Fuel Pumps, Regulators & Pump Parts

Dorman Fuel Pump Driver Relocation Kits

Dorman fuel pump driver relocation kits are designed to improve your injection pump's reliability and longevity. One of the most common failures with the DS4 pump on certain diesel engines is the pump-mounted driver, which is located on the side of the pump. These relocation kits are simple modifications which move the PMD away from the area of potential heat buildup.

2.33 out of 5 stars ( 3 )

$119.95

Aeromotive 7.0 GPM Brushless Variable Speed Gear Pumps

Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction

5.0 out of 5 stars ( 1 )

$1,834.30

—

$2,442.40

Aeromotive 10.0 GPM Brushless Variable Speed Gear Pumps

Aeromotive 10.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum FWHP by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 6,900 fwhp on gas--naturally aspirated -- Up to 4,900 fwhp on gas--forced air induction -- Up to 4,830 fwhp on E85--naturally aspirated -- Up to 3,430 fwhp on E85--forced air induction -- Up to 2,415 fwhp on methanol--naturally aspirated -- Up to 1,715 fwhp on methanol--forced air induction * Carbureted -- Up to 7,600 fwhp on gas--naturally aspirated -- Up to 5,500 fwhp on gas--forced air induction -- Up to 5,300 fwhp on E85--naturally aspirated -- Up to 3,850 fwhp on E85--forced air induction -- Up to 2,650 fwhp on methanol--naturally aspirated -- Up to 1,925 fwhp on methanol--forced air induction

Not Yet Reviewed

$2,621.15

—

$2,688.55

Aeromotive A1000 Brushless In-Line Fuel Pumps

Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 90 psi with Signature models), featuring a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Includes two stainless steel T-bolt clamps (12703) for mounting * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 HP

4.0 out of 5 stars ( 1 )

$714.99

—

$826.50

Aeromotive Eliminator Brushless Fuel Pumps

Aeromotive Eliminator brushless fuel pumps are built for up to 65 psi of sustained pressure, featuring their bedrock solid, dual chamber roller vane design that primes easily, reduces friction, and improves efficiency. Brushless motors produce more torque capacity and efficiency, while delivering lower noise and higher reliability. The Eliminators provide 25 percent more flow at pressure than their A1000 models. Get the performance you expect and want with an Aeromotive Eliminator brushless fuel pump. Features also include: * Lighter than the traditional Eliminator pump * Reduced current draw at higher EFI pressures * Extended service life in methanol and ethanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Fully submersible for custom, in-tank placement * Perfect for "blow-through" carbureted engines up to 1,700 FWHP

Not Yet Reviewed

$1,097.31

—

$1,662.05

Aeromotive A1000 Brushless Stealth 2.0 GPM Fuel Pumps

Aeromotive A1000 brushless Stealth 2.0 gpm fuel pumps feature the latest brushless-motor technology for light weight, cooler fuel, and enhanced reliability. Each pump utilizes Aeromotive's bedrock solid roller vane design, which primes easily and reduces friction. A1000 Stealth pumps are designed as a direct drop-in replacement for any of the Stealth fuel cells, including COPO, Cobra Jet, or Drag Pak racecars. They're submersible for custom, in-tank placement, and are a great option when building a 10 in. deep custom fuel cell. These fuel pumps are for use in EFI or carburetor applications with correct regulator.

Not Yet Reviewed

$1,249.30

Aeromotive Phantom 300 Universal Diesel Fuel Pumps

Aeromotive Phantom 300 universal diesel fuel pumps offer the classic Phantom design with Aeromotive's cutting-edge fuel delivery technology for the diesel market. Designed for racing applications, the Phantom 300s will ensure the consistent flow you've come to expect, and they are available in single and dual pump models. Choose the one your prefer. Specs and additional features and benefits: * Single pump flow ranges: -- Low range 81.98 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 37.5 gal./hr. at 100 psi, 14 amp, 13.5 V * Dual pump flow ranges: -- Low range 163.96 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 75 gal./hr. at 100 psi, 14 amp, 13.5 V * In-tank gerotor pump stays cooler and quieter than an exterior pump * Has a higher flow than most factory lift pumps * Extended bracket length allows for installation in deeper tanks (6 to 20 in.) * 300 micron pre-filter is included

Not Yet Reviewed

$693.35

Aeromotive A1000 Brushless Variable Speed In-Tank Fuel Pumps

Aeromotive A1000 brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these TVS (True Variable Speed) models offer the advantage of pump speed control via their 0-5 V analog DC input signal. They are designed for cool and quiet operation with various models, including those for fuel cells and shallow fuel tanks. Order the Aeromotive A1000 brushless variable speed in-tank fuel pumps best suited for your application. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Most models run 90 psi continuous and some can handle 150 psi peak pressure (base plus boost) * Some models include two stainless steel T-bolt clamps (12703) for mounting * Shallow tank models are for fuel tanks as shallow as 6.7 in. * Shallow tank model with 90-degree outlet only 1 5/8 in. above mounting surface

Not Yet Reviewed

$1,384.05

—

$1,467.35

Agility Auto Parts Mechanical Fuel Pumps

Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.

4.41 out of 5 stars ( 22 )

$33.99

GMB External Fuel Pumps

GMB external fuel pumps are designed as a direct-fit replacement of your worn-out or malfunctioning factory part to help restore proper fuel system functionality. Made to OEM standards, these external fuel pumps will provide improved pressure and flowrate and have been house-tested, so you can expect years of reliable function with a hassle-free installation and service. Bring your vehicle's fuel system back to proper working order with top-notch components by GMB—a reliable manufacturer of premium quality parts.

3.67 out of 5 stars ( 12 )

$33.99