Availability
Swap your 2.3 turbo into another Ford with Ford 2.3 turbo EFI engine swap wiring harnesses from The Detail Zone. Great for replacing factory-equipped 2.3 turbo vehicles as well, these partially wrapped TDZ wiring harnesses come complete with circuits for the electric fan, fuel pump, diagnostic port, check engine light, water temperature/oil pressure, and alternator. And, to make your install easier, a firewall grommet, instructions, and enough high-temperature zip loom and harness wrap tape are included. Make a swap or replace an existing harness with The Detail Zone Ford 2.3 turbo EFI wiring harnesses.
( 2 )
$676.15
Take control of your Ford wiring job with Telorvek Ford 2.3 turbo EFI wiring harnesses from The Detail Zone. Featuring the Telorvek panels, these harnesses are your solution for a professional looking job and a trouble-free start-up. Detail Zone includes everything you need to get your ride to run like factory. Correct Ford connections, terminals, and 20 ft. of fire-resistant wire for each sensor--no predetermined wire lengths--are enclosed, allowing you to place the ECM anywhere you desire! You're in control with a centrally located panel, step-by-step instructions, and printed wire. Get a guess-free install with Telorvek Ford 2.3 turbo EFI wiring harnesses from The Detail Zone.
Not Yet Reviewed
$739.85
Swap out or replace an existing harness on your 1987-88 Ford Thunderbird Turbo Coupe 2.3L turbo with Ron Francis Wiring's direct replacement Ford 2.3L turbo EFI injector harnesses. These harnesses are factory-dimensioned, and come with circuits for the electric fan, fuel pump, diagnostic port, check engine light, water temperature/oil pressure, and alternator. They're also emissions-compliant for an OBD-I system. To make installation trouble-free, the harnesses come complete with instructions, and include assorted 300 degree F wire looms, harness wrap, and zip ties (not bare wire) for a finished look and protection.
Not Yet Reviewed
$156.75
Do you need to wire your turbocharged ride? The Detail Zone Telorvek Buick 3.8 turbo EFI wiring harnesses are your best solution. These closed-loop Buick systems are fully functional and scannable. All Detail Zone EFI wiring harnesses feature Telorvek panels. They are your convenient central location for wiring fuses and relays, plus everything you need for runs-like-factory circuitry, including connectors, terminals, and fire-resistant wire--20 ft. per sensor! And the wire is printed with sensor and terminal information, so there's no guessing where it goes! In the Buick Grand National, this engine took the street racing scene by storm. Make sure that the attention your ride receives isn't due to a bad wiring job. Do it right with professional results and Telorvek Buick 3.8 turbo EFI wiring harnesses from The Detail Zone.
Not Yet Reviewed
$754.55
APR multi-port injection systems upgrade the factory manifold on vehicles lacking MPI from the factory and are required to safely support higher power levels. APR multi-port injection system upgrades include four 980cc ethanol-compatible Bosch Motorsport MPI injectors, harness, fuel rail, rail sensors, distribution block, and everything needed install the system to the factory intake manifold. Please note: System is designed for use only where required by an APR turbocharger system upgrade with matching software. Features: * Bosch EV 14 CKxT MPI injector * APR Bosch Jetronic to OEM harness * Supports up to 8 Bar of use in motorsport configurations * E85 and M100 compatible * 30 degree single cone spray angle with 0 degree bent angle and gamma angle * 33.6mm compact body * 24mm extended tip nozzle * Top-feed injector * 12 ohm coil resistance * ECU software required for use
Not Yet Reviewed
$1,399.95
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 67 )
$329.00
—
$1,259.00
These FAST fuel injector adapter harnesses enable easy retro-fitting of both new and old-style electronic fuel injectors. New-style fuel injectors can be used on vehicles equipped with older-style mini-timer connectors. They come complete with terminals, seals, and plugs and will plug in with no modifications.
Not Yet Reviewed
$124.95
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$65.99
—
$127.99
Radium Engineering offers fuel rails for a variety of styles for specific year/make and engine applications. Manufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC-machined from aluminum, black anodized, and laser etched for a high-quality surface finish. The kits are compatible with all fuel types, including popular alcohol mixtures such as E85. Included are: aluminum fuel rail(s), hardware, and spacers (depending on model). Order the model recommended for your vehicle.
