Availability
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Airaid modular intake tubes optimize airflow to the engine by replacing inefficient originals. Factory tubes often have accordion-shaped walls, sound-canceling baffles, and undersized tube diameters that hurt airflow. The Airaid modular intake tubes help straighten and improve airflow to the engine, while also offering the best location for your mass air sensor. This design provides better throttle response, additional horsepower, and better fuel economy. These tubes are constructed from cross-linked, high-density polyethylene for strength and resistance to heat transfer. Airaid modular intake tubes are direct replacements for factory models, accommodating all sensors and fittings that attach to the factory tube. These tubes also work with the factory throttle body and intake box, and they include all necessary couplers and clamps for installation.
( 169 )
$153.99
—
$289.99
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 59 )
$349.00
—
$699.00
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$268.00
—
$729.00
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$549.95
$202.95
—
$599.95
Summit Bucks
Cold Air Inductions intake systems have a simple goal--maximizing your vehicle's performance by keeping your intake air as cool as possible! First, every CAI intake is specifically designed and engineered for the vehicle it is sold for, resulting in maximum performance, an easy install, and a perfect fit. Next, their intakes are made of high-quality aluminum--not heat-absorbing plastic. Their intake tubes have a ceramic coating both inside and out to reduce heat soak, as well as to keep radiant heat from penetrating the intake air. And they've applied 3/8 in. thermal insulation inside the air box to prevent heat transfer from the engine bay. Each cold air intake is TIG-welded by hand and powdercoated, plus the air box lids feature a clear viewing window for easier filter inspection. What should a high performance cold air intake system look like? Just like Cold Air Inductions intake systems! Additional features include: * High performance lifetime air filters provide protection with minimal airflow restriction * Black couplers and elbows made from 4 or 5-ply silicone rubber for durability * Entire system meets OEM standards and requirements * Stainless steel clamps and fasteners * Direct replacements for factory air intakes--no tuning required * Everything needed for installation is included * Many systems are available with your choice of near-chrome or textured black powdercoat * Most systems are direct replacements for the OEM air box--no modifications required and the OEM washer bottle is retained in the stock location
( 178 )
$299.99
—
$399.99
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 461 )
$1,049.99
$261.50
—
$999.99
Do you want an easy way to improve your engine torque and increase horsepower? These open element air intakes by Volant Performance can help! Feature's include a MaxFlow 5 oiled cotton gauze air filter, an open element filter box, and a larger intake duct to give the engine a less restrictive air passage to breathe through. These intakes are designed with larger diameters, unique bends, and smooth transitions to offer maximum horsepower and awesome throttle response. Additional features include: * Volant cross-link sculptured polyethylene air ducts * Volant cross-link polyethylene heat shield is designed to deflect a large percentage of engine heat * Volant MaxFlow 5 oiled air filter is a cleanable, reusable, high-grade cotton gauze filter media that reduces air restriction and increases engine output * High performance silicone connectors provide flexibility while maintaining strength and thermal stability * Marine-grade stainless steel clamps allow for optimal performance
( 27 )
$299.90
—
$418.90
BBK cold air induction systems are a quick and easy way to gain an additional 10-14 hp! These kits feature a long-lasting conical air filter and an unmatched high-flow design for superior performance and striking good looks. The tubes are available in steel and aluminum, with a half-dozen finish options. Order the model designed for your vehicle and engine application. Don't just take our word for it—BBK Cold Air Induction Systems can be found under the hoods of thousands of cars from coast to coast.
( 45 )
$279.99
—
$449.99
aFe Momentum HD Pro 10R air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro 10R intakes are designed around massive, 1,000 cfm, 360 degree, radial-flow air filters with ten layers of progressive cotton media providing 99.59 percent cumulative efficiency (independently tested). Their unique air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help to prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style * Patent pending air filter-to-housing interface design
( 6 )
$420.00
—
$475.00
Halltech Killer Bee MF108 cold air intake kits are world champion induction systems for your C6 Corvette that require no additional tuning. These systems include the Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and the systems feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed Killer Bee induction systems also feature strong and durable XLPE poly construction, offered in black or red to complement your red fuel rail covers. They come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 1 )
$619.99
Keep your UTV's air filter clean and engine protected with S&B Filters Powersports Particle Separators. A UTV's filter can clog quickly, robbing the engine of power. The S&B Powersports Particle Separators are a game changer—allowing UTV owners to maintain horsepower and torque by keeping their air filters cleaner for a much longer period of time. S&B designed this system large enough so that there is no loss in power when used with the factory filter system. By using the same technology military helicopters use to maintain power in extremely dusty conditions, S&B's Powersports Particle Separators remove 94 percent of dust from the airflow before it even reaches the stock filter. This dramatically extends the lifespan of your UTV's air filter, so you can maintain horsepower and torque for a much longer period of time. Don't let the elements get you down. Maintain power throughout you ride ... go further and go faster with the Powersports Particle Separators