Availability
Showing In Stock Items. Show All 18 Items.
Keep contaminants in fuel from entering your fuel lines with these fuel tank pick-up tube filters from OER Authorized! These filters are direct replacements for the original strainers. They're available in a choice of sizes to correctly fit your application.
( 42 )
$14.99
Aeromotive Phantom Apex in-tank fuel pumps open the door to OEM convenience—but with high-horsepower pump flow rates that only Aeromotive pumps can provide. These gasoline, E85 type fuel pumps utilize an advanced, patent-pending jet-siphon technology that provides a constant supply of cool fuel to the Phantom bladder, allowing the system to dominate in extreme applications. From extreme cornering loads to extreme off-angle vehicle environments, these pumps maintain fuel supply to the Phantom pump and bladder assembly—even when fuel tank levels are low and fuel is moving away from the pump location. The pumps are available in different flow rates. Additional details: * Kits include 4 ft. of gasoline and ethanol-rated suction line, with a controlled pickup that maintains 1/8 in. clearance to the tank bottom * Pickup line can be secured to the intended pickup point within the tank via a 2-magnet system (compatible with any tank material: poly-plastic, aluminum, stainless steel, and mild steel) * Jet-siphon P/N 187056 is also sold separately (for use with your existing Phantom fuel pump)
( 2 )
$981.95
—
$1,104.45
Aeromotive Apex jet siphons add patent-pending technology to your existing Phantom system. Apex jet siphons provide a constant supply of cool fuel to the Phantom bladder, which allows your system to dominate any extreme application with an uninterrupted flow of gas. They're designed with 4 ft. of gasoline/ethanol-rated suction line and feature a controlled pickup that maintains 1/8 in. clearance to the tank bottom. Pick up fuel from the corner of the tank or saddle bag for an optimal fuel supply at all times with Aeromotive Apex jet siphons.
Not Yet Reviewed
$357.55
On Sale
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 26 )
$150.00
—
$532.00
$135.00
—
$478.80
BluePrint Engines complete EFI fuel pump and plumbing kits are your solution when completing the fuel system on your Sniper, Sniper 2, or any EFI engine such as Hemi or LS. BluePrint expanded on other fuel pump kits by upgrading to stainless braided, PTFE lined, ethanol compatible hose. They also include all the ferrule type PTFE aluminum AN fittings to make your system safe, clean, and look great! You're given all the necessary hose ends, mounting clamps, pump, drop tube, etc. to get the complete job done! AN- O-ring fittings are also included for use if pairing with a BluePrint engines fuel pressure regulator! Features and benefits: * Free flow rate: 80 gph * Maximum pressure: 60 psi * Inlet attachment: Female threads * Inlet size: 10mm x 1.0 * Inlet quantity: One * Outlet attachment: Female threads * Outlet size: 10mm x 1.0 * Outlet quantity: One * Quantity: Sold as a kit * Includes: 40 ft. of 3/8 in. PTFE stainless braided fuel hose * Post pump fuel filter * Necessary hardware and bulkhead fitting to return fuel into the tank * Note: the included insulated mounting clamps are sized to allow both feed and return line to be run side by side and neatly fit into a single clamp * Forced induction horsepower at 60 psi: 530 hp * Naturally aspirated horsepower at 60psi: 690 hp * Similar to Holley 526-7 kit. Perfect for use with Hemi, LS, and Holley sniper systems such as 550-510-3XX and 550-511-3XX
Not Yet Reviewed
$499.95
On Sale
Holley Retrofit 525 LPH replacement fuel pumps are ideal replacements for Retro-fit and fuel cell pump models supporting 1200 EFI or 1450 carb hp (at 60 psi at 13.5 V/16.9-amp draw; individual systems will vary based on fuel system design, regulator type, fuel cell location, etc.). These fuel pump service parts come with a fuel supply tube, clamp, foam pump sleeve and sealing ring to help make your installation quick and easy. Once installed, hook up the fuel lines and power source/ground and you're off and running!
Not Yet Reviewed
$299.95
$269.95
Now you can get more performance from your diesel with Aeromotive diesel lift pump kits! They're built with features you'll appreciate, such as: Precise pressure control via the Aeromotive convoluted diaphragm regulator; a fuel pressure gauge for accurate system pressure monitoring; a built-in check valve to keep the system primed; a submersible motor design with no dynamic shaft seals to erode; and a CAT 2-micron fuel filter. Duramax kits include a "fail safe" valve. In the event of failure or a no-run condition, the valve opens and allows fuel to bypass the pump—so the engine continues to run and you can get to your destination, eliminating tow bills. Order the model recommended for your application. Additional features include: * Unique draw-through technology * 3/4 in. in tank pickup tube * 100 micron in-tank filter * In-tank baffle included, eliminating 1/4 tank issue * Quick-disconnect fittings for all fuel lines * 1 in.-14 fuel filter thread allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; no shaft seal to fail or leak * Wiring harness with Delphi sealed Weatherpack connectors (vehicle-specific pumps only) * Self-priming, no need to pre-fill the filter during install or filter swap * Available with your choice of gph ratings * OEM-style return; no need to modify the filler neck
Not Yet Reviewed
$2,331.00
—
$2,398.35
Aeromotive 12-Series mechanical pump inlet port adapter fittings are designed for operational use on the 12-Series fuel pump inlet (suction) port. These black anodized aluminum bolt-on kits provide either AN -16 male flare, or 1.250 in. barb inlet port adapter connections, depending on application. Aeromotive 12-Series mechanical pump inlet port adapter kits get your high-flow 12-Series fuel pump properly connected to the rest of your fuel line. Order the kit designed to fit your application. Features, items, and specs may include: * High-flow capacity * O-rings and stainless steel fasteners * Suitable for hex or belt-driven pumps * Supports 1 1/4 in. hose or hard tubing inlet (1.250 in. barb inlet port adapter only) * Requires bib hose and clamps with tubing (1.250 in. barb inlet port adapter only)
Not Yet Reviewed
$50.90
Trans-Dapt fuel pressure regulators are chrome plated and regulate fuel pressure from 1-6 psi. These regulators include fittings for 5/16 in. and 3/8 in. fuel lines, along with connector tubes and clamps.
( 5 )
$94.99
These complete fuel system kits from Summit Racing™ come with a fuel pump and a regulator. You also get a canister fuel filter, fuel line, fittings, hose ends, plug, and insulated line clamps. They're the easy way to plumb your fuel system.
( 9 )
$352.80
Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.
( 21 )
$33.99
On Sale
Clearance
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 16 )
$119.99
$65.50
—
$204.99
Agility Auto Parts offers a complete line of electric fuel pumps covering a wide variety of North American vehicle applications. They are engineered and manufactured in a highly automated and dust-free environment and meet or exceed all OEM specifications. Agility Auto Parts ensures premium quality through stringent performance and reliability testing for pressure characteristics, flow rates, electrostatic discharge, and they are 100 percent leak tested.
( 5 )
$49.99
—
$73.99
Tanks Inc. fuel pump assembly plates are necessary components when installing your GPA fuel pumps. These hangers come equipped with a wiring harness and 1/4 in. NPT supply and return line.
( 5 )
$104.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