( 2 )
$213.70
—
$256.45
Holley LS throttle bodies are unquestionably the biggest bore and most feature-loaded option available. Holley went back to the drawing board and built the ultimate air valve for your LS engine. They are available with huge 105mm or 95mm bores--and low rpm, drive-friendly tapers. The 105mm version is designed for drag race applications when wide-open throttle is all that matters. Features like idle bleed adjustment, TPS clocker, and PCV passage defeat valve units, making them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holley LS throttle bodies are manufactured from high-grade billet aluminum, and black anodized to give them a modern tech look, they're maximized for your application.
( 11 )
$826.95
—
$849.95
If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems. Additional Go EFI 4 Power Adder features: * Throttle body is boost-ready * Can change air/fuel ratios and ignition timing on-the-fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet flow swirl spray annual discharge obtains complete atomization * Built-in pressure regulator * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Complete tuning from Pro Laptop software * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 56 )
$1,277.00
—
$1,494.99
How do you add more horsepower to a Hellcat? By adding BBK Hemi Hellcat throttle bodies. They are designed to withstand the abuses of modern day turbos and race vehicles. With full billet CNC construction, OEM electronics, and an easy installation, BBK Hemi Hellcat throttle bodies deliver increase airflow to your engine, adding more horsepower and torque to the wheels. Features include: * 20 hp plus increase depending on boost and tune * CNC-machined from solid billet aluminum * Full billet CNC for maximum durability and longevity * Large 100mm throttle body bore for maximum airflow * Black anodized finish with CNC-machined BBK logo * OEM-quality throttle gear, double-sealed bearings, and O-ring throttle shafts
( 1 )
$619.99
FiTech Go EFI 2x4 Power Adder 1200 hp fuel injection systems are for the guys who have 671 and 871 roots superchargers or make up to 1200 hp naturally aspirated on their dual-quad setup. These easy self-tuning systems work out of the box on your 2x4 blower plate as an inline setup or can be side mounted using custom linkages. Also, the kits are a bolt-on for the most popular normally aspirated dual-quad and tunnel ram manifolds, including the Edelbrock line of dual-quad manifolds, without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains, while the second holds four additional injectors. These can also be used in cross ram and tunnel ram configurations. Application notes: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, etc. engines making 250 hp up to 1200 hp with a dual quad intake manifold. Replacement for any dual-quad carburetors for engines with 250 hp up to 1200 hp. Use the same size air cleaner you would normally use for your dual-quad carburetors. Product features: * 2.5 BAR internal MAP sensor * Suitable for up to 1200 hp * (8) Flow matched injectors * (2) Fan control * Blower and turbo ready * Support for nitrous * Boost and nitrous timing * Ignition timing control * Built-in pressure regulator * Air/fuel ratio tuning * Pro-tuning laptop software * Bright aluminum or matte black finish * NOTE: Some models include Go Spark CDI box Kit contents: (2) Diecast throttle body (1) Oxygen bung kit (1) Hand-held controller (1) CTS sensor (1) Hand-held controller cable (1) CTS adapter (1) Windshield mount (1) Mini USB cable (1) 4+2-Pin Connector (2) Return plug (1) Oxygen sensor (1) Gasket kit
( 11 )
$2,236.00
—
$2,347.99
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Hy-Fuel tight-fit modules are for enthusiasts that demand more from their system, or who are planning a future upgrade! This system is capable of 25 lbs. of boost right out of the box; it can be used in a blow-through turbo or blower application, or on a single roots-style supercharger. Also, you can run a single stage of wet nitrous and control air/fuel, as well as ignition timing. Each Hy-Fuel tight-fit in-tank retrofit kit is a sleek miniature assembly designed to allow you to fit a high-volume fuel system into almost any tank. This application is perfect for both original and aftermarket fuel tanks, as well as fuel cells with limited space. It can also be used with a Tanks, Inc. EFI tank. Additional features of the Go EFI 4 600 hp Power Adder system: * Boost-ready throttle body * Boost-ready ECU 2.5 Bar MAP sensor good for 21.7 psi * Nitrous control with safety features and accessories for tuning * Nitrous and Boost specific target air/fuel target options * Boost and Nitrous timing retard strategies * Two-fan control (can be set at separate temperatures) * Air-conditioning idle speed input kick up * Advanced hand-held tuning mode enabled * Pro Laptop software You also get standard features included in this Go EFI system: * Four Hi-Flow 600 hp injectors * Initial setup is quick and easy (simple touchscreen selections) * Self-tuning (after startup ECU immediately takes over and provides your vehicle with an optimum tune) * Basic install can be done with just four wires and two sensors * ECU is mounted on the throttle body (no external boxes or harnesses to clutter up engine compartment or under dash) * Uses a Bosch 4.2 wideband oxygen sensor * Throttle linkage suits most transmissions * Go EFI systems feature wet-flow technology and have a unique Swirl Spray Annular discharge design for complete atomization * Built-in pressure regulator * Can change air/fuel ratios and ignition timing on the fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Plus, many more features
Not Yet Reviewed
$1,956.99
BBK Ford Raptor Black Billet Series throttle bodies highlight your truck with top-quality materials, an easy installation, and improved power and throttle response. Designed to withstand the abuses of the modern day turbo or race vehicles, BBK Black Billet Series throttle bodies are fully CNC-machined from billet aluminum stock, ensuring maximum durability and reliable performance every time. They are black anodized and machined with the BBK logo. Matching the robust construction and style is, of course, performance. With a 73mm throttle body bore increasing airflow, your engine will have more horsepower and torque to the wheels—approximately an 8 to 15+ hp increase over stock, depending on boost and tune. OEM electronics, OEM-quality throttle gear, double sealed bearings, and O-ringed throttle shafts are included. BBK Ford Raptor Black Billet Series throttle bodies are direct-fit, bolt-on replacements.
