Availability
Showing In Stock Items. Show All 56 Items.
These Edelbrock throttle body intake elbows are designed using the latest technology for unbeatable flow and performance. They adapt GM LS1, LS2, and Ford 5.0L based throttle bodies to EFI intake manifolds with a traditional square bore, 4150 type, mounting flange. Edelbrock throttle body intake elbows are available in standard or box-style configurations to fit a wide variety of engine and hood combinations. Cast from high-quality aluminum, the throttle body elbows feature several bore inlet sizes with your choice of natural or black powdercoated finishes.
( 14 )
$183.95
—
$248.95
These aluminum adapters allow the use of a Trick Flow® EFI intake manifold on 1994-95 5.0L Mustangs.
( 17 )
$111.99
—
$119.99
Standard Motor manifold actuators allow for control over the amount of air entering the manifold, providing improved engine performance. They restore proper variable intake manifold function, engine power, fuel economy, and drivability. Every model is designed with high-stress metal to prevent intake linkage failure. These replacement parts are engineered to meet or exceed OE performance. Order the model recommended for your vehicle.
( 1 )
$176.99
Summit Bucks
ACDelco GM Genuine Parts engine intake manifold covers are designed, engineered, and tested to rigorous standards—and are backed by General Motors. Made to fit your specific GM vehicle, these replacement air intake components are crafted from the highest-grade materials for correct fit, and dependable, long-lasting service. Make sure your engine breathes properly with ACDelco's selection of top-quality replacement air intake parts.
( 2 )
$177.99
FAST LSX high-flow billet fuel rails feature a larger internal diameter that is designed to dampen the pulses and provide increased fuel volume, ensuring that your fuel injectors never run dry. They are manufactured from high-strength billet aluminum and are red anodized for maximum durability. These fuel rails include aluminum black anodized -8 AN fittings and "super-seal" O-rings that are component-matched to maximize fuel distribution. Upgrade your fuel system while adding some horsepower with these FAST LSX high-flow billet fuel rails.
( 30 )
$248.95
—
$297.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$249.95
$149.95
—
$224.95
On Sale
Holley Sniper EFI fuel rails hit the mark every time--on time! It's not enough to shoot fuel to your injectors; the process must be consistent and precise for efficient engine performance. Holley Sniper kits will deliver the performance, and they feature billet aluminum rails with a black anodized finish and a laser-engraved Sniper logo. If your target is the optimum delivery of fuel, equip your manifold with Holley Sniper EFI fuel rail kits.
( 40 )
$212.95
$170.95
—
$212.95
Ford Performance Parts GT350 throttle body adapters are manufactured from billet aluminum and include fasteners. These adapters allow you to mount the GT350 87mm throttle body on the Mustang GT intake manifold.
( 1 )
$116.99
On Sale
Holley Sniper throttle body spacers provide additional clearance. Topping a Sniper EFI fabricated intake manifold with your stock throttle body may mean that a little more room is needed for proper operation. These spacers will do the trick. They can also be used with stock manifolds to provide additional horsepower and throttle response. Holley Sniper throttle body spacers are machined from billet aluminum (with different finishes) and include O-rings with hardware. Order the model recommended for your vehicle application.
Not Yet Reviewed
$113.95
Hybrid Racing K-Swap fuel rails are made from 6061 aluminum with T6 heat treatment—and feature a durable anodized finish with a laser-etched logo, ensuring that your engine bay looks fresh and your engine stays fed! Each rail includes a 1/8 in. NPT hole that allows you to mount a fuel pressure gauge directly to your fuel rail. This puts the fuel pressure gauge in a spot that's easily visible, so you don't have to poke around in the engine bay just to see if you have fuel pressure. All of the ports can accept a -8 ORB fitting in the inlet(s) and outlet, enabling you to run either -6 or -8 AN fuel lines. The other detail that should stand out is the option for plugging the side inlet and outlet to allow you to run your fuel line to a centrally located -8 ORB fitting. This is positioned so that the fuel line can pass between the middle two cylinder intake runners (depending on your intake manifold.) This is an excellent option for anyone looking to tuck their wires and lines. Additional notes: * These rails have been shown to mount to the PRB, RBC, and RBB intake manifolds without needing any modifications. Any aftermarket intake manifolds that share the same fuel rail mounting points as the PRB, RBC, or RBB should also accept this rail. * Available with a Dust Red or Dust Black finish * E85 compatible * What's included: -- (1) K-Series fuel rail -- (2) -8 ORB / -6 AN adapter fitting -- (2) -8 ORB plug -- (1) 1/8th NPT plug
Not Yet Reviewed
$174.79
On Sale
Holley EFI throttle body adapters are offered individually allowing you to select your components as you build your intake system. They work with a wide range of intake configurations and come in different sizes depending on your throttle body. Simplify the process of getting your intake system set up with Holley EFI throttle body adapters.