from S&B Filters! Product features and benefits: * Running the S&B Particle Separator is less restrictive than running without one—there is no loss of horsepower because your filter is not getting bogged down with dirt and debris, resulting in less restriction and maximum airflow * S&B Particle Separator removes 94 percent of dust from the airflow before it reaches your air filter to dramatically extend the life of your filter—this saves you time and money from constantly having to replace your air filter * Clean air is directed to your air filter while the scavenge fan ejects dust through exhaust * Centrifugal force spins the dust against the outer wall—clean air continues forward * S&B Powersports Particle Separator is designed to protect from water, snow, sand and fine dust to maintain power throughout your ride—just what a race-tuned UTV needs to finish faster with more power * Whisper quiet fan technology—when you're at idle or the vehicle's rpm is low, the fan speed is lower allowing you to talk and listen to music without hearing the fan; once you hit the gas, the scavenge fan instantaneously accelerates to provide maximum protection for your filter—it's the best of both worlds! * The Particle Separator's versatile billet clamps allow it to be installed in many positions on either the upper or lower roll bars of your UTV and accommodates most roof configurations * The Particle Separator integrates into the body of UTV Pro XP models for a factory fit and finish while allowing clearance for up to 40 in. tires, so you can say yes to all those other cool accessories while still protecting your engine * When installed on the upper roll bar, the Particle Separator allows your UTV to engulf more air—with this additional airflow, your engine will maintain its highest level of performance in horsepower and fuel economy
Not Yet Reviewed
$499.99
Injen Technology introduces their turbo inlet pipe for Volkswagen and Audi vehicles equipped with the Gen 3 1.8L / 2.0L turbo engines and the Volkswagen MK7 and Audi 8V applications. The wide array of vehicle fitments is impressive for this one part, so please check and confirm fitment before ordering. SES inlet pipes have a larger internal diameter to give your turbo free access to as much air as it can ever need. They're also designed with smooth airways to minimize turbulence and keep drag from fighting against your turbo's compressor. This simple change alone also increased the sound output of the turbo, giving you both tangible and audible performance gains. Injen has integrated the PCV inlet as well as the mounting arm into the unibody cast aluminum housing. From the 2-ply automotive grade silicon couplers to the stainless steel band clamps with an inner protective liner, all included hardware is designed to resist heat, pressure, fuel, and oil for years of service. Additional features: * Dyno proven gains of up to 14 hp and 11 lbs.-ft. of torque * Cast aluminum housing offers far superior durability over OEM plastic component * Provides faster turbo spool, increased responsiveness, and greater turbo sound output * Precision CNC-machined fittings for a superior seal and simple installation * Fully integrated CNC-machined PCV inlet provides an OE fitment and seal * 3 in. inlet OD minimizes turbulence and allows the maximum amount of air to reach the turbo * Note: Will only work with 3.00 in. tubing * 3 in. reinforced silicon automotive-grade coupler included for increased longevity * Fully integrated mounting bracket minimizes the chance of mounting hardware loosening over time * Fits directly in place of the OEM component, maximizing compatibility with other OEM and aftermarket components * Simple installation, no cutting or drilling required
Not Yet Reviewed
$146.54
aFe Momentum HD Pro Dry S air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro Dry S intakes are designed around massive Pro DRY S performance 360 degree, radial-flow air filters with three layers of progressive synthetic media providing 99.2 percent cumulative efficiency. Their unique, patent pending, air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$408.00
—
$499.00
aFe Rapid Induction Pro 5R air intake systems feature simple styling that achieves maximum power gains, maintains a perfect fit, and makes installation a snap. The massive air filter ensures your engine is breathing the cleanest, coldest air possible—and that equates to additional power. Upgrade your ride with an aFe Rapid Induction Pro 5R air intake system. Features include: * 18-gauge steel wrinkle black powdercoated heat shield snaps onto the lower half of factory air box * Custom high-temperature reinforced silicone elbow coupling is included for easy install * Pro 5R air filter— 5-layer progressively finer mesh cotton gauze with 100 percent polyurethane frame allows maximum performance and filtration * No cutting or drilling on factory parts for hassle-free install
( 2 )
$336.00
—
$927.00
Resurrected Classics is a one-stop destination for the Datsun parts you need to revive, repair, and restored your beloved vehicle back to its former glory. With a commitment to excellence, you can trust their genuine Datsun body parts to ensure a perfect fit and provide authentic restoration. Resurrected Classics 280Z AFM to throttle body hoses are available for 1979-83 turbo and non-turbo models. Hoses from the airflow meter to the throttle body are prone to failing due to age, causing running issues because of the additional air taken in through the cracks. Resurrected Classics rubber hoses replace the old, dry, cracked ones with an original fit and renewed performance of your Datsun. Select the AFM to throttle body hose designed for your car.
( 1 )
$59.99
Resurrected Classics is a one-stop destination for the Datsun parts you need to revive, repair, and restored your beloved vehicle back to its former glory. With a commitment to excellence, you can trust their genuine Datsun body parts to ensure a perfect fit and provide authentic restoration. Resurrected Classics 280Z air cleaner to AFM hoses are direct-fit replacements. Hoses from the air cleaner to the airflow meter were prone to failure due to age and cracks, leading to additional air coming in after the air filter. Resurrected Classics hoses replace the old, dry, cracked ones with an original fit and renewed performance of your Datsun.
