Availability
Clearance
Roush 2012-14 F-150 EcoBoost 3.5L Phase 1 Performance Pacs combine their impressive cold air intake system with custom calibration for an entirely new level of power—increases up to 50 hp and 86 lbs.-ft. of torque. You'll love the improved throttle response and aggressive gear shifting, as well! The kits include a Roush Flash Voucher Card to be calibrated using the Roush Diagnostic Tool software. In addition, the injection-molded intakes are equipped with a 6 in. high-flow multi-layer cotton gauze filter that's washable; and all necessary hardware is supplied for an easy installation without cutting or drilling. These systems are designed to retain your lower stock intake box and reuse the factory MAP sensor. To ensure your satisfaction, the Performance Pacs are covered by a 3-year/36,000-mile Limited Powertrain Warranty. For real performance you can feel and hear, pump up your EcoBoost with Roush!
Not Yet Reviewed
$684.99
$412.50
On Sale
Roush 2015-17 Mustang 3.7L V6 Level 1 Performance Pacs are one of the easiest and most economical ways to achieve a power boost! These kits have been dyno-tested to add more than 12 hp and 13 lbs.-ft. of torque to your rear wheels. The industry-leading cold air intakes are designed to maximize the space in your engine bay. They're injection-molded units equipped with a high-flow, multi-layer filter—and the lower restriction rate means you'll never have to upgrade your intake. Level 1 Performance Pacs include calibrations engineered for aggressive throttle mapping, a sportier feel, and driving enhancements across the power band. These calibrations can be quickly programmed into your factory ECU using standard J2534 reflash interfaces and the accompanying Roush Diagnostic Tool utility. * An optional 3-year/36,000-mile Limited Powertrain Warranty is available.
Not Yet Reviewed
$760.99
$684.89
Your 6.2L LSA ZL1 is impressive. With Lingenfelter 630hp ZL1 engine packages, it will be very impressive! These upgrade packages enhance your supercharged engine with a substantial horsepower and torque improvement over the factory 580 hp and 556 ft./lb. of torque. And they do that while maintaining a safe level of boost and supercharger rpm. Packages include: * 2.55 in. diameter powdercoated 8-rib steel supercharger drive pulley * 8-rib serpentine belt * Lingenfelter LS9 solid supercharger isolator coupling * Lingenfelter high-flow air intake kit * 160 degree thermostat
Not Yet Reviewed
$848.30
Your 6.2L LSA CTS-V is impressive. Lingenfelter 630hp CTS-V engine packages will make it very impressive! These upgrade packages enhance your supercharged engine with a substantial horsepower and torque improvement over the factory 556 hp and 551 ft./lb. of torque. And they do that while maintaining a safe level of boost and supercharger rpm. Packages include: * 2.55 in. diameter powdercoated 8-rib steel supercharger drive pulley * 8-rib serpentine belt * Lingenfelter LS9 solid supercharger isolator coupling * Lingenfelter air intake duct * Air filter * 160 degree thermostat
Not Yet Reviewed
$759.95
Lingenfelter 650 hp ZL1 engine packages give you everything needed to upgrade your LSA Camaro ZL1 to the 650 hp package, except ECU programming which is available separately. Features include: * Lingenfelter high-flow Camaro ZL1 cold air intake LSA * Cadillac CTS-V Camaro ZL1 overdrive harmonic balancer kit * Cadillac CTS-V Camaro ZL1 5 percent overdrive balancer pulley * Lingenfelter CTS-V Camaro ZL1 LSA/LS9 10-bolt supercharger pulley hub * Lingenfelter CTS-V Camaro ZL1 LSA 2.55 8-rib 10-bolt pulley * Lingenfelter supercharger isolator coupling LS9/LSA engine * 8-rib poly V-belt for 5 percent overdrive pulley and 2.55 upper pulley 67.0 in. * Lingenfelter 160 degree thermostat * Bosch LS9 LSA 63 lb. fuel injectors
Not Yet Reviewed
$2,189.70
Instant Rebate
Traditionally, silicone couplers were the go-to solution for connecting charge tubing. With the advent of much higher horsepower turbo applications producing high amounts of boost pressure meant a more robust solution was needed, and the Vibrant HD Clamp was born. Making the best even better, there is a new generation of modular billet aluminum clamp systems—Vibrant HD Pinless clamp assemblies. Vibrant HD Pinless clamps are single units with an integrated clasp mechanism and a safety lock push-button, replacing the old quick-release pin. This clasp mechanism is very easy to use and delivers a significantