Availability
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 309 )
$226.95
—
$239.95
$179.95
—
$204.25
On Sale
These Red electric fuel pumps from Holley feature an improved design for street and strip applications, and a tumble-polished billet look with the distinctive red logo. These pumps have a 97 gph flow rate, draw only 2 amps, and have a maximum pressure of 7 psi with an externally accessible pressure relief valve. They weigh only 2.88 lbs., and include a mounting bracket.
( 279 )
$199.95
$179.95
On Sale
AEM Electronics high-flow external electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable service and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a pre-filter, hose, clamps, and flying lead. Select the model with the size, psi limit, and flow rate needed for your application.
( 34 )
$189.95
$170.95
On Sale
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$749.00
—
$2,599.00
$636.65
—
$2,209.15
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$669.00
—
$699.00
$602.10
—
$629.10
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
On Sale
Get fuel where you need it to go using one of these FiTech fuel delivery kits. They include an upgraded 255 lph external electric fuel pump for engines making up to 600 hp. A 20 ft. section of EFI grade fuel hose is provided—suitable for both inlet and return hoses between the fuel tank and the engine. The FiTech fuel delivery kits also feature two billet aluminum fuel filters, push lock hose ends, and a mounting clamp for the electric pump.
( 20 )
$297.00
$267.30
On Sale
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
$196.15
On Sale
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 26 )
$150.00
—
$532.00
$135.00
—
$478.80
On Sale
Holley Mighty Mite electric fuel pumps are small in size, but BIG on performance! They are quiet, easy to install, and work with gas, diesel, blended alcohol, and E85. The pumps use a standard 12 V power source; while a reliable solid-state design provides longer life. Mighty Mites have a simple 2-wire hookup, are self-priming and regulating, and deliver super-quiet operation at only 65 dB! They are 12 in. dry lift capable and great for carbureted trucks, cars, generators, and agricultural equipment. You can also use them as transfer pumps!
( 244 )
$75.09
—
$165.95
$67.55
—
$149.35
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$349.95
—
$649.95
$314.95
—
$583.95
On Sale
Multi-port EFI systems require a stable fuel supply to maintain the best performance throughout the engine's rpm range. MSD high-pressure, high-flow fuel pumps feature a roller vane pump mechanism, which is extremely resistant to clogging and jamming. The pumps mount in-line (out of the tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. These MSD pumps are ideal as "boosters" for nitrous oxide applications, or as stand-alone pumps for multi-port EFI systems on engines up to approximately 500 hp.
( 50 )
$162.95
$146.65
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 356 )
$136.95
—
$286.95
$104.95
—
$258.25
On Sale
FiTech Force fuel systems make the upgrade to fuel injection easier! They simply connect to a stock mechanical or electric fuel pump, then supply the EFI system with high pressure through the use of an internal 340 lph (approximately 90 gph) pump. The strong, versatile bracket allows mounting under your existing fuel pump, which feeds the units. The assemblies hold a half-gallon of fuel to submerge the internal pump and keep it cool for long life, with no chance of fuel starvation. An internal regulator maintains the pressure at a consistent 58 psi—which is ideal for reliable EFI performance. Order a FiTech Force fuel system and forget about running a new feed line from the tank! Models are available in different configurations. Features, items, and specs: * Serviceable 10-micron fuel filter keeps the finest debris away from the injectors * 5 ft. of high-pressure fuel hose * AN fittings * Clamps * Precision-machined extrusion designed for strength and sealed tight * Easy-to-view fuel pressure gauge installed for quick checks * Heavy-duty wire terminals to complete the installation
( 18 )
$415.00
—
$547.00
$373.50
—
$492.30
On Sale
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 161 )
$149.95
—
$272.95
$134.95
—
$245.65
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
$718.95
—
$898.95
On Sale
FASS Fuel Systems Dodge replacement lift pumps are designed to replace a faulty factory pump in Dodge Cummins 24-valve diesel engine applications. They will connect to the stock fuel fittings and wiring harness; and increase fuel flow beyond the capabilities of the OEM lift pump. Order the model recommended for your vehicle and engine application. Additional details: * Larger, more powerful motor * Direct fit * Simple installation * Some pumps include installation hardware * Supports Cummins common rail engines
( 86 )
$204.25
—
$369.55
$183.82
—
$332.60
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$549.95
—
$699.95
$493.95
—
$628.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$502.89
$200.90
—
$455.79
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$190.95
—
$318.95
$171.85
—
$287.05
On Sale
Holley Black electric fuel pumps feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive black logo. These pumps have a 140 gph flow rate, only draw 4 amps, and have a maximum pressure of 14 psi with an externally accessible pressure relief valve. They weigh only 3 lbs. and include a mounting bracket.
( 83 )
$299.95
$269.95
On Sale
FASS Fuel Systems Titanium Series replacement pumps are far superior to your factory fuel filter. They have a filtration rating of 3 micron, and the added filtration will help improve your engine's idle and extend the life of the injectors and injection pump. These systems feature a compact design with a very powerful motor which holds up to the most extreme conditions—and is capable of flow rates of up to 220 gph. In addition to improved fuel flow, the FASS Titanium Series lift pumps offer an advanced filtration method for your diesel fuel, removing water, air, vapor, and debris. Universal-fit and application-specific models are available.
( 23 )
$275.50
—
$729.00
$247.95
—
$656.10
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$111.95
—
$162.95
$100.75
—
$139.45
On Sale
When you press the accelerator to the floor, does your ride cough, sputter, and basically plead for more juice? FiTech EFI frame mount fuel pumps flow up to 255 lph (67 gph) to keep you and your vehicle in sync. These pumps are the perfect addition to your modified beast, and can fuel engines up to 600 hp. Get the right amount of fuel to the motor with a FiTech EFI frame mount fuel pump!
( 31 )
$109.00
$98.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
