Availability
Showing In Stock Items. Show All 11 Items.
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
Not Yet Reviewed
$725.70
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$518.95
—
$549.95
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
The Titanium Signature Series diesel fuel system is engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting, and most reliable aftermarket filtration system in the diesel industry. Rated at up to 240 gallons per hour (depending on model), high pressures of 70 psi, and backed the FASS limited lifetime warranty, Titanium Signature Series lift pumps can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 600-900 hp aggressive tuning and high performance fuel system upgrades. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your Powerstroke's injection systems, effectively extending the life of both your injection pump and injectors. These benefits include an improved filtration rating of 2 microns, a built-in water separation filter, and FASS Diesel Fuel Systems' patented air/vapor removal process. Aftermarket lift pumps are important for both drivers and high performance applications when looking to improve either fuel economy or increase horsepower/torque. Kits include a FASS bulkhead and suction tube kit. Machined from 6061 T-6 billet aluminum, the bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1/4 tank and 1/8 tank issues when installed correctly. The pickup tube is fabricated from PTFE, which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty. These are complete replacements for factory lift pumps and hold a pressure of 45 psi.
( 1 )
$683.55
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$577.99
Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.
( 1 )
$503.45
—
$598.45
FUELAB has brought cutting edge fuel system technology to the performance marketplace for years. Their Velocity 100 inline high performance lift pumps offer all the great features of brushless technology fuel pumps in a standalone unit designed for the diesel performance market. Build your fuel system around the most advanced fuel pumps on the planet! FUELAB Velocity 100 inline high performance lift pumps features include: * High-efficiency sling vane positive displacement * Special housing shape for extremely quiet operation and steady pressure * Carbon 9-vane construction with pressure-balanced rotor for high reliability * Replaceable filter element * Lightweight super-efficient DC brushless motor reduces current draw * Low-mass rotor for high-speed reaction to changes in speed and flow * Powerful high-flux density Neodymium rare earth magnets * Wet motor design, with no dynamic shaft seals that can wear out * 12 to 24 V vehicle electrical system compatibility * Continuous-duty motor speed can be adjusted for appropriate demand * Superior valve design and components for stable pressure * Billet aluminum construction with anodizing per MIL-A-8625, Type II * High-quality mounting brackets that mount directly to frame * Long-life, multi-fuel compatible Fluorosilicone static seals * Accepts standard or port-style -10 AN fittings
Not Yet Reviewed
$555.11
DeatschWerks X2 Series fuel pump modules are available for a variety of models. These assemblies are compatible with gasoline or ethanol. Order the model recommended for your application.
( 1 )
$669.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
