Availability
Showing In Stock Items. Show All 80 Items.
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$1,749.95
—
$1,999.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 8 )
$1,599.95
—
$1,999.95
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,949.95
—
$2,049.95
FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
( 1 )
$2,089.99
—
$2,175.99
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,949.95
—
$2,049.95
FiTech's Go EFI 4 self-tuning fuel injection is ideal for everyday drivers to weekend cruisers or even bracket cars. The system supports engines making up to 600hp yet is capable of the fueling needs of a 200hp street rod. The aluminum throttle body easily fits any 4-bbl intake manifold. Thanks to the built-in ECU, MAP sensor and fuel pressure regulator, wiring is kept to minimum with just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with our wet annular discharge design will you your engine fired up and idling smooth in minutes. All it takes are a few taps of the supplied touchscreen controller which can be left plugged in to use as gauges, or removed and stored in the glovebox. These kits also include FiTech's Go Fuel In-Tank fuel pump module. The unique universal design allows you to install the pump in most tanks ranging from 6 to 15 inches deep. The supplied 340 lph fuel pump is compatible with gasoline, E85, ethanol, methanol and alcohol based fuels. Kits include a billet aluminum module with -6AN O-ring boss fittings, 2 different styles of filters, hardware, seals, and terminals.
( 1 )
$1,655.99
Never has so much power been placed in one compact package! FiTech's Meanstreet is a nitrous compatible system with eight injectors, an onboard ECU, MAP sensor and internal fuel pressure regulator to deliver a simple, clean installation. The Meanstreet's annular swirl, wet flow technology provides the most complete fuel atomization available. Using FiTech's proprietary self-tuning technology, combined with easy tuning of steps with the supplied handheld monitor, you'll have your high powered engine tuned and ready for the street or track. The matte black throttle body bolts to any 4-barrel intake and wiring is kept at an absolute minimum thanks to the built-in ECU. Fuel upgrade is made easy with the Go Fuel In-Tank fuel module that is included. The billet module is equipped with -6AN o-ring boss fittings and a cut-to-fit bracket that fits tanks from 6 to 15 inches deep. The 340 lph fuel pump is able to be used with gasoline, E85, methanol, ethanol, or alcohol based fuels. Go Fuel includes 2 different size filter socks, seals, hardware, and terminals.
Not Yet Reviewed
$1,554.99
—
$1,575.99
These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.
( 119 )
$1,649.95
FiTech Go Port EFI standalone system Go Fuel in-tank pump fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's universal Go Fuel in-tank 340 lph pump module. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FitTech Go Fuel in-tank pump module can be used on tanks with a depth of 6 in. to 15 in. The billet top assembly is designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly, and the vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.
Not Yet Reviewed
$1,546.99
FiTech Go EFI 2x4 625 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are offered in two finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. * Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 4 )
$2,051.99
—
$2,112.99
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 22 )
$1,649.95
—
$1,899.95
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,849.95
—
$2,099.95
Summit Racing™ Max EFI LS 750 fuel injection systems are efficient, self-tuning kits for your LS engine. These multi-port systems combine an aluminum intake manifold available in two profiles and port sizes, transmission control, and either a 92 or 102mm billet aluminum throttle body. The systems are available in two finishes and are timing control and power added compatible. Fire up the performance of your LS engine with our Summit Racing™ Max EFI LS 750 fuel injection systems. Select the kit with the specs and finish desired for your LS-based engine. Features: * 4.4 in. color touch screen hand-held controller * Multi-port fuel rails * 55 lbs./hr. injectors * Plug-and-play wiring harness * Calibration module * Oxygen sensor * MAP sensor * Tall or short manifold profile * Cathedral or rectangle port * 92mm or 102mm diameter throttle body * Black or natural finish
Not Yet Reviewed
$1,999.99
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,849.95
—
$2,099.95
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,007.99
—
$2,109.99
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI long runner cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,093.99
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,093.99
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,093.99
If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system in-tank/Go-Spark fuel injection master kits package a gold or black Classic throttle body with a fuel cell single pump module for your high-pressure fuel needs and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go Fuel single fuel cell pump module is ideal for running a fuel cell or custom tank. It features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$1,691.99
FiTech Go EFI 4 PA 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info are included. The throttle bodies are offered in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,505.99
FiTech Retro LS TBI 650 hp system in-tank pump fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI with a Go Fuel single fuel cell pump module—an ideal solution to your high-pressure fuel needs. It features a billet top assembly machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. No return line is needed and the module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware.
Not Yet Reviewed
$2,136.99
FiTech Go EFI 4 PA 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info is included. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,706.99
—
$1,716.99
If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system in-tank/regulator/Go-Spark fuel injection master kits package a gold or black Classic throttle body with an in-tank pump module, a Tight Fit regulator with gauge, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish and fuel delivery system. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go Fuel Tight Fit single output regulator can be adjusted from 30 to 70 psi, will support up to 1,000 hp, and is crafted from billet aluminum with -6 ORB ports along with a vacuum/boost port and includes gauge. * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Choose either a 255 lph or 340 lph in-tank pump module. Both pumps can be used on tanks with a depth of 6 to 15 in., and each has a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.
Not Yet Reviewed
$1,671.99
If you prefer the restored or classic hot rod look, FiTech's Go EFI Classic Series should be your choice. You get the performance benefits of modern fuel injection, with the looks of a vintage carburetor--without the flooding, vapor lock, and cold start issues. And FiTech's master kits will also provide a fuel delivery option, allowing you to take your setup from carburetor to EFI all with one part number. FiTech Go EFI Classic 650 hp system regulated in-tank pump/Go-Spark fuel injection master kits package a gold or black Classic throttle body with a Go Fuel regulated in-tank pump module, and a Go-Spark CDI ignition for high-powered sparks that improve combustion and power output. Choose your preferred throttle body finish and fuel delivery system. Features: * Go EFI Classic throttle body features FiTech's advanced self-tuning fuel metering technology and will support engines rated up to 650 hp. Thanks to the dual bolt pattern, the throttle body will easily bolt onto most intake manifolds and throttle linkages. The ECU of the Classic Series is compact and easy to mount out of sight to maintain a restored engine compartment, but you'll notice the fuel injection benefits every time you turn the key! * Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Choose either a 255 lph or 340 lph Go Fuel in-tank regulated pump. Both offer a simplified approach to fuel delivery for fuel injected engines with their single line systems. They have a low-profile design, are suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in. and feature an -6 AN pressure port and a 4 Bar (58 psi) regulator.
Not Yet Reviewed
$1,580.99
—
$1,589.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
