Availability
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
The aFe Takeda Link Stage 2 Pro Dry S air intake systems is a true cold air intake that can be easily converted to a short ram air intake during wet seasons. In recent testing this intake produced impressive gains in both horsepower and torque over stock. aFe Takeda intakes are constructed out of lightweight clear-coat anodized aluminum tubing for maximum airflow and a great look under the hood. Each intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration, and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. aFe Takeda Link Stage 2 Pro Dry S air intake systems come complete with all tubing, filters, couplings and hardware for an easy installation.
( 1 )
$310.00
—
$372.00
Steeda boss intake upgrade kits are designed for converting your Steeda cold air intake for standard 5.0L Mustang to a Steeda Boss specific system for use with Boss intake manifolds. These Steeda boss intake upgrade kits include a larger 101mm replacement MAF housing, a larger intake tube specifically designed to be used with the Boss manifold, silicone sleeves, replacement hose clamps, and a template for modifying your head shield for the larger MAF housing. Due to the larger MAF size over your standard 5.0L GT cold air, specific tuning is required to use these parts. Tunes designed for the original MAF housing are not correct and must be updated. Benefits include: * Save money by converting your 5.0L GT cold air intake * Specifically designed for the Boss Mustang * Power increase across entire power band
Not Yet Reviewed
$234.95
Reinforce your Jeep Wrangler's engine performance and overall off-road capability by installing a Rugged Ridge AmFib low and high-mount snorkel system. Using these snorkels will give you bolder confidence to tackle the deep river crossings, where the water level might rise over the hood line and could make its way into your factory air box. AmFib low and high-mount snorkel systems come in a modular design that includes the low- and high-mount intakes, and they can durably handle the rigors that come with your Wrangler's rugged lifestyle. The snorkels feature a high-strength, premium ABS construction that is UV treated, weatherproof, and impact resistant. The modular configuration converts from low-mount intake to high-mount snorkel in minutes. Additionally, the OE-fit and innovative styling will blend well with your Jeep's factory trim. No cutting required to the exterior body parts for snorkel system installation.
( 1 )
$84.99
—
$899.99
APR turbo inlet pipe conversions include a full back tube and turbo inlet adapter to convert the GTI/A3 style system to one designed for the Continental turbocharger. The tubes feature a larger turbo inlet pipe at the turbo end, and a DV recirculation port for the throttle mounted diverter valve. These APR pipes can be used when upgrading to the Continental turbo, other hybrid, or direct replacement turbocharger systems that require a larger turbo inlet and a DV recirculation on the hose.
Not Yet Reviewed
$109.95
Remove your mass airflow sensor setup with Improved Racing VCM MAF delete kits. These kits convert your standard OTR intake to a less restrictive MAF-less setup. The kits include an IAT sensor, a harness extension, a coupler, and hose clamps to complete the process.
Not Yet Reviewed
$99.00
Rugged Ridge AmFib high-mount snorkels are all you need to convert the standard low-mount snorkel on your Wrangler JL or Gladiator GT to its maximum capability. Once installed, the AmFib snorkel and its components look "at home," as though they were part of the Jeep's original design. No cutting and very little modifications are required. Defy water crossings with total confidence, equipped with a high-mount snorkel from Rugged Ridge.
Not Yet Reviewed
$214.99
AMS Performance Alpha Black induction kits deliver accurate airflow metering to provide big power and perfect drivability. By changing the MAF location and converting the setup to a speed density system, AMS has eliminated the problems associated with running big power on traditional intake pipes. Smoother drivability and a higher peak horsepower threshold can be achieved while still using a 3 in. pipe, proving well over 1800 hp to date. The speed density conversion allows for much better measurement of the airflow that is entering the engine and allows you to run a BOV that will vent to atmosphere without the consequences of a standard MAF. Exclusive benefits: * Speed Density conversion improves drivability * More accurate metering of airflow for smoother part/throttle operation * Proven efficient to over 1400 hp * Cold air intake system for cooler air charge boosting power and response * Simple solution for changing blow-off valve via the threaded boss—no need to cut off and weld on flanges
Not Yet Reviewed
$2,279.95
High-capacity air cleaner housings are used to supply fresh air to an engine. Based on the popular open element air cleaner, HardDrive Chopped Ram-Air air cleaners are dedicated to attaining maximum performance from your motorcycle. These custom-made, tilt-forward air cleaners feature a 4.5 x 10 in. CNC billet aluminum housing in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Chopped Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® bikes.
Not Yet Reviewed
$296.96
—
$361.76
Are you looking to improve your bike engine's breathing capability by installing an open element air filter? HardDrive Coned Ram-Air air cleaners are custom-made, tilt-forward air cleaners. They feature a 4.5 x 12 in. CNC billet aluminum housing available in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coned Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® motorcycles.
Not Yet Reviewed
$316.76
—
$395.96
Are you looking to improve your bike engine's breathing capability by installing an open element air filter? Look no further than HardDrive Coriolis high performance air cleaners. They feature a cast aluminum housing available in black or chrome finish, along with high-flow air filters and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coriolis high performance air cleaners are available for a wide range of Harley-Davidson® motorcycles with the appropriate required adapter.
( 1 )
$183.56
Keep that sleeper look with Mikuni air box adapter kits. These kits adapt Mikuni HSR 42 carburetors to your original CV carburetor backing plate. Mikuni air box adapter kits come complete with adapter, adapter screws, and O-ring seal for the air box adapter.
