Availability
Showing In Stock Items. Show All 22 Items.
These Edelbrock air horn gaskets will allow you to take off the top of your Edelbrock carburetor when changing jets or metering rods. They include five air horn gaskets so you can make multiple changes and use just one gasket kit.
( 17 )
$26.95
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. These kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--165, 170, 175, 180, 185, 190, 195, 200, 205, 210 * Air jets--.6, .7, .8, .9, 1.0, 1.1, 1.2, 1.3 * Pilot--.052, .055, .059, 0.63, blank
( 2 )
$143.59
AED's Pro-Series billet metering blocks feature totally tunable, screw-in, replaceable bleeds in all circuits. They feature a special-length circuit with five separate emulsion bleeds. If you're a serious tuner trying to fully maximize your combination, then these are a must! Billet blocks are available in two and three circuits with gas or alcohol. All billet metering blocks are machined from billet 6061 stock and anodized for appearance and protection.
( 1 )
$119.99
—
$127.99
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. The kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--410, 420, 430, 440, 450, 460, 470, 480, 490, 500 * Air jets--.5, .6, .7, .8, .9, 1.0, 1.1, 1.2 * Pilot--65, 70, 75, 80, 85
Not Yet Reviewed
$125.29
Available in matched pairs, or packed five per set, these gaskets are designed to fit Holley carburetor models. These gaskets are made from a rubber coated material designed to minimize swelling and withstand high underhood temperatures. Some carburetors within the same model series differ--check your particular carburetor to make sure you're getting the correct gaskets.
( 1 )
$16.63
Carburetor bowl plugs allow you to drain the fuel from the bowl for maintenance purposes. S&S Cycle bowl plugs are made from brass, available in packs of five, and offer leak-free performance.
Not Yet Reviewed
$10.95
S&S Cycle Series 72 main jets for S&S Super E and G carburetors are available in numerous sizes and can be purchased individually or in packs of five. These quality brass jets will efficiently supply fuel to the engine when the throttle is open. Select the size needed.
Not Yet Reviewed
$50.95
S&S Cycle idle mixture screws adjust the air-fuel mixture at idle speed to achieve the highest possible idle vacuum at the set idle speed. Made of brass, S&S idle mixture screws come in a package of five, so you can have some extra on hand.
Not Yet Reviewed
$60.95
Shafer's Classic Reproductions carburetor linkage kits include the rod with all rubber and plastic bushings, cotter keys, and carburetor turn spring. These components are designed especially for replacement use on select Tri-Five Chevy applications.
( 6 )
$34.99
Titan vacuum cap kits can provide a sure way to seal vacuum line connections on your carburetors, manifolds, etc., when the vacuum lines have been removed. These vacuum caps are constructed from durable, heat-resistant Buna-N rubber. They come in a range of sizes in a convenient, resealable plastic case to keep the vacuum caps organized. Kits contain: * (20) 3/16 in. * (20) 5/32 in. * (20) 7/32 in. * (10) 1/4 in. * (5) 5/16 in. * (5) 3/8 in.
( 59 )
$15.99
—
$19.99
Dorman vacuum caps are available in a variety of sizes, colors, and materials. These caps are designed to block off unused vacuum ports and lines, helping to avoid leaks and inadequate engine performance.
( 23 )
$3.99
—
$8.99
Holley vacuum line cap kits feature a selection of different sized vacuum tube caps. These caps are an indispensable addition to any professional tool kit.
( 13 )
$19.58
Performance Tool vacuum cap kits provide a quick and sure way to seal vacuum connections. Use them on carburetors, manifolds, or where various vacuum tube caps are needed. Cap lines and hoses while testing emission control systems, diaphragm, and much more. Performance Tools vacuum caps are constructed from durable and heat-resistant Nitrile rubber.
Not Yet Reviewed
$14.99
Wiseco offers carburetor jet kits for Keihin and Mikuni carburetors to allow tuning after an exhaust or other type of engine modification. These tuning kits will help improve mid-range throttle response and add additional fuel to wide-open throttle running conditions. The kits have multiple jets per size, a wide jet range, and separate kits for either main or pilot jets to provide you with endless tuning capabilities. Whether you're planning to play with your low-end or high-end by jetting your carburetor, Wiseco has the jet kit for you!
Not Yet Reviewed
$233.99
—
$282.99
Whether you're rejetting for altitude changes, adjusting for aftermarket modifications, or optimizing your bike's fuel-air ratio, Pro-X main jets deliver precision sizing, consistent fuel metering, and race-proven reliability. With strict quality control and precision machining, these jets eliminate bogging, improve fuel efficiency, and enhance overall engine responsiveness, making them the go-to choice for racers, mechanics, and performance enthusiasts seeking peak power and throttle precision. Pro-X Racing Mikuni main jets will fit many Mikuni carburetors, like Mikuni VM Roundslide and TMX, RS carbs, and they offer a wide range of jets for 4/042, N100.604, N102/221 and VM11/22 Series Mikuni carburetors. Pro-X main jets are manufactured in Japan to exact OEM specifications and are offered as a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$255.99
Whether you're rejetting for altitude changes, optimizing your air-fuel ratio, or upgrading for better performance, Pro-X pilot jets offer precise sizing, uniform flow rates, and race-proven reliability. With strict quality control and precision machining, these jets eliminate hesitation, improve fuel efficiency, and ensure crisp throttle transitions, making them the perfect choice for riders, mechanics, and tuners looking to maximize engine performance. Pro-X Racing Mikuni pilot jets will fit many Mikuni carburetors, like Mikuni VM Roundslide and TMX, RS carbs, and they offer a wide range of jets for M28/1001, N224.103 and VM22/210 Series carburetors. Pro-X pilot jets are manufactured in Japan to exact OEM specifications and are offered as a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor for altitude changes, aftermarket modifications, and peak performance tuning using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$305.99
Whether you're rejetting for altitude changes, optimizing your air-fuel ratio, or upgrading for better performance, Pro-X pilot jets offer precise sizing, uniform flow rates, and race-proven reliability. With strict quality control and precision machining, these jets eliminate hesitation, improve fuel efficiency, and ensure crisp throttle transitions, making them the perfect choice for riders, mechanics, and tuners looking to maximize engine performance. Pro-X Racing Keihin pilot jets will fit many Keihin carburetors, like PJ, PWK, PWM, some smoothbore carbs, etc. Pro-X offers a wide range of jets for N424-21, N424-26, N424-74C Series. Pro-X pilot jets are manufactured in Japan to exact OEM specification and are a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor for altitude changes, aftermarket modifications, and peak performance tuning using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$246.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
