Availability
Showing In Stock Items. Show All 11 Items.
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 43 )
$95.05
—
$1,399.95
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
DeatschWerks Bosch EV14 Universal fuel injectors represent Bosch's most advanced multi-port fuel injector technology! These injectors deliver an excellent spray pattern and atomization for optimized idle and tuning. They are provided with tuning data and a custom flow report for an easier tuning process. They have 10 different flow rates; so you can choose the combination of features that best meets your needs. EV14 injectors are offered in three different lengths, two different O-ring diameters, and 10 different flow rates; so you can choose the combination of features that best meets your needs. DeatschWerks Bosch EV14 Universal fuel injectors feature low inertia, ball and seat pintle design, and high quality copper coils to deliver fast and precise opening times.
Not Yet Reviewed
$269.00
—
$1,589.00
Edelbrock fuel injectors offer precise, controlled fuel flow for better power, throttle response, and economy. They are available in a number of designs to fit the various Edelbrock fuel injection systems, as well as a wide range of fuel flow rates.
( 14 )
$97.95
These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.
( 119 )
$1,649.95
—
$2,099.95
On Sale
FUELAB high-flow, one-way check valves are designed to deliver maximum flow with minimal restriction and pressure drop. Featuring -6 AN, -8 AN, and -10 AN male inlets/outlets, 350 gph flow capacity, cross fuel compatibility, and billet aluminum construction, these advanced engineered FUELAB valves allow for easy installation and prevent flow back after pump shut down. The check valves are rebuildable, have fluorosilicone seats and seals, and a maximum pressure rating of 200 psig.
( 5 )
$83.00
—
$91.00
$74.70
—
$81.90
Radium Engineering offers top feed fuel rail conversion kits for specific applications. Manufactured with a large 0.69 in. internal bore, the fuel rails can support all necessary engine power requirements. They are CNC-machined from a custom 6063 aluminum, media blasted, black anodized, and laser-etched for a high-quality surface finish. These kits are compatible with all fuel types, including popular alcohol mixtures such as E85. The Radium fuel rail converts the OEM side feed fuel injector setup to top feed, allowing the use of high-flow fuel injectors (not included). Each kit includes two different sets of mounting feet, allowing various height fuel injectors to be used. The anodized aluminum mounting feet secure the fuel rail to the intake manifold reusing the OEM thermal insulating spacers. The fuel injector bores and the included press-fit injector seats are designed for 14mm injector O-rings. These seats include O-rings to prevent boost pressure leaks. They're CNC-machined billet aluminum, anodized, and laser etched.
Not Yet Reviewed
$189.95
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$123.99
—
$272.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