Not Yet Reviewed
$569.99
APR fuel injector retaining rings are designed to keep your fuel injectors in place. These retaining rings are made from quality material, and meet or exceed OEM specifications. They are available for a range of applications. Whether you're getting ready to install a big turbo or just servicing your injectors, you're going to need the right hardware to get it done. APR fuel injector retainer rings are just the parts to help you complete your project.
Not Yet Reviewed
$44.95
On Sale
COBB Tuning Subaru fuel rail line kits are incredibly robust. Offering 2,500 psi operating pressure and greater than 10,000 psi burst pressure, these kits allow for increased fuel capacity and consistent performance at each injector. Designed to be used along with COBB fuel rail kits, all lines are pre-assembled with double-swivel sport crimp-style hose ends; and the stainless reinforced PTFE line with black covering has a 3 in. minimum bend radius—which allows for a straightforward installation when used as intended. Upgrade your Subaru's fuel system with COBB fuel rail line kits, so you can take advantage of airflow modifications such as intakes, exhausts, or turbochargers.
Not Yet Reviewed
$595.00
$535.50
On Sale
Upgrading your fuel system is required in order to take advantage of airflow modifications such as intakes, exhausts, or turbochargers. The COBB fuel rails allow for increased fuel capacity and consistent performance at each injector. They are constructed of 6061 billet aluminum and feature a black anodized finish with a laser-etched COBB logo. Each rail comes with adapters pre-installed to allow for plug-and-play installation with the COBB fuel line kit. Phenolic thermal spacers and stand-offs provide a heat barrier between the cylinder head and fuel system and are included with each kit.
Not Yet Reviewed
$300.00
$270.00
On Sale
Holley EFI Dominator throttle bodies are the ultimate air valves for your hotrod's powerplant. These billet aluminum 2,550 cfm throttle bodies are loaded with features that will make them at home on even the largest displacement engines. They showcase roller bearing throttle shafts for ultra-smooth throttle action, non-contact magnetic throttle position sensors (TPS) sensors, and index-able throttle levers. Their lightweight construction also features dual throttle blades for maximum airflow and they are available with and without supplemental injector provisions (four injectors per throttle body and rails). Want to maximize your engine's power? Whether you have a turbo, supercharger, or a big cam engine pumping massive gulps of air, Holley EFI Dominator-flange throttle bodies will make the most of your fuel injection.
Not Yet Reviewed
$2,199.95
$1,429.95
Caspers Electronics XFI to Grand National adapter modules are plug-and-play units designed to permit the XFI fuel management computer to directly interface with the electrical system of your Buick-powered turbo engine harness. Installation is easy and reliable. The adapter is supplied with a laptop connector, which connects to the interface cable supplied by FAST. There is also a wideband sensor connector, which connects to the WBO2 interface cable, also supplied by FAST. This adapter will work with both "bank to bank" and "sequential" systems. The harness's extra-long extension (36 in.) permits installation under the passenger seat, and the adapter module is fitted with a connector that plugs into a 3-bar MAP sensor which can be located away from engine heat, under the dash of the vehicle.
Not Yet Reviewed
$298.99
Clogged or leaking fuel injectors can have a ripple effect on your vehicle, decrease performance and economy. When it's time to remove a faulty injector, Bosch offers dozens of models designed as OE stock replacements. Choose the fuel injectors recommended for your gasoline or diesel application.
( 13 )
$45.79
Mopar Replacement accelerator cables are direct-fit replacements manufactured from quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, or Jeep properly and safely.
( 4 )
$96.99
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$1,404.90
—
$1,417.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
