Can be used with one or two extra/auxiliary pumps * 10 to 22 V operating capacity

Not Yet Reviewed

$597.35

Aeromotive VaporWorx ReturnX Return-Type Triple Pump Pulse Width Modulation Controllers

Aeromotive VaporWorx ReturnX return-type triple-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for three high-powered brushed pumps. Offering primary and secondary PWM controller output, the primary provides sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller feeds the third pump Benefits: * Everything needed electrically to drive three brushed fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications

Not Yet Reviewed

$707.16

Aeromotive True Variable Speed Controllers

Upgrade your existing Aeromotive brushless fuel pump with the new True Variable Speed Controller (TVS), which offers the advantage of pump speed control via a 0-5 V analog DC input signal. The TVS controller capitalizes on existing brushless technology by reducing fuel flow during low-demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. These units are quality replacements or improvements to your fuel pump system.

Not Yet Reviewed

$416.17

MagnaFuel Carbureted Racing Fuel Pressure Control Units

Unlike many fuel pressure regulators that allow pressure to drop during sudden changes in fuel demand, MagnaFuel carbureted racing fuel pressure control units supply high performance engines with a steady diet of fuel. They feature exclusive pressure control units that control pressure drop during initial launch, gear change, or nitrous activation. They're available in 2 or 4-port configurations with 1/8 in. NPT pressure ports.

4.64 out of 5 stars ( 45 )

$139.99

—

$223.99

Aeromotive VaporWorx ReturnX Return-Type 3 to 4 Pump Pulse Width Modulation Controllers

Aeromotive VaporWorx ReturnX return-type 3 to 4-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for up to four high-powered brushed pumps. ReturnX has primary and secondary PWM controller output. Under normal idle/cruise driving, the #1 and #2 pumps are on the primary side and running fast enough to provide sufficient fuel pressure. The #3 and #4 pumps are attached to the PWM secondary output, but follow at a much lower duty cycle than the primary side. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller the third and fourth. Benefits: * Everything needed electrically to drive three or four fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * #3/#4 pumps ramp in automatically, no adjustments needed * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications

5.0 out of 5 stars ( 1 )

$845.54

Aeromotive VaporWorx ReturnX Return-Type Pulse Width Modulation Controllers

Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition

5.0 out of 5 stars ( 1 )

$520.50

—

$652.26

Aeromotive BoostWorx Returnless Ford GT500 Pulse Width Modulation Kits

Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT500 have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1314 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure. BoostWorx GT500 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor

Not Yet Reviewed

$570.51

MagnaFuel EFI Fuel Pressure Control Units

MagnaFuel EFI fuel pressure control units feature a unique guided-metering valve assembly to provide a more accurate metering of fuel flow and help reduce the pressure drop that can occur at high or sudden changes in fuel demand. The pressure control units are designed to work with the EFI 600 pump and are available in two sizes--large for applications of up to 2,000+ hp and standard for applications of up to 700 hp. Each of these units has a 1/8 in. NPT pressure port for a gauge, a filtered vent fitting or optional boost reference fitting, and is compatible with racing gasoline and alcohol. The units feature a CNC-machined, aircraft-quality aluminum body and are hand-assembled and flow-tested for maximum performance.

4.85 out of 5 stars ( 26 )

$144.99

—

$274.99

Mopar Replacement Fuel Pump Control Modules

Mopar Replacement fuel pump control modules are genuine OE replacements designed to monitor your fuel pump. These modules are engineered from high-quality materials to provide you with reliable, long-term service—and the proper fit, form, and function for your vehicle. When it comes to your Mopar, don't leave yourself second-guessing; order the fuel pump control module by Mopar Replacement designed to fit your application.

Not Yet Reviewed

$124.99

Aeromotive VaporWorx Standalone KPM1500 Fuel Pump/Returnless Pulse Width Modulation Control Systems

Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)

Not Yet Reviewed

$3,019.82

Aeromotive Billet Electric Fuel Pump Controllers

Whether you're cruising or running wide-open, Aeromotive billet electric fuel pump controllers are able to sense engine rpms and deliver the correct voltage to the fuel pump(s). An adjustable knob lets you calibrate the desired rpm level, while an LED indicator confirms ignition hookup, verifies the energizing of the manual override circuit, and confirms the circuit is providing full voltage to the pump(s). The fuel pump controller housings are constructed from 6061-T651 billet aluminum and have an anodized finish for great looks and protection. Their low operating temperature allows mounting in any location, and they come complete with everything needed for installation.

