Availability
Showing In Stock Items. Show All 43 Items.
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$649.95
$311.95
—
$828.95
Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator
Not Yet Reviewed
$1,549.95
—
$3,099.95
Updating your racing fuel system to EFI is so simple! Holley Sniper presents their latest diecast fuel cell EFI pump modules designed to drop in as a direct replacement for your existing 6- or 12-bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an -6AN inlet port, a -6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep. The EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs. These fuel cell EFI fuel pump module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line. Features include: * Easy way to update your fuel cell to EFI * Designed to drop right into your existing 6-bolt flange fuel cell * Diecast aluminum top flange housing includes a -6AN inlet and -6AN outlet port and a fuel filler cap * Pump depth is fully adjustable for fitment in the most popular cell sizes 7.5 in. to 11 in. * EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs
( 9 )
$424.95
—
$475.95
On Sale
Aeromotive electric in-tank fuel pumps are replacement elements for your 6.5, 15, and 20 gallon fuel cell kits. These quality pumps are direct replacements for the original pieces in your Aeromotive fuel system. They're available with or without a filter. Goin' in-tank is great! Aeromotive replacement electric in-tank fuel pumps keep the fuel pumpin'.
Not Yet Reviewed
$624.90
—
$1,327.30
$562.41
—
$1,194.57
On Sale
Aeromotive A1000 brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these TVS (True Variable Speed) models offer the advantage of pump speed control via their 0-5 V analog DC input signal. They are designed for cool and quiet operation with various models, including those for fuel cells and shallow fuel tanks. Order the Aeromotive A1000 brushless variable speed in-tank fuel pumps best suited for your application. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Most models run 90 psi continuous and some can handle 150 psi peak pressure (base plus boost) * Some models include two stainless steel T-bolt clamps (12703) for mounting * Shallow tank models are for fuel tanks as shallow as 6.7 in. * Shallow tank model with 90-degree outlet only 1 5/8 in. above mounting surface
Not Yet Reviewed
$1,384.05
—
$1,467.35
$1,245.64
—
$1,320.62
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
On Sale
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$2,164.40
—
$2,229.15
$1,947.96
—
$2,006.24
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$777.95
$399.95
—
$899.95
Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$1,599.95
—
$3,199.95
On Sale
Aeromotive brushless Stealth fuel pumps provide the Pro-Series fuel pump performance the world has come to trust and depend on—now available with the latest spur-gear pumping mechanism and brushless-motor technology. These brushless spur-gear pumps are able to move more fuel and sustain higher pressures without failure. They provide a direct-fit on all Aeromotive Stealth 6, 15, and 20-gallon fuel cell tanks; and the pumps are submersible for custom, in-tank placement in 10 in. deep fuel tanks or fuel cells. For use in EFI or carburetor applications with correct regulator.
Not Yet Reviewed
$1,818.00
—
$2,040.80
$1,636.20
—
$1,836.72
On Sale
Aeromotive VaporWorx ReturnX return-type 3 to 4-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for up to four high-powered brushed pumps. ReturnX has primary and secondary PWM controller output. Under normal idle/cruise driving, the #1 and #2 pumps are on the primary side and running fast enough to provide sufficient fuel pressure. The #3 and #4 pumps are attached to the PWM secondary output, but follow at a much lower duty cycle than the primary side. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller the third and fourth. Benefits: * Everything needed electrically to drive three or four fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * #3/#4 pumps ramp in automatically, no adjustments needed * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
( 1 )
$816.95
$735.26
On Sale
Aeromotive VaporWorx ReturnX return-type triple-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for three high-powered brushed pumps. Offering primary and secondary PWM controller output, the primary provides sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller feeds the third pump Benefits: * Everything needed electrically to drive three brushed fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
Not Yet Reviewed
$683.25
$614.92
Holley Retrofit 525 LPH replacement fuel pumps are ideal replacements for Retro-fit and fuel cell pump models supporting 1200 EFI or 1450 carb hp (at 60 psi at 13.5 V/16.9-amp draw; individual systems will vary based on fuel system design, regulator type, fuel cell location, etc.). These fuel pump service parts come with a fuel supply tube, clamp, foam pump sleeve and sealing ring to help make your installation quick and easy. Once installed, hook up the fuel lines and power source/ground and you're off and running!
Not Yet Reviewed
$299.95
Rhodes Race Cars fuel pump modules will convert your fuel setup to fuel injection or switch to an internal pump—and they do it with style. These pump modules from RRC are easy to install; simply unbolt your cap, install the module, hook up your power and ground wire, plumb your fuel system, and you're ready to go. There's no need for any modifications to your fuel cell. Rhodes Race Cars fuel pump modules are available in different LPH with attractive black, red, or blue caps—and will include all necessary hardware and full instructions. Choose either single or dual-style module with or without pump.
