Availability
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
Banks Power knows that sometimes it's good to be dense. Cold air is denser air, and more density equals more performance. Enter the Ram-Air intake systems—the proven cold air intakes. Banks designed these systems to flow larger amounts of cold, dense air to your engine for greater power and fuel economy. Ram-Air units are enclosed to keep hot, power-robbing engine air out, while they inhale big gulps of fresh air through large, unrestrictive components to feed your hungry engine's appetite. And, no matter if you own a diesel or gas pickup, gas motorhome, or even a Jeep, these systems will keep your engine happy and efficient. Performance stems from more than just airflow—density is the key performer. Order the Banks Ram-Air intake system tailored to your vehicle application.
( 118 )
$165.00
—
$509.00
DC Sports short ram air intake systems improve your engine's breathing and offer it a blast of fresh power! These systems are an economical way to feed your engine cleaner air—and more of it! DC's aluminum intake tubes are corrosion-resistant, and the systems include washable, no-oil, no-rubber air filters. There's zero chance of MAF sensor contamination that would result in a loss of power and higher fuel consumption. The complete short ram systems are direct bolt-ons and weigh less than half of your OE setup. For a more efficient engine, order the DC Sports short ram air intake system designed for your vehicle application.
( 8 )
$142.49
—
$284.99
BTR Trinity Series cold air tube kits are accessories that make installation even easier, while maximizing the performance of your BTR Trinity Truck intake! The high-flow inlet tube connects your intake to the OEM airbox on specified trucks and SUVs. The kits come with everything needed to connect the valve cover PCV vents, including stainless steel clamps and silicone couplers. Effectively feed your horsepower with BTR Trinity cold air tube kits.
( 1 )
$174.95
S&B Filters air scoops provide an enormous mouthpiece that feeds cooler, denser air to your engine for better performance. These durable units help lower your vehicle's exhaust gas temperature (EGT)—and pressurize the intake air box with cool air from outside the engine compartment while driving. S&B air scoops are water ingestion tested and designed to expel water and snow. They're available in a variety of configurations for proper fitment on numerous makes and models. Breathe easy, your engine and warranty are protected.
( 1 )
$99.00
—
$129.00
aFe Magnum Force Pro Dry S Stage 2 Si air intake systems feed your engine clean, cool air—and lots of it! These systems feature fully sealed intake housings that keep out warm air under the hood and bring in cooler outside air for a denser intake charge. They're fitted with a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency and maximum performance, while lowering intake air temperatures. And, keeping the air clean is the patented 360 degree Pro Dry S performance cone filter. With three layers of fine mesh synthetic oil-free media and polyurethane construction, these conical filters will last a long time and through multiple cleaning cycles. Assembly and installation are easy, as these systems use factory mounting points. Flow maximum oxygen to your engine with these Magnum Force Pro Dry S Stage 2 Si air intake systems from aFe.
( 3 )
$350.00
—
$836.00
On Sale
COBB Tuning SF Air Boxes add the benefits of a cold air intake to the outstanding performance of COBB SF Intakes. These air boxes enclose the SF Intake so hot engine bay air that robs horsepower is prevented from entering the intake system. Their unique design also separates rainwater from the intake air, eliminating the water ingestion issues that plague in-fender cold air intakes. Features of COBB Tuning SF Air Boxes: * Available for a variety of makes and models * 16-gauge aluminum construction * Powdercoated finish * Riveted COBB nameplate * Where possible, OE snorkel feeds cold air to the air box * Stainless steel hardware * OEM-quality fit and finish
Not Yet Reviewed
$205.00
—
$325.00
$184.50
—
$292.50
Feed fresh air to your headgear with an S&B Filters helmet particle separator hose kit. These durable corrugated hoses are available in three lengths to ensure a comfortable fit. For any racer or off-road adventurer, the driver air system is vital in supplying fresh, clean air to breathe during the ride. Eliminating dust and contaminants is the job of S&B.
Not Yet Reviewed
$20.00
aFe Magnum Force Stage 2 Si Pro 5R intake systems are CAD-designed and sealed for maximum power. These systems are fully enclosed in a heat-shielding molded plastic housing that features an auxiliary inlet duct for better airflow, plus an attractive brushed aluminum cover. Also featured is aFe's heat-insulating molded plastic tube that replaces your stock intake tract. These specially designed tubes flow more air with improved volumetric efficiency for maximum performance. Keeping the air clean are the deep open pleats of their Pro 5R washable and reusable oiled filters constructed of high-quality materials. These systems install easily without drilling or cutting. Bolt on a better way to feed your engine clean air with aFe Magnum Force Stage 2 Si Pro 5R intake systems.
