Availability
Showing In Stock Items. Show All 14 Items.
S&G Tool Aid fuel injection test adapter fittings are made to work with their fuel pressure tester kits to diagnose low fuel pressure, a faulty regulator, leaking injectors, clogged or damaged fuel filters, or fuel leaks. When your vehicle is not running right, the correct diagnostic tool can help to quickly find the source of the problem and help you avoid the added time and expense of tracking down the problem. These fuel injection tester adapters by S&G Aid can help you diagnose issues before they become a problem.
( 1 )
$50.99
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.95
—
$114.95
Radium Engineering's Venturi jet pump kits are designed for high-flow aftermarket pumps and includes three different Venturi orifices to match a wide range of pump flow rates. The Radium jet pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi creates vacuum in the perpendicular port. The Venturi jet pump uses a machined aluminum housing that is anodized, and laser engraved. Kit includes three interchangeable orifices that were precisely calculated, and vacuum pressure tested with multiple pump combinations. All hose barb connections are compatible with 5/16 in. or 3/8 in. ID hose. Also, the crossover siphon port can be easily adapted to common hoses as it uses 6AN ORB (9/16 in.-18 O-ring) female threads.
( 1 )
$85.45
Our lightweight Summit Racing™ fuel rail kits fit like stock, but deliver the increased fuel volume that your LS1 needs for maximum performance. The 3/4 in. i.d. rails are precision CNC-machined from high-strength aluminum with a great looking, black anodized finish. The kits include fittings with Viton® O-rings for a superior seal, mounting brackets, and stainless steel hardware.
( 12 )
$104.99
These FAST fuel rail lines are designed to connect your FAST fuel rails to your fuel source or an additional fuel rail. They are manufactured using stainless steel braided hose and black anodized -6 AN aluminum female fittings. The lines have the fittings pre-crimped, making them easy to install with no fuel rail modifications necessary.
( 8 )
$58.95
—
$77.95
Radium Engineering offers check valves that are expertly crafted from premium materials and built to match your exact requirements. These check valve components are compatible for all fluids, such as gasoline, ethanol, methanol, diesel, water, coolant, oil, etc., and feature a lightweight anodized aluminum body with Viton® seals and stainless steel hardware. The internal plunger's aerodynamic shape warrants a smooth laminar stream. Female -AN ports can accept 37 degree flare male fittings and/or ORB (O-ring boss) male fittings. The flow direction is also laser-etched on the side of the part.
Not Yet Reviewed
$56.95
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a Radium Engineering fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and often help idle surge, especially with high-flow injectors. A fuel pulse damper can also solve erratic lean air/fuel ratio spikes, commonly experienced as "stumbling," that are difficult to tune out. What makes Radium FPDs unique?: Along with having the flexibilty of using common fittings, Radium Engineering FPD's use a vacuum/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator. Features: The anodized aluminum housing features two selectable threaded male fittings. The 8 AN ORB version seals using a FKM O-ring, while the 3/8 in. NPT variation seals with the tapered pipe threads. * The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). These products are safe for use with all fuel types, including alcohol blends such as E85. (Not recommended for the low-pressure side of mechanical fuel pumps.) Included: * Anodized and laser engraved aluminum top, R=range or XR=extra range * Anodized aluminum body with male threads, 8 AN ORB or 3/8 in. NPT * Stainless steel hardware * Rubber vacuum hose, 4mm I.D. * Vacuum hose Y-fitting
Not Yet Reviewed
$85.45
On Sale
Holley EFI fuel pulse dampers act in tandem with the fuel pressure regulator to further control the fuel pressure in an EFI system. They act to smooth out the pressure pulsations caused by the injectors opening and closing as well as the fuel pump operating. These pulsations happen so quickly that in many cases they can't be identified with an analog gauge but can cause issues with fuel delivery to the engine. Options include: * Direct-mount or inline mount * Multiple inlet/outlet dimensions * Standard or extended fuel pressure range * Male or female threads Features: * Engineered to stabilize pressure pulsations caused by the injectors opening; ideal for applications with large fuel injectors and high-volume fuel pumps * Compatible with any fuel; full anodized billet aluminum construction with stainless steel springs and fluorosilicone diaphragm * Fittings included for damper/regulators and direct-mount dampers * 1/8 in. NPT port on body of damper/regulators and inline dampers for easy installation of mechanical pressure gauge or pressure transducer * Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
( 6 )
$106.95
$96.25
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride down the strip or around the track. Aging lines can crack, rust, and leak—affecting fuel economy, as well as performance. These Holley EFI feed lines by Fragola Performance Systems can take the guesswork out of you having to piece together a new feed line yourself. These premium lines are available in a variety of configurations and use strong braided stainless steel crimped PTFE hose and aerospace-quality aluminum fittings that are anodized black for corrosion resistance and lasting appeal. Order the EFI feed line designed for your application needs.
( 1 )
$65.99
BTR offers fuel rail kits for its V2 Trinity intake manifolds. The fuel rails incorporate enhanced injector angles for better part throttle drivability and top-end horsepower when combined with your V2 Trinity intake manifold. These Brian Tooley Racing products are designed for a variety of Chevy engine applications from the 1990s and up.
( 3 )
$99.99
Mopar Replacement accelerator cables are direct-fit replacements manufactured from quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, or Jeep properly and safely.
( 4 )
$96.99
—
$122.99
ATP offers accelerator cables for hundreds of applications. These replacement throttle cables meet or exceed OE standards and will keep you moving forward. They're one of the most inexpensive, yet necessary repairs you can make. Order the length and other options recommended for your specific vehicle and engine—or just match up the OEM part number.
( 202 )
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
