Availability
Showing In Stock Items. Show All 44 Items.
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
—
$1,049.00
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$949.95
$853.95
Edelbrock supplemental fuel pump kits are required for GM trucks and SUVs utilizing Edelbrock E-Force supercharger systems. Failure to use these may result in engine damage and void your E-Force warranty. They are not required for Flex Fuel models due to their adequate fuel systems that already operate properly with the Edelbrock E-Force supercharger systems. These supplemental fuel pump kits include a replacement fuel pump, control module, and sending unit.
Not Yet Reviewed
$760.95
—
$852.95
On Sale
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$847.70
—
$1,037.10
$762.93
—
$933.39
On Sale
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 90 psi with Signature models), featuring a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Includes two stainless steel T-bolt clamps (12703) for mounting * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 HP
( 1 )
$859.90
$773.91
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$799.00
—
$849.00
The Titanium Signature Series diesel fuel system is engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting, and most reliable aftermarket filtration system in the diesel industry. Rated at up to 240 gallons per hour (depending on model), high pressures of 70 psi, and backed the FASS limited lifetime warranty, Titanium Signature Series lift pumps can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 600-900 hp aggressive tuning and high performance fuel system upgrades. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your Powerstroke's injection systems, effectively extending the life of both your injection pump and injectors. These benefits include an improved filtration rating of 2 microns, a built-in water separation filter, and FASS Diesel Fuel Systems' patented air/vapor removal process. Aftermarket lift pumps are important for both drivers and high performance applications when looking to improve either fuel economy or increase horsepower/torque. Kits include a FASS bulkhead and suction tube kit. Machined from 6061 T-6 billet aluminum, the bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1/4 tank and 1/8 tank issues when installed correctly. The pickup tube is fabricated from PTFE, which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty. These are complete replacements for factory lift pumps and hold a pressure of 45 psi.
( 1 )
$849.00
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
Aeromotive Eliminator marine fuel pumps are "water warriors"! With 25 percent more flow than the A1000 model, they rid your race craft of poor performance by feeding your engine with enough fuel to maintain its winning ways. Eliminators are certified to ISO 8846, SAE J1171, and United States Coast Guard requirements for ignition protection and fire resistance. Plus, these marine pumps are built to survive over 2,000 hours of continuous run time. Battle the waters successfully with Aeromotive Eliminator marine fuel pumps on board. Other Eliminator marine features: * Compatible with all pump and racing gasoline * Up to 2300 hp--carbureted engine naturally aspirated * Up to 1700 hp--carbureted engine forced air induction * Up to 1900 hp--fuel injected engine naturally aspirated * Up to 1400 hp--fuel injected engine forced air induction
Not Yet Reviewed
$1,082.70
$974.43
On Sale
Aeromotive A1000 brushless variable speed fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery—with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps feature a bedrock solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise and more reliability. With a higher level of efficiency, down to fractions of a second in design speed control, Aeromotive A1000 brushless variable speed fuel pumps afford precise control via a 0-5 V analog DC input signal—better maintaining pump rpm and flow, producing a flatter flow curve. Tight tolerances result in less current draw, less heat, and extended life. Order the body style preferred for your application. Features and specs include: * ORB-10 inlet and outlet ports * Fully submersible for custom, in-tank placement * Fuel Injected engines: -- up to 1300 FWHP – naturally aspirated -- up to 1000 FWHP – forced air induction * Carbureted engines: -- up to 1500 FWHP – naturally aspirated -- up to 1200 FWHP – forced air induction
( 1 )
$959.65
—
$1,015.90
$863.68
—
$914.31
Keep the fuels flowing with Edelbrock Quiet-Flo electric fuel pumps. They're engineered with heavy-duty internals for extreme durability; while the inline fuel flow design keeps everything cool, even in harsh environments. The housings are constructed of aluminum and have a hard anodized finish for great looks. Edelbrock tests every Quiet-Flo fuel pump at the factory to ensure dependable, lasting performance. Some units also include mounting brackets. Order the model with the inlet/outlet sizes, fuel pressure, and flow rate desired for your gasoline or methanol application.
( 115 )
$838.95
GMB electric in-tank fuel pumps are tested for function and performance. Built to OE specs under strict manufacturing guidelines, they work and look just like the factory sending unit. Malfunctioning fuel pumps deplete the effectiveness of your engine and your vehicle as a whole. GMB pumps are built to feed fuel from the tank and transfer a constant flow of fuel to the engine, while controlling pressure to prevent flooding. Order the replacement model designed for your year, make, and model application.
( 10 )
$834.99
—
$918.99
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$899.95
DeatschWerks DW400 in-tank electric fuel pumps are designed to handle the ever-increasing power outputs of today's aftermarket engines. The DW400 model surpasses the standard benchmark by delivering an industry-leading in-tank flow of 415 lph at 40 psi. These fuel pumps have a 46mm diameter and are suitable for use with pump gas, E85, and race fuels. They're also compatible with pulse width modulated pump drivers. DeatschWerks DW400s ship with a universal fitment kit, which includes fuel hose, clamps, electrical harness, and filter.
( 8 )
$1,049.00
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 253 )
$763.99
—
$1,229.99
DeatschWerks have taken their DW400 electric fuel pump and turned it into an in-tank drop-in module. These modules feature a fuel pump that flows 415 lph and uses an impeller made of a lightweight composite that's impervious to fuels like E85 and race fuel. DeatschWerks DW400 in-tank electric fuel pump modules are available for a variety of applications.
( 9 )
$849.00
—
$1,109.00
APR high-pressure fuel pumps dramatically increase the maximum volume of fuel the HPFP can deliver. In doing so, the direct-injection fueling system is capable of satisfying fueling requirements set forth by high-horsepower setups. This is accomplished by increasing the displacement of the pump using high-quality components to exacting tolerances.
Not Yet Reviewed
$999.95
The APR low pressure fuel pump upgrade is designed to ensure the low pressure fueling system is capable of delivering the proper volume of fuel from the fuel tank to the high pressure fueling system under high demand situations. The pump operates off of a pulse-width modulated signal sent from the pump's control module, which is mapped in the ECU. As fueling demand increases and decrease, the pulse signal adjusts to send only the required amount of fuel through the pump.
Not Yet Reviewed
$849.95
Delphi electric fuel pumps are manufactured from high-quality materials. They operate under extreme temperatures and provide your vehicle with quicker engine starts. These fuel pumps are designed to be OE replacements, though universal models are also available. Find the free flow rate, maximum pressure, inlet size, and other options needed for your application. When fuel pressure becomes a problem for your vehicle, order a new Delphi electric fuel pump to restore performance!
( 48 )
$921.99
—
$1,043.99
Delphi fuel injection pumps feed your gas or diesel engine. Precisely delivered fuel keeps your engine running smoothly and provides the right amount of fuel to gain power. These Delphi pumps are built from quality materials and are validated by Delphi to ensure the best performance in your rig. Give your cylinders equal shots of fuel for better performance with Delphi fuel injection pumps.
Not Yet Reviewed
$757.99
—
$1,208.99
DeatschWerks X2 Series fuel pump modules are available for a variety of models. These assemblies are compatible with gasoline or ethanol. Order the model recommended for your application.
( 1 )
$849.00
DeatschWerks DW300 X2 Series fuel pump modules include accommodation for pumps, integration of a return fuel line, and retention of all the functionality of OE module. The DW X2 Series modules consist of a top-hat, center section, and OE lower bucket. These components work together to deliver the flow you need and the functionality you want. Choose the model designed for your vehicle.
Not Yet Reviewed
$799.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