( 5 )
$361.00
—
$808.00
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$349.95
—
$2,399.95
VaraRam VR-SS Super Street Camaro Ram Air systems outflow, outrun, and outperform to deliver tire-smoking airflow to your modern muscle machine! These intake kits surpass OEM requirements with VaraRam's special high-flow air-horn/MAF design located directly in front of the throttle body—offering maximum aerodynamic efficiency and airflow. Also added are an elliptical neck and rifled barrel design, plus a front wing with several vortex generators for phenomenal flow balance, equalized velocities, and superior overall airflow efficiency, even in the most extreme conditions! VR-SS Super Street systems take your Gen5 Camaro (mild or wild) to an unbeatable level. Models are available in no-tune (check the factory code on the OEM air meter first) and tuned styles to gain maximum power. Whether you're a city or WOT driver, feed your muscle the coldest air possible for top performance—with a VaraRam VR-SS Super Street Camaro Ram Air system.
( 13 )
$370.99
—
$399.99
Halltech C6 Venom II cold air intake kits are direct replacements for the stock LS2 intake box, plus Halltech's design bolts on 15 RWHP/12 lb.-ft. of torque. Now with a larger 106.7mm inlet and built-in velocity stack, no other bolt on will make more power. The intake is made from the same mold as the Killer Bee II that dynoed +15 hp/+14lb.-ft. on the Katech Engine Development Superflow dyno. The same huge high-flow K&N Filter will flow over 1,250 cfm and will feed over 900 hp easily. Halltech C6 Venom II cold air intake kits use the stock wiring, and MAF sensor for direct bolt-on power that will not void your warranty. The Halltech Beehive is included, as well as their HC.125 honeycomb flow straightener. Please note: No tuning required. MAF sensor not included. Not CARB legal.
Not Yet Reviewed
$619.00
aFe Magnum Force Stage 2 XP cold air intake systems offer twice as much filtration. These dual air intake systems feature two large 3-layer oil-free Pro DRY S performance air filters to feed your hungry engine the cleanest air possible. And since these Magnum Force Stage 2 systems outflow factory intakes by as much as a whopping 44 percent, not only is your engine getting clean air, but a lot more of it! The aluminum black powdercoated one-piece heat shield was developed to utilize stock mounting locations to keep installation hassle-free. All clamps, couplings, and hardware are included with these direct bolt-on kits.
Not Yet Reviewed
$395.00
—
$408.00
Improved Racing VCM OTR intakes deliver cool over-the-radiator performance. They offer huge horsepower gains by maximizing air flow with a straight ram-air design and massive K&N filters. And because air is pulled in over the radiator, it also feeds much cooler air into your engine than other intakes, resulting in even more horsepower gains. VCM intakes are molded from OEM-quality plastic to present a factory look and feel under your hood. Improved Racing VCM OTR intakes also offer the options of MAF or MAF-less configurations depending on your preference and setup to help you get the most out of your engine--not only performance, but in most cases fuel economy as well. Note: MAF-less versions require a custom speed-density tune.
Not Yet Reviewed
$499.00
—
$519.00
Feed your ride the fresh, cold air it needs for greater power and savings at the pump! Airaid SynthaFlow Classic cold air intake kits are constructed with a mandrel-bent powdercoated inlet tube that moves the air inlet to an ideal location, optimizing airflow at the drop of the throttle. Their exclusive filter adapter increases your horsepower over the stock box by sending cold, dense air directly into the intake system. SynthaFlow Classic cold air intake kits improve your engine's efficiency and increase gas mileage. Their filters are manufactured with multiple layers of cotton gauze and synthetic materials that capture and hold power-robbing dirt and debris, while allowing clean air to pass through unrestricted. These washable and reusable oiled filters only require servicing every 30,000 to 50,000 miles, depending on the environment and vehicle use. Optimize the potential of your ride with an Airaid SynthaFlow Classic cold air intake kit!
( 2 )
$349.99
—
$399.99
Are you looking to set records and win races? With the help of VaraRam VR-SDR cold air intake systems, you can. These super-duty racing cold air induction systems nourish your engine with cool air, and we all know that more air equals more power. The people at VaraRam have completed intensive road and track testing to discover every possible ounce of power to make your racer zoom. These easy-to-install, better-breathing systems relieve "heat soak" from a sealed engine compartment. They relocate the MAF in front of the throttle body and the meter inside of the air box with the special filter. Then, they create a positive seal around the perimeter of the intake plenum chamber to force-feed your hungry high-horsepower machine. VaraRam VR-SDR cold air intake systems were compared to the rest and tested to be the best.
Not Yet Reviewed
$299.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