( 1 )
$30.99
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$433.00
—
$447.00
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$2,199.95
$349.95
—
$1,978.95
On Sale
Dinan high-flow air intake systems consist of an injection-molded replacement lid for the stock air box—designed to increase overall volume and accommodate a high-flow filter element for optimum intake airflow. The lid is manufactured using a special composite material, specifically chosen for its ability to resist power-robbing underhood heat. The lid also incorporates an O-ring, completely sealing the air box for maximum pressurization and further insulation against heat-soaking—optimizing performance under varying driving conditions. They also include a secondary intake duct that scoops up additional cool, oxygen-rich air via the factory brake cooling duct, further improving performance as road speed increases.
Not Yet Reviewed
$1,699.95
$269.95
—
$1,528.95
Draw your vehicle's engine into the world of respiratory refinement with AWE Tuning intakes. AWE Tuning S-FLO air intakes are available in different styles for a variety of vehicles. With full carbon fiber construction or carbon fiber airboxes/covers with a 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube, the intakes are paired with AWE's S-FLO filters for easy service, increased airflow, and impressive power gains. All intakes provide seamless integration with your vehicle's air inlets. Choose the intake package designed for your vehicle.
Not Yet Reviewed
$285.00
—
$2,270.00
Dinan carbon fiber air intake tubes improve the look of your M3 engine. They are built with the highest quality components--beautiful carbon fiber connecting pipes and injection molded rubber boots. Dinan carbon fiber intake tubes are strictly cosmetic parts that give no power boost, but they do give your engine compartment a boost of elegant refinement to enjoy every time you pop the hood.
Not Yet Reviewed
$199.95
Rein Automotive OE quality engine air intake hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for your vehicle's factory original parts, these hoses are identical to the Original Equipment Manufacturers in fit, form, and function. Order the Rein engine air intake hoses designed to fit your application.
( 1 )
$14.99
URO Parts air intake hoses and boots are part of their extensive line of engine components designed to withstand the stress today's worsening traffic conditions place on an engine. URO's air intake hoses and boots are precisely engineered and manufactured using high-quality materials to endure high underhood temperatures, constant vibration, and repeated braking and acceleration. URO Parts continuous research and development enables them to be the first to supply many OE-replacement parts … at significant cost savings.
( 1 )
$102.99
On Sale
Injen SP Series Speed Pro intake systems are developed for enthusiasts who demand the best. These units feature Injen's patent-pending MR Technology process for optimal gains and a safe air/fuel ratio. Speed Pro Series models do not limit themselves to just cold air intake or Short Ram systems—the MR Technology process has its effects on both types. The Speed Pro Series are the world's first bolt-on tuned intake systems designed specifically for your vehicle. The aluminum tubes are available in a variety of finishes; and the blue synthetic filters prevent particles from contaminating the engine..Hundreds of configurations are available; order the intake tailored for your application.
( 22 )
$393.71
—
$460.05
$314.97
—
$368.04
On Sale
Injen PF Series Power-Flow intake systems are engineered to the highest standards, utilizing the latest technology available. Incorporating Injen's own patent-pending MR Technology, these cold air units are the world's first tuned intake systems on the market! They ensure the highest horsepower and torque gains within the safe factory air/fuel ratio limits. Power-Flow intakes deliver a blast of oxygen at the perfect moment for blazing combustion and gut-wrenching power output, placing your motor on a steady diet of colder, richer oxygen. The process starts with the high-flow air filter's integrated air inducer, air stabilizer, and velocity stack. Fresh air is drawn in, smoothed out, and then pressurized. From there, the oxygen flows through the Mega Ram-tuned pipe, where it's released to the mass airflow sensor at calculated intervals. Each kit goes through a rigorous dyno-testing process and is fine-tuned to unleash ferocious performance across the rpm spectrum. Injen Power-Flow intake systems bolt on without any drilling. Order the model designed for your vehicle application.
( 16 )
$438.65
$350.92
Draw your vehicle's engine into the world of respiratory refinement with AWE Tuning intakes. AWE Tuning AirGate air intakes are constructed of genuine 2 x 2 carbon fiber with a UV-stabilized resin and clearcoat, and they mount securely to the stock/factory location, integrating with the factory ducting/air inlets seamlessly. With AWE's AirGate you can run it with the lid on or off via easily accessible hex screws. Want to hear more turbo inductions sounds from within the cabin? Go lidless. Prefer to keep it stealthy? Simply bolt the AirGate lid in place. Complementing the carbon fiber airbox is AWE's durable and washable S-FLO filter designed to ensure easy service and maximized airflow, unlocking increased horsepower and torque gains, while delivering an intoxicating sound. AWE Tuning AirGate air intakes for the MQB platforms are available with or without lid. Choose the preferred AWE intake designed for your vehicle.
Not Yet Reviewed
$720.00
—
$1,030.00
URO Parts list of air intake components are direct pieces to replace originals parts that are no longer suitable to provide the proper function. Whether you need a boot or coupler to restore proper engine performance, URO components are molded and shaped to provide the proper fit and operation, as well as appearance, just like the originals they are replacing.
Not Yet Reviewed
$15.99
—
$33.99
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$447.00
—
$461.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