3.67 out of 5 stars ( 18 )

$446.45

DeatschWerks DW810 Brushless In-Tank Electric Fuel Pumps

DeatschWerks DW810 brushless in-tank electric fuel pumps provide unprecedented high fuel flow in a reliable, quiet, and compact package. The units optimized impeller design achieves peak efficiency at target flow rates while careful engineering of internal fluid flow eliminates restrictions. The DW810 in-tank electric fuel pumps brushless motor technology reduces friction and heat, vastly improving durability, especially when using aggressive fuels such as ethanol and methanol. DeatschWerks has engineered their fuel pumps to maximize flow at higher pressures. By designing the armature for torque bias, delaying pressure relief activation, and maximizing impeller efficiency, DW has created a line of pumps with an extremely flat flow curve. Higher flow at higher pressure delivers the fuel your engine demands. All DW pump designs go through 1,000 hours of endurance bench testing in a number of fuels to find and eliminate common modes of failures. Upon success, the pump design is in-car tested for several months in real-world conditions before production is approved. Each fuel pump is flow tested at pressure to make doubly sure that it meets DW's high standards of performance before it is labeled and packaged. Product features: * One pump—two times the flow! * 5/16 in., 3/8 in., -6AN and -8AN anodized fittings included * Compact size is optimized for in-tank use * Universal bulkhead harness and fitment kit included with select pump models as noted * Compatible with all fuels including Methanol and E100 * No brushes, plus no commutator equals ultimate durability

3.0 out of 5 stars ( 1 )

$599.00

Aeromotive BoostWorx CTS-V LSA Pulse Width Modulation Fuel Module Controllers

Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition

Not Yet Reviewed

$499.57

Aeromotive VaporWorx Ally DualX Positive or Negative Driver Pulse Width Modulation Controller Kits

Aeromotive VaporWorx Ally DualX PWM controller kits are compatible with any OEM fuel system control module when using OEM fuel modules with either an OEM Fuel System Control Module (FSCM) or aftermarket ECM pulse driver. They allow the OEM FSCM to control the primary pump while the Ally DualX controller "piggybacks" and takes care of the second. The controller takes its operating commands from the FSCM pulsed wire--no user programming, system changes, or adjustments are needed. In this way, there is sufficient power for all fuel pump modules while maintaining full FSCM CAN feedback and diagnostics. Ally DualX kits perform the following basic functions: * Whenever the primary pump is running, the Ally DualX controller will also be running. This is typically used with OEM fuel pump modules. It is important to have the second fuel pump module running all the time or else it may run dry under some conditions. * Whenever the ECM is providing either a positive or negative pulse, the Ally DualX controller will also be running the primary fuel pump(s). This is typically used with aftermarket ECMs + naked pumps in a mechanically pressure regulated fuel system. Aeromotive VaporWorx Ally DualX PWM controller kits feature: * Everything needed electrically to drive the fuel pump module * Unmatched low fuel level capability when using an OEM fuel module as the second pump * A 1/2 to 2/3 reduction in power to the fuel pump during idle/cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset that will operate indefinitely without damage * Short circuit protection with automatic reset that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * 10 to 22 V operating capacity * Can be used with voltage boosters

Not Yet Reviewed

$520.50

Aeromotive BoostWorx Returnless CTS-V Pulse Width Modulation Kits

Aeromotive VaporWorx BoostWorx returnless PWM kits for CTS-V fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with GM CTS-V2 and compatible fuel pump modules, this system will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating just like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx CTS-V controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor

Not Yet Reviewed

$597.35

Aeromotive BoostWorx ZL1 LSA Pulse Width Modulation Fuel Module Controllers

Aeromotive VaporWorx BoostWorx PWM controllers for ZL1 LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the Gen5/6 Camaro ZL1 fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM ZL1 LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 650 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition

Not Yet Reviewed

$520.50

Aeromotive BoostWorx Returnless Ford GT Pulse Width Modulation Kits

Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1215 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure, and they can be used in constant pressure mode by removing the vacuum line or MAP sensor wiring, and the controller will provide a constant pressure. BoostWorx GT controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor

Not Yet Reviewed

$561.42

FUELAB Externally Mounted Electronic DC Brushless Fuel Pump Controllers

FUELAB electronic fuel pump controllers are enclosed in billet aluminum cases and are specifically designed to operate DC brushless fuel pumps. They're available in various speed control options and can operate up to 20 amps and 16 volts.

Not Yet Reviewed

$315.00

Tanks Inc. Brushless Fuel Pumps

Tanks Inc. in-tank brushless fuel pumps make use of cutting-edge technology for optimal efficiency and dependability. As a result, every type of engine can now use a next-generation pump with accurate fuel pressure management, lower current consumption, lower heat production, and reduced noise. The brushless fuel pumps include controller kit. Details: * TI Automotive/Walbro brushless screw fuel pump * PWM (pulse-width modulation) input command * Supports 1000+ hp, 550 LPH * Gas or Flex Fuel * Controller kit: -- 3-step controller, pump, wiring harness, filter and insulating sleeve

Not Yet Reviewed

$717.99