( 7 )
$274.95
—
$599.95
Holley VR1 Series fuel pumps allow you to build your own fuel system tailored to your combination. Featuring brushless pump technology and a twin-screw rotor design, the VR1 fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. The pumps include a 2-step controller for pump speed control and can be ran in one of two different speeds: low speed control for low fuel consumption or full speed for high fuel consumption requirements. Order the Holley VR1 Series brushless fuel pump with controller best suited for your application and build your own winning setup! Product features: * Designed to work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only—must drain and flush after each race event) * Can maintain up to 335 gph flow at 13.8 V * Capable of 130 psi while providing significant flow for forced induction applications where belt driven pumps are normally used * Unlike other pumps, the VR Series are built for continuous duty if needed * Quality construction for durability and good looks * Can be fully submerged in fuel cell or chassis mounted * Maximum amp draw of the VR1 is 19 amps
Not Yet Reviewed
$949.95
—
$1,249.95
On Sale
Aeromotive A1000 Stealth in-tank fuel pump assemblies feature a design with custom tank builders and fabricators in mind, providing multiple mounting options to fit in almost any fuel cell or tank. Order the Aeromotive A1000 Stealth in-tank fuel pump assemblies best suited to deliver cool, quiet operation for your custom ride!
Not Yet Reviewed
$1,082.70
—
$1,439.20
$974.43
—
$1,295.28
On Sale
FUELAB flange mount variable speed fuel pumps offers ease of use with fuel cells or fabricated reservoirs. These SAE 10-bolt H/E Series brushless screw pumps are able to support 1,200 hp at 60 psi, while consuming less than 10 amps of current, making them some of the most efficient single pump offerings available anywhere. They are great for boosted applications, as well as with 100 psi pressure capability, while still exceeding 400 lph and only 13 amps of current draw. Features: * Twin screw rotor pumping mechanism * Lightweight super-efficient DC brushless motor minimizes current draw * 12 V vehicle electrical system compatibility * Integrated controller with PWM speed control * Compatible with gasoline, diesel, methanol, and ethanol * Rated to flow 250, 350, or 500 lph at 45 psi, 125 psi max * Compact, lightweight design is less than 2.5 lbs. * Overall length 8 in. and pump diameter of 2 in.
Not Yet Reviewed
$1,199.00
—
$1,349.00
$1,079.10
—
$1,214.10
On Sale
FUELAB 495 Series low-pressure, low current draw in-tank fuel pumps are easily adaptable to fit any fuel tank or fuel cell. Gasoline and ethanol compatible, they are perfectly suited for transferring fuel out of the saddle tank or feeding an external fuel surge tank or collector. Install multiple pumps to scavenge fuel from various sections of the tank to feed a main collector. Available in three different outlet styles including nipple, -6AN, and SAE connections. Simple ring terminal style power connections, lightweight, and includes a straining filter to make these pumps not only versatile but also easy to install.
( 1 )
$90.00
$81.00
On Sale
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,539.50
—
$1,690.15
$1,385.55
—
$1,521.14
On Sale
Aeromotive A1000 brushless Stealth 2.0 gpm fuel pumps feature the latest brushless-motor technology for light weight, cooler fuel, and enhanced reliability. Each pump utilizes Aeromotive's bedrock solid roller vane design, which primes easily and reduces friction. A1000 Stealth pumps are designed as a direct drop-in replacement for any of the Stealth fuel cells, including COPO, Cobra Jet, or Drag Pak racecars. They're submersible for custom, in-tank placement, and are a great option when building a 10 in. deep custom fuel cell. These fuel pumps are for use in EFI or carburetor applications with correct regulator.
Not Yet Reviewed
$1,249.30
$1,124.37
On Sale
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$2,058.30
$1,677.24
—
$1,852.47
On Sale
FUELAB continues to lead the way in fuel pump innovation. FUELAB H/E Series fuel pumps are brushless, twin-screw pumps that represent a giant leap in efficiency and reliability. These pumps use a lightweight, DC brushless motor to reduce current draw. Combined with a twin-screw rotor pumping mechanism, they offer superior priming capabilities and improved resistance to cavitation. Available with flow ratings of 250 to 500 lph (@ 13.5 V, they are simply the best pumps on the market today. They feature billet aluminum construction with an integrated controller. Features include: * 3-phase DC brushless motor with neodymium magnets * Integrated electronics with no speed control * Billet aluminum, stainless steel construction with flourosilicone seals * Screw-style pumping mechanism * Wet motor design, without dynamic shaft seals * Port O-rings, mating electrical connector, instructions, and performance certification included * 8 to16 V operating range * Use only 12 V (6-cell lead acid battery) vehicle systems with or without charging system * All models require bypass regulator or relief valve to avoid over-pressure operating condition * Integrated 2-pin Delphi Weatherpack connector (external models only) * Integrated cushioned billet bracket system (external models only) Fuel compatibility includes: * Gasoline (pump and race) * Diesel * Methanol * Ethanol (including E85)
Not Yet Reviewed
$844.00
$759.60
On Sale
FUELAB 2800 Series SAE flange twin screw in-tank brushless fuel pumps are rated up to 2,800 hp—best in power and efficiency. The pumps are designed to be used with 595 Series fuel pressure regulators with .328 in. orifice or larger. These aftermarket upgrades offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 1,100 lph at 45 psi; speed controllable * 2,800 hp power support * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Electronic features: * 12 to 16 V vehicle electrical system compatibility * Variable duty motor speed --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-Sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Construction features: * Compact, lightweight design, less than 2.5 lbs. Overall length 8 in., pump diameter 2 in. * Billet aluminum construction with anodize per MIL-A-8625 Type II * Flange mounted SAE 10-bolt pattern for easy use with fuel cells of fabricated reservoirs * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM): * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,549.00
$1,394.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
