Availability
Showing In Stock Items. Show All 37 Items.
UREMCO remanufactured fuel injectors work like new! How so? United Remanufacturing uses the best quality cores and fully cleans the injector bodies, removing dirt, carbon deposits, and grease. Plus, they replace all O-rings, damaged pintles, and filter baskets. These fuel injectors are stringently monitored, inspected, and tested to ensure that they meet or exceed all OEM specifications for optimal performance. UREMCO builds fuel injectors to fit many makes and models, and each and every one ensures consistent spray patterns with dependability, wear resistance, and value. Replace your fuel injectors with like-new remanufactured fuel injectors from United Remanufacturing Company.
( 73 )
$27.99
—
$30.99
Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly. These valves are often referred to as idle air control or IAC valves (GM), automatic idle speed or AIS valves (DCX), and throttle air bypass solenoid or AIR valves (Ford). These idle air control valves are used on both throttle body and multi-port fuel injected engines to regulate idle speed. The IAC valves open a small bypass circuit that allows air to flow around the throttle. Increasing the volume of air that's allowed to bypass the throttle increases idle speed. The engine's computer controls the IAC valves, if idle speed is out of range, and commands the IAC valves to either increase or decrease the bypass airflow. Replace your vehicle's worn or malfunctioning idle air control valve with these reliable Standard Motor Products replacement IAC valves.
( 54 )
$32.99
—
$45.99
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$41.99
These Standard Motor throttle body injection tune-up kits include all of the necessary components to get your throttle body back up and running smoothly. These kits are made to meet or exceed OEM specifications and are available for a variety of applications.
( 43 )
$37.99
—
$42.99
Pacific Performance Engineering race fuel pressure relief valves are designed to replace the stock original. Machined from heat-treated stainless steel, these fittings help maintain fuel rail pressure during heavy engine load conditions. The PPE valves eliminate the potential low pressure DTC codes P1093 or P0087 (during power enrichment) caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 11 )
$22.49
—
$41.39
Chevrolet Performance fuel injector harness brackets are crafted from high-quality materials. You can depend on Chevrolet Performance for the service parts that you need.
( 4 )
$21.99
ACDelco GM Genuine Parts fuel injector O-ring and seal kits contain the necessary replacements to service a fuel injector. They help provide liquid-tight connections between the injector and related parts. These OE kits are GM-recommended for specific applications, manufactured to provide the performance, durability, and service life you expect from General Motors.
( 3 )
$22.99
—
$37.99
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$20.99
UREMCO fuel injector O-rings enable you to avoid leaks when replacing or servicing your fuel injectors. They're made from quality materials to resist high temperatures and chemical exposure for reliable, optimum performance. The O-rings are available for a variety of applications. The direct replacements meet or exceed OEM specifications—and are highly recommended whenever fuel injectors are swapped out. Order the model and quantity needed for your vehicle.
( 4 )
$23.99
—
$24.99
ACDelco replacement fuel injectors help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for helping your vehicle run flawlessly. Replace any worn or faulty fuel injector with an OE-style model designed for your specific vehicle.
( 35 )
$47.99
—
$51.50
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series idle air control valves or IACs regulate the amount of air flowing to your engine. They offer high-quality materials to ensure durability and dependability. Choose the value and quality of Standard's T-Series to service your vehicle.
( 1 )
$22.99
Trans-Dapt Performance smooth bore TBI spacers improve plenum volume and air velocity for mild horsepower and torque gains. Trans-Dapt Performance Smooth Bore TBI spacers work best for tow vehicles or frequent wide-open throttle applications. Plus, they feature a non-whistle design. Trans-Dapt Performance Smooth Bore TBI spacers are made from durable aluminum, so you can count on them to keep your vehicle running efficiently.
( 12 )
$67.99
For drivers, determining actual ethanol content of E85 is essential to maximizing ignition timing, higher compression, and horsepower. Chevrolet Performance flex fuel sensor harnesses connect your GM sensor, which measures the ethanol-gasoline composition of the fuel used in your flexible fuel vehicle. In order to adjust the ignition timing and the fuel quantity to be injected, the engine management system requires the percentage of ethanol in the fuel. These electrical harnesses support a signal circuit which carries the ethanol percentage and changes the output signal accordingly.
( 1 )
$23.99
Replace failing pressure relief valves with BD Diesel fuel plugs! They're designed to easily replace a faulty stock relief valve, allowing you to maintain consistent rail pressure—and that makes them especially beneficial to higher horsepower engines! These fuel rail plugs will improve engine starting, and seal in up to 30,000 psi rail pressure to eliminate fuel pressure drops at full revs. The fuel plugs and are great for drivers seeking more power from their diesel. Order the replacement model designed for your application.
( 2 )
$44.95
ACDelco fuel rail O-ring kits are professional, premium aftermarket replacement parts. They're manufactured to meet expectations for fit, form, and function, providing the performance and dependability you expect from ACDelco.
( 8 )
$24.99
Clogged or leaking fuel injectors can have a ripple effect on your vehicle, decrease performance and economy. When it's time to remove a faulty injector, Bosch offers dozens of models designed as OE stock replacements. Choose the fuel injectors recommended for your gasoline or diesel application.
( 13 )
$38.99
Fleece Performance fuel injection wiring harnesses are offered for many different applications. Produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacements to get your truck or car back on the road quickly. Choose the wiring harness designed for your application.
( 2 )
$29.99
Summit Bucks
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$30.99
ATP offers accelerator cables for hundreds of applications. These replacement throttle cables meet or exceed OE standards and will keep you moving forward. They're one of the most inexpensive, yet necessary repairs you can make. Order the length and other options recommended for your specific vehicle and engine—or just match up the OEM part number.
( 202 )
$23.99
Trans-Dapt wide-open TBI spacers improve mid-to-high end torque. Their open design allows more air to enter the intake. The spacers work best for tow vehicles, or frequent wide-open throttle applications. Plus, they feature a non-whistle design.
( 5 )
$51.99
S&G Tool Aid fuel injection test adapter fittings are made to work with their fuel pressure tester kits to diagnose low fuel pressure, a faulty regulator, leaking injectors, clogged or damaged fuel filters, or fuel leaks. When your vehicle is not running right, the correct diagnostic tool can help to quickly find the source of the problem and help you avoid the added time and expense of tracking down the problem. These fuel injection tester adapters by S&G Aid can help you diagnose issues before they become a problem.
( 1 )
$50.99
These Volant Vortice throttle body spacers are designed to squeeze a little more performance out of your car or truck. These throttle body spacers are made of an extremely durable, glass-filled nylon composite that will not corrode or deteriorate due to the elements. Volant designed these throttle body spacers to work with either your factory air box or Volant's own cold air intake to provide quicker throttle response and, in most applications, improved fuel economy. Volant provides all of the mounting hardware and gaskets required for your application to make installing your Vortice throttle body spacers easy.
( 44 )
$71.90
Keep your fuel injectors in place with these Standard Motor fuel injector retaining brackets. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 6 )
$48.99
Bostech injector seal kits are tailored to specific vehicle applications, ensuring optimum sealing performance and durability that professionals have come to trust. These economical kits contain multiple O-rings for your particular engine to help maintain an air-tight seal. Any time you service the fuel injectors on your engine is a great time to replace those old rings. Order the kit recommended for your vehicle.
Not Yet Reviewed
$21.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
