Availability
Bosch Motorsport electronic throttle bodies (ETBs) are designed to control the fresh air delivery of spark ignition engines in combination with an electronic throttle control (ETC) system. ETB applications with flex-fuel, CNG and LPG are permissible if injected in the air flow after the throttle body. A typical ETC system includes the following components: electronic throttle body, accelerator pedal module, and electronic control unit. Additional features of Bosch Motorsport electronic throttle bodies include: * Many bore diameters available * Opening direction: most are counterclockwise; select ETBs are clockwise * Two redundant sensors control the throttle position * All ETBs have an idle air position * Temperature range: -40 to 284 degrees F (-40 to 140 degrees C) * ETBs can be connected directly to control units with ETC functionality * Supply voltage: 6 to 16 V * Supply voltage sensor: 5 ± 0.2 V * Output signal I: 0 to 5 V for 0 to 90 degrees * Output signal II: 5 to 0 V for 0 to 90 degrees
( 23 )
$118.99
—
$199.99
Caspers Electronics wiring harness adapters allow the use of an LS2 throttle body on an LS1 vehicle. The harnesses feature premium OEM connectors, terminals, locks, and seals to facilitate complete plug-and-play installation and optimum performance. All wiring is high-temperature automotive spec and covered by stock-appearing split loom tubing.
( 10 )
$54.99
On Sale
A tweak here and a trim there—AEM universal trim pots will shape your engine's efficiency for performance. These 12-position trim pots can be used with virtually any engine management system to adjust a number of trims … from fuel and ignition timing to boost and more. Included in each pack is the 12-position trim pot with flying lead that has 12 in. insulated, color-coded wires, two brushed silver trim position decals with ranges from -5 to +6 and 0 to +11, and knob decals. AEM trim pot specifications: * Total resistance: 14.3KO * Cycles minimum: 10,000 * Positions: 12 * Degree rotation: 330 * Mounting: 3/8 in. hole * Jam nut: 1/2 in. hex * Knob set screw: 1/16 in. Allen * Supply current: 5 Vdc
( 7 )
$38.10
$34.29
Caspers Electronics VSS splitters are harnesses that can be used when you need access to the VSS signal for more than one device. For example, if you have an external speedometer or trans controller and need to retain the VSS signal necessary for computer control. Casper VSS splitters are available in two models for older or typical GM vehicles, and both are completely sealed with simple plug-and-play operation. There is approximately 3 in. of wire between connectors. Select the one needed for your vehicle.
Not Yet Reviewed
$34.79
Are you installing a supercharger that requires you to cut the OEM wires and lengthen the connector? Caspers Electronics throttle body extension cables for GM LS2/LS7 engines are your solution. They make it easier and can also be used to tap off the GM LS2/LS7 electronic throttle control cable for nitrous. These GT 6-way throttle cable mate connectors are built to factory specifications with materials rated for underhood applications. Completely plug-and-play, the cables are available in popular lengths.
( 3 )
$47.79
Caspers Electronics fuel injector adapters will allow you to incorporate non-OEM fuel injector plugs into your stock wiring harness. These fuel injector adapters are available with your choice of pigtail or preterminated connections.
( 10 )
$10.99
Fuel pulse dampers, or pulsation dampers, act in tandem with the fuel pressure regulator to ensure stable and consistent fuel delivery to the engine. They do this by smoothing out the pressure fluctuations, or pulsations, caused by the injectors opening and closing, as well as the fuel pump operating. AEM Electronics fuel pulse dampers feature billet aluminum construction with an anodized finish and are ideal for applications with large fuel injectors and high-volume fuel pumps. They are compatible with any fuel and available as a direct-mount or in-line style with a standard or extended psi range. Select the best fit for your fuel system.
( 1 )
$99.95
—
$108.95
On Sale
AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. Their large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.
( 7 )
$173.95
$143.95
—
$173.95
On Sale
AEM CD-7 plug-and-play adapter cables make CD dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. For CD dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!
