Availability
Showing In Stock Items. Show All 36 Items.
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
FiTech replacement handheld controllers will get you back up and running quick when the worst happens. If you lose or break your controller you can be out of luck updating your tuning or diagnosing an issue with the fuel injection system, but FiTech has you covered with their replacement controllers. All controllers come with the correct firmwear for your fuel injection system.
( 18 )
$167.00
Bosch Motorsport electronic throttle bodies (ETBs) are designed to control the fresh air delivery of spark ignition engines in combination with an electronic throttle control (ETC) system. ETB applications with flex-fuel, CNG and LPG are permissible if injected in the air flow after the throttle body. A typical ETC system includes the following components: electronic throttle body, accelerator pedal module, and electronic control unit. Additional features of Bosch Motorsport electronic throttle bodies include: * Many bore diameters available * Opening direction: most are counterclockwise; select ETBs are clockwise * Two redundant sensors control the throttle position * All ETBs have an idle air position * Temperature range: -40 to 284 degrees F (-40 to 140 degrees C) * ETBs can be connected directly to control units with ETC functionality * Supply voltage: 6 to 16 V * Supply voltage sensor: 5 ± 0.2 V * Output signal I: 0 to 5 V for 0 to 90 degrees * Output signal II: 5 to 0 V for 0 to 90 degrees
( 23 )
$118.99
—
$176.99
On Sale
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$279.95
$251.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$249.95
—
$349.95
$192.95
—
$241.15
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$269.95
$113.35
—
$249.95
Summit Bucks
ACDelco fuel rails help restore factory performance to your ride. These multi-port fuel injector rails feature quality materials and designs to perfectly replace your malfunctioning OEM units. More than 80 models are available for fitment on vehicles from the 1990s and up. Distribute fuel to all injectors properly for better engine performance and reliable durability; order the rails recommended for your application.
( 11 )
$113.50
—
$260.99
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 396 )
$229.99
—
$279.99
On Sale
Holley Sniper 2 EFI throttle body system CAN hubs are cutting edge connectivity solutions designed to enhance your Sniper 2 EFI system's performance and monitoring capabilities. Featuring a high-speed USB laptop connector, each hub facilitates seamless tuning, configuration, and real-time data logging. Included is one M8 Sniper ECU connector for a robust and reliable connection to your engine control unit and three M8 display connectors, allowing for multiple displays to monitor critical engine metrics simultaneously. A USB-C is also included. Holley Sniper 2 EFI system CAN hubs feature a compact and durable design, ensuring they withstand harsh automotive environments, while fitting neatly within your vehicle's engine bay or dashboard. Additional features and benefits: * Enhanced visibility -- Monitor your engine's health and performance easily with multiple display support * Stable and reliable connection -- Direct integration with Sniper ECU ensures a stable and reliable connection * Easy installation -- Plug-and-play connectivity and user-friendly installation for those with limited technical expertise * Multiple display support -- Connect up to three displays simultaneously for a comprehensive view of critical performance metrics
( 1 )
$139.95
$125.95
MSD replacement oxygen sensors serve the fundamental purpose of providing accurate exhaust gas information to an engine control unit (ECU) or a data logger. For typical vehicle applications, this information allows the ECU to optimize the air-fuel mixture for maximum fuel efficiency and reduced emissions. For performance and racing applications, the MSD Wide-Band O2 sensor modules provide detailed air-fuel ratio data to the MSD Power Grid, which helps in custom fuel calibration and recording.
( 2 )
$158.95
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$219.00
Clearance
Restore proper engine function with Dorman throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Dorman throttle bodies offer durable, reliable performance that is essential to the operation of your engine.
( 16 )
$297.99
$115.50
—
$202.99
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$299.96
On Sale
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$133.99
$120.59
Ford Performance Parts 2015-17 Mustang GT350 throttle bodies are an original equipment replacement, these 87mm units will also finish your 5.0L engine's upgrade to the GT350 5.2L intake manifold. They include fasteners, and these larger, precision-manufactured GT350 throttle bodies will open up the airflow into your manifold, resulting in added power. Whether you're replacing or upgrading, the place to purchase the perfect power for your Mustang is Ford Performance Parts.
( 3 )
$192.99
On Sale
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$277.99
$105.29
—
$250.19
Unite stock fuel rails with FAST LSX manifolds using these convenient adapter kits. The fuel rail and injector kits come with injector spacers and O-rings, so you can utilize your OEM components and install FAST high-performing composite manifolds—to maximize potential while minimizing expense. Acclimate your injectors and rails to better performance with FAST adaptor kits for their LSX intakes.
( 2 )
$134.95
Cardone new throttle bodies are guaranteed to fit and function like the original, due to Cardone's proprietary engineering standards. Each replacement unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match the original equipment, ensuring accurate airflow in all driving conditions and peak engine performance. Order the model recommended for your vehicle.
( 6 )
$162.99
—
$215.50
Clearance
Cardone remanufactured throttle bodies use 100 percent computerized testing of motor, throttle position sensor, and articulation to ensure reliable and consistent performance. Each unit is disassembled and every component is inspected, remanufactured or replaced to ensure a durable, high-quality product. Specialized component cleaning processes prevent the throttle bore surface from being deformed—facilitating optimum airflow. For impeccable fit, function, and savings, order the Cardone remanufactured throttle body designed for your vehicle application.
( 16 )
$335.99
$111.50
—
$238.50
FuelTech Peak and Hold 4A/1A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The Peak and Hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with 1.5 to 3 ohms of impedance * 8 Bosch 160 lbs./h (1600cc) injectors (2 per channel) * 4 Siemens 83 lbs./h injectors * 4 MSD injectors (with 2 ohms impedance per injector) Contents of package: * 1 Peak and Hold 4A/1A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
( 1 )
$219.00
URO Parts offers their throttle bodies for a variety of European vehicles and engineers these factory-style replacements to match the original manufacturers' performance specifications. These units will accurately control airflow into the engine and help maintain proper air-to-fuel ratios for optimal gas mileage. Get the same fit, form, and function that you expect from original equipment with the URO Parts throttle body designed for your application.
Not Yet Reviewed
$145.99
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$144.64
Beck/Arnley offers throttle bodies for a wide range of vehicles, from the 1990s and up. These aluminum assemblies maintain the proper volume of airflow into your engine for optimum performance. These fuel injection units come complete with butterfly valve, motor, and necessary sensors (where needed). The replacements offer the same fit and function as your original equipment; order the model recommended for your vehicle.
Not Yet Reviewed
$150.99
—
$250.99
Holley Terminator Stealth 2x4 Primary Throttle Body Sub harnesses are EFI upgrade components for the Holley Terminator Stealth 4150. These units are made with premium components to ensure better reliability and performance for your ride. Harnesses plug-and-play design makes replacement a snap!
Not Yet Reviewed
$231.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