( 1 )
$199.95
—
$228.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$267.95
$241.15
Upgrade your air intake system with throttle body adapters from Granatelli Motor Sports to provide a smooth transition from the throttle body to the intake manifold for trouble-free operation. The adapters are precision machined from billet aluminum and include hardware to bolt adapter plate to the intake. Order the throttle body adapter designed for your application.
Not Yet Reviewed
$224.44
On Sale
These Professional Products fuel rails are offered in two kit styles. The Basic kits include the rails, mounting brackets, and mounting hardware, and in some kits, fittings. The Complete kits include those same parts plus a complete set of fittings, a fuel crossover hose, and where needed, a fuel pressure regulator. All kits have stainless steel screws, nuts, and washers, and where non-aluminum mounting brackets are used, they are made of stainless steel as well.
Not Yet Reviewed
$163.99
$147.59
FAST fuel rails deliver the fuel! Their rails are machined from 6005A-T5 aluminum and feature a large, 11/16 in. inside diameter for consistent pressure at each fuel injector. Offered in several lengths, FAST fuel rails are black anodized to help to promote heat dissipation and prevent oxidation.
( 7 )
$234.95
—
$245.95
On Sale
Designed to deliver more horsepower and torque, aFe Silver Bullet throttle body spacers make an excellent addition to your vehicle. They're precision-machined from T-6061 billet aluminum to exacting specifications to provide optimal performance. The combination serrated/helix design creates turbulence so that the air/fuel charge is thoroughly mixed for a complete burn. Their specially-designed serrated edge will reduce the whistling sound normally associated with throttle body spacers. The aFe Silver Bullet throttle body spacers increase the volume between the throttle and cylinder, improving volumetric efficiency.
( 90 )
$137.00
—
$228.00
$123.30
—
$205.20
Summit Bucks
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 40 )
$108.99
—
$268.99
Summit Bucks
ACDelco GM Genuine Parts throttle bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. The throttle bodies are located on the intake manifold and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) Systems. Some of the key benefits that these throttle body components provide are better throttle response, increased airflow, and improved high rpm performance.
( 1 )
$144.99
On Sale
MSD Atomic EFI throttle position sensors are cable-driven mechanisms designed for LS throttle bodies—and they'll bolt to most aftermarket and factory intakes. These TPS/IAC kits are cast throttle body assemblies engineered to deliver consistent performance, utilizing the latest technology from high-quality materials for ultimate durability. MSD manufactures the fuel injection components to meet or exceed stringent industry standards.
( 3 )
$130.95
$117.85
BBK high-flow billet aluminum fuel rail kits are designed to work with stock injector angles and spacing. They work on stock or aftermarket intake manifolds, so you can get the same great performance and value that they deliver. Recommended for higher horsepower applications where larger fuel injectors are used, the BBK high-flow billet aluminum fuel rail kits will eliminate fuel pressure loss. The kits include precision CNC-machined billet aluminum fuel rails, mounting hardware, brackets, and hose connectors.
( 24 )
$269.99
Summit Bucks
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$112.99
—
$236.99
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 31 )
$117.95
$106.15
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$224.95
Performance Design billet fuel rails will allow you to complete your fuel system without having to source your own fuel rail and confirm fitment. The fuel rails come with stainless steel mounting and are available in red or black anodized finishes. While these kits do include stainless steel mounting hardware, port fittings to feed or plug the rail ends will have to be sourced due to the variety of available customizations. You can forget about fitment issues with the Performance Design billet fuel rails when you order the model designed to fit your intake manifold. Select the application needed.
Not Yet Reviewed
$176.50
—
$219.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
