Availability
Showing In Stock Items. Show All 62 Items.
Briggs and Stratton Walbro PZ22 carburetors will get your engine running again. They are quality replacements that offer the perfect fit and function for your Briggs and Stratton 206 or Animal engines.
( 3 )
$146.99
Mikuni VM series carburetors are the most popular high performance single carburetors in the sport of motorcycling. These time and track-tested carburetors have proven themselves on all terrains and in all conditions. They boast a large selection of bore sizes for an increased fuel mixture flow to match your engine modifications. The Mikuni VM series carburetors also offer you a plethora of tuning components to allow for precise fuel mixture metering for any application. It's time to go with a winner--install Mikuni VM series carburetors on your bikes and leave the world behind you.
( 34 )
$156.99
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.90
—
$190.95
On Sale
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$799.95
$628.95
—
$899.95
On Sale
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 81 )
$1,049.95
$808.95
—
$949.95
The carburetor gurus at Holley built these carbs with off-roading in mind. Features include maximum low-end torque and horsepower output, steep angle idle, spring-loaded needles and seats, four vacuum ports, and off-road vacuum secondaries. Their one-piece fuel bowl vent tube eliminates fuel spillover during extreme maneuvers, and their unique metering block provides flood-free operation. You'll have exceptional fuel control over rough terrain with the Holley Truck Avenger carburetor best suited for your off-road needs. Other product features include: * Aluminum-construction models available * Gold dichromate finish * Single-feed fuel inlet for ease of installation * Factory, preset electric choke for effortless startups or manual (cable-driven, hand-operated) choke for precise cold start control (depending on application) * Compatible with GM, Chrysler, and Ford A/T kickdown linkage (additional parts may be required) * 100 percent wet-flow tested assuring it arrives ready-to-run
( 15 )
$799.95
Holley Marine carburetors are designed to meet Coast Guard specifications. Each carburetor's fuel metering system is calibrated to compensate for unique engine loads found on boats and feature J-style vent tubes to direct fuel/fumes back into the carburetor for safe operation while on rough waters. Choose from a large selection with different options, such as single or dual feed fuel inlets, vacuum or mechanical secondaries, and universal or engine specific calibration. Features: * Gold Dichromate finish for corrosion resistance and a classic Holley look * Factory preset electric choke for easy startups * Power valve blow-out protection * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 1 )
$679.95
Replace your sloppy factory non-adjustable throttle linkage with a Summit Racing™ adjustable throttle linkage rod. Our kits connect the factory arm on your muscle car's pedal with the throttle lever on your carburetor. Built from billet aluminum and incorporated with 1/4 in. heim ends, the rods work with most every aftermarket carburetor, ensuring maximum throttle opening when using high-rise intake manifolds. Multiple versions available for different length applications. Select the one needed for your application. Features: * Universal (fits Holley, Edelbrock, Carter, QuickFuel, Summit, etc. carbs) * Fits throttle levers with 1/2 in. hole * Adjustable to fit 6 to 9in. or 9 to 12in. lengths * Billet adjuster 1/4 in.-28 right and left hand heim joints
( 2 )
$39.99
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many Ford, Chrysler, Dodge, and Plymouth vehicles.
( 124 )
$18.95
—
$40.95
On Sale
JET Rochester 2G Stage 1 carburetors are perfect for use in Circle Track racing. JET begins with a .130 in. needle and seat assembly for adequate fuel supply, and a small diameter float for maximum float blow volume. The cluster is then modified, based on engine and vehicle specs, to keep the fuel curve correct throughout the rpm range. Idle, transition, and accelerator pump circuits are modified for each specific application. The 2Gs are then tapped to accept Holley jets for ease of tuning, and finished with a 3/8 in. fuel inlet. Only the highest quality components are used throughout the assembly process as the 2Gs are returned to factory color and condition.
( 14 )
$399.95
$359.96
On Sale
The JET Streetmaster Quadrajet Stage 1 carburetors start with a complete disassembly of the hand selected core, cleaning and inspection procedure. The casting plugs are sealed with epoxy to prevent leak-down into the intake manifold. All circuits are checked for proper sizing and the calibration is checked for proper jets, primary metering rods and secondary metering rods. The carburetor is then carefully reassembled using the highest quality components with a new float, choke pull-off and bronze brushed throttle shafts. Stage 1 Quadrajet carburetors are intended to restore factory stock performance. Not intended for engines with RV or performance type cams.