Not Yet Reviewed
$59.99
Designed to be run with your Edelbrock E-Force Competition supercharger, these E-Force air intake systems can add additional horsepower to your vehicle--and who doesn't want more power? E-Force Competition air intake systems feature an open element style cold air system with an integral mass air meter, a cone-style air filter that can be cleaned, oiled, and reused, and a large molded plastic heat shield to block high temperatures and permit a rush of cool air into your supercharger! Kits are available for a variety of applications from 2005 and up.
( 1 )
$509.95
—
$676.95
aFe Rapid Induction Pro Dry S air intake systems feature simple styling that achieves maximum power gains, maintains a perfect fit, and makes installation a snap. The massive air filter ensures your engine is breathing the cleanest, coldest air possible—and that equates to additional power. Upgrade your ride with an aFe Rapid Induction Pro Dry S air intake system. Features include: * 18-gauge steel wrinkle black powdercoated heat shield snaps onto the lower half of factory air box * Custom high-temperature reinforced silicone elbow coupling is included for easy install * Pro Dry S air filter--3-layer oil-free synthetic media and requires no oil during maintenance * No cutting or drilling on factory parts for hassle-free install
Not Yet Reviewed
$350.00
—
$361.00
The aFe Takeda Stage 2 cold air intake systems produce up to 17 hp and 15 lbs.-ft. of torque over stock, while outflowing the factory intake by 21 percent. A one-piece powdercoated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Order the model recommended for your vehicle and engine application. Additional details: * A dyno-tuned intake tube is used to smoothly direct the airflow into the engine with minimal restriction * The use of factory mounting locations ensures a quality fit while maintaining a simple, hassle-free installation * A reinforced silicone coupling is used to connect the tube to the throttle body for strength and durability
Not Yet Reviewed
$361.00
—
$395.00
Air intakes and snorkels are crucial components for overland vehicles, providing significant benefits in terms of engine protection, performance, and reliability during off-road travel. With that said, S&B Filters offers snorkel intakes that are a highly recommended upgrade for your vehicle. The snorkels durable construction, improved performance, and added protection make them a valuable investment, especially for trucks, as they enable vehicles to cross deep water or dusty trails without the risk of engine damage or failure. By raising the air intake above the vehicle's roofline, a snorkel can prevent water, dust, or other debris from entering the engine's air intake system. Not only does the S&B snorkel improve performance, but it also enhances the appearance of your vehicle with a sleek and modern design that seamlessly integrates with the vehicle's body, giving it a rugged and adventurous look. These S&B snorkels include a clear, polycarbonate cover that not only protects the air filter but also adds a unique touch to the overall design. Whether you're tackling tough terrain, or simply looking to improve your vehicle's performance, these snorkel intakes by S&B will make a great addition to your vehicle.
Not Yet Reviewed
$349.00
Stillen offers a wide range of performance parts for a variety of vehicle makes and models, including the Trupower air intake kits. The Trupower air intake kits are designed to increase the airflow coming into the engine while also dramatically reducing air intake temperatures. Trupower air intake systems by Stillen feature a replacement radiator shroud and intake duct that brings cold air from the front of the vehicle through the truck's core support and into a large airbox. This innovative design takes advantage of the vehicle's factory air intake opening while also adding more airflow through the true cold air intake port. In addition to a significant reduction in air temperature, the Trupower cold air intakes by Stillen increases horsepower and torque. Made from high-quality materials, each kit is designed to be easy to install, often without requiring any modifications. Some kits may include a block off plate, free-flow tube system and/or a straight or free-flow coupler, depending on your application needs. Order the kit designed for your application needs. Upgrading your vehicle's air intake can provide several benefits, including: *Achieves ambient air temperatures faster than any other intake on the market * Achieves ambient air temperatures 60 seconds faster than factory air intake * Achieved 20+ hp increase +20 Torque increase—horsepower will vary per vehicle * Easy installation- no cutting/modifications required * High-quality Stillen air filter
Not Yet Reviewed
$406.84
—
$448.04
Snorkels are for more than just deep water crossings where they keep water from making its way through your air box and into your engine. ARB Safari snorkel systems relocate your engine's air intake point from the relatively low and vulnerable position under the hood to a much higher and safer location where a constant source of cool, clean, dry air is available. Safari snorkels use CAD software to create a unique design with absolute precision for seamless integration onto specific vehicles. They are custom-molded from premium quality polyethylene to be incredibly resilient and UV stable. Install one before your next trip and breathe easier knowing that your engine is protected by an ARB Safari snorkel. Additional features include: * UV-stable, cross-linked polyethylene body for the ultimate in strength * High-flow air ducting and body ensures air supply in excess of engine requirements * Each component is designed for maximum dust and water sealing * Stainless steel and plated hardware for corrosion resistance * Fully compatible with optional precleaners (some models) * Unique evacuation system effectively disperses rain and moisture * Completely-Australian designed and manufactured
( 1 )
$399.95
—
$749.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