( 1 )
$40.28
$22.15
Clearance
You don't have to suffer constant carburetor issues in your hot rod or race car anymore. K&N Electronic Carburetor Injection (ECI) are self-tuning bolt-on systems that add a supplemental fuel source to optimize engine performance. And, since they are supplemental systems, you can tap into your current fuel supply and there is no need to run a return line back to your fuel tank. Users have the option to set detailed parameters, including their desired air-to-fuel ratio, injector pulse width, shot volume, progressive injector firing, and minimum/maximum rpm range. The brain of K&N's ECI systems is the ECU, which vigilantly monitors the input from the oxygen sensor to ensure an optimal air-to-fuel ratio is maintained. If the system detects an AFR higher than the user-defined limit, the injector will fire. Unlike a typical electronic fuel injection system, the ECI works cooperatively with your existing carburetor, supporting the fuel flow rates that high-horsepower vehicles require to operate efficiently. If your engine is performing lean, K&N's ECI systems will help make up for the fuel deficit. The kits include everything you need to get started: * Billet aluminum carburetor plate with fuel rail and gaskets * Fuel injector * Oxygen sensor * Injection-molded ECU * Fittings and hardware * Wiring harness Features: * Throttle linkage is unaltered from existing setup * Low-profile plate doesn't add much height under the hood * ECU is weatherproof and small enough to be mounted just about anywhere * ECI wiring harness comes with all connections pre-terminated and each connector is unique, so it only fits one way * Harness is pre-wrapped in wire loom for a seamless look with your existing vehicle wiring harnesses * Installation and tuning are easy
Not Yet Reviewed
$1,134.99
$492.50
Caspers Electronics XFI to Grand National adapter modules are plug-and-play units designed to permit the XFI fuel management computer to directly interface with the electrical system of your Buick-powered turbo engine harness. Installation is easy and reliable. The adapter is supplied with a laptop connector, which connects to the interface cable supplied by FAST. There is also a wideband sensor connector, which connects to the WBO2 interface cable, also supplied by FAST. This adapter will work with both "bank to bank" and "sequential" systems. The harness's extra-long extension (36 in.) permits installation under the passenger seat, and the adapter module is fitted with a connector that plugs into a 3-bar MAP sensor which can be located away from engine heat, under the dash of the vehicle.
Not Yet Reviewed
$298.99
Aisin electronic throttle bodies are manufactured to original equipment specifications for exact form, fit, and function. They are built using Aisin's original equipment technology and know-how to ensure top-notch product quality and reliability. Each one is ready to install with no modifications required. Additional features of Aisin Electronic throttle bodies include: * Complete assemblies including throttle position sensor * Controls the volume of air flowing into the engine * Improves power, fuel economy, and emissions performance
Not Yet Reviewed
$199.99
—
$667.99
Restore proper engine function with Dorman throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Dorman throttle bodies offer durable, reliable performance that is essential to the operation of your engine.
( 16 )
$90.99
—
$2,113.99
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$68.99
—
$1,014.99
Standard Motor throttle body flange gaskets are the right choice for your tuneup. They're manufactured from a variety of quality materials—such as embossed metal, rubber, paper, and graphite composite—for prolonged life and improved performance. These OE-replacements are designed and tested to meet or exceed specifications, and ensure ease of installation. The gaskets are vehicle and engine-specific, so order the parts tailored for fitment on your vehicle. Value and quality are hallmarks of Standard Motor throttle body flange gaskets.
( 2 )
$3.99
—
$7.99
The throttle body is an essential part of the inlet air stream of a modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. A faulty throttle body can cause a check engine light, poor fuel economy, engine hesitation, and excess emissions. Key features of Bosch OE-replacement throttle bodies include: * Actual OE product * Plug and play—no flash update needed * Exact fit, form, and function * Manufactured worldwide on OE production lines * Includes an actuator, a throttle plate, and a throttle position sensor (potentiometer) integrated into one housing
Not Yet Reviewed
$70.50
—
$463.99
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$690.00
—
$1,720.00
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 44 )
$1,399.95
$95.05
—
$1,258.95
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$74.99
—
$901.99
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$469.46
Summit Racing™ drive-by-wire throttle bodies are a perfect upgrade for any late model LS/LSX engine. They're precision-machined from 6061 billet aluminum and come in multiple finishes. The unique blade design allows these throttle bodies to bolt right up to any factory or aftermarket LS/LSX intake manifold—and they utilize the original late model GM 6-pin connector. Their larger bore size allows for increased airflow, which results in fast, smooth acceleration across all RPM ranges. The proprietary electronics and stepper motor allow these throttle bodies to be used on both naturally aspirated and forced induction engines. Tuning is required for installation.
( 7 )
$601.99
—
$621.99
On Sale
Holley Sniper EFI 2GC small bore fuel injection systems let you convert your classic 2GC small bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC small bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1955-69 Chevrolet, Buick, Oldsmobile, and Pontiac vehicles that came with Rochester 2GC small bore carburetors
( 2 )
$1,399.95
$1,258.95
Holley Terminator X wideband adapter harnesses are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU (electronic control unit) features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. This is the wideband adapter harness only.
( 1 )
$62.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