( 38 )
$499.95
$449.96
You thought it couldn't get better, but it did! S&S Cycle Super E carburetors have four fuel delivery ports for better throttle response, and a smoother transition from the low/intermediate system to the main jet. They've also added an O-ring seal around the idle mixture screw to eliminate the possibility of air leakage and to help prevent the screw from vibrating out of adjustment. Super E carburetors feature adjustable accelerator pumps and special variable-position enrichment systems for quick throttle response and easy starting. These "super" carburetors are direct replacements and use your factory dual cable system for safe operation. The carbs are available in standard and shorty models. Get increased airflow for more power with S&S Cycle Super E carburetors.
Not Yet Reviewed
$499.95
Pioneer throttle cables are designed to replace your damaged or worn-out OEM throttle cable. They're made from quality materials and have the factory ends installed for a direct fit. These cables are available in a variety of configurations to fit your specific engine and transmission applications.
( 68 )
$16.99
—
$108.99
On Sale
TH-700-R4 transmissions are controlled by an adjustable throttle valve (TV) cable that attaches to the carburetor or injector linkage with a special bracket. The cable regulates internal line pressure, shift points, and downshifts, so proper installation and adjustment is critical. These JET TV cable brackets fit most popular carburetors and TBI units for TH-700-R4 Conversions. These brackets are designed to work with GM factory cables.
( 22 )
$59.96
$53.96
Faulty accelerator cables can lead to acceleration problems and be a safety hazard. If your cable is frayed or corroded, replace it with an OER accelerator cable! These high-quality replacement cables are reproductions of the factory cables, so you can be assured of proper fit and throttle operation.
( 38 )
$27.99
—
$59.99
Summit Bucks
ACDelco accelerator cables are replacements for specific vehicle applications. These OE-style accelerator cables will provide the same performance, durability, and service life as your factory original.
( 3 )
$44.99
Do you need a replacement carburetor for your classic Jeep? OMIX-ADA has what you need! These carburetors are designed to be correct replacements for the factory units. They're made with the highest quality materials to ensure excellent performance. Whether you're doing a restoration or a repair, you can count on OMIX-ADA for the right parts for the job!
( 42 )
$159.99
—
$786.99
CA offers carburetor accelerator cables for a variety of applications, including many Ford Mustangs from the 1960s and '70s and Chevy Corvettes from the 1960s, '70s, and '80s. These replacement throttle cables have a vinyl jacket and include end fittings. They're made in accordance with factory specifications to ensure proper fitment and performance. The cables are designed to meet or exceed OEM standards. Order the length recommended for your vehicle.
Not Yet Reviewed
$38.99
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle bracket is mounted to the intake.
( 21 )
$24.95
—
$31.95
These high-quality OER accelerator throttle rods are excellent reproductions of the factory throttle rods on your ride. OER accelerator throttle pedal rods connect between the throttle arm and the accelerator pedal.
( 18 )
$15.99
—
$34.79
Holley carburetor fuel transfer tubes will replace your factory transfer tube without any modification. They are made of aluminum, feature a natural finish.
( 12 )
$18.18
Upgrading to an electric choke? Holley choke block-off plates are designed to seal off the factory choke position on the intake manifold of small block Chevy engines. They're manufactured from aluminum and include mounting hardware for an easy installation. Install your new carburetor with an electric choke and block-off the OEM model with one of these Holley choke block-off plates.
( 13 )
$20.99
Experience the new-and-improved S&S Cycle Super G carburetors! With a huge 2 1/16 in. bore and four fuel delivery ports instead of three, your bike is set for high performance on the street. Super G carbs serve up the benefits of better throttle response, along with a smoother transition from the low/intermediate system to the main jet. S&S added an O-ring seal around the idle mixture screw to eliminate the possibility of air leakage and to help prevent the screw from vibrating out of adjustment. Rounding out each package is an adjustable accelerator pump, special variable-position enrichment system, and the ability to use your factory dual cable system for safe operation.
Not Yet Reviewed
$499.95
RESTOPARTS® Manufactured throttle cable brackets are designed to hold the factory throttle cable and return spring. They're made from quality materials and install in the stock location for a direct fit. The brackets are available in different models to correspond with your carburetor application.
( 3 )
$25.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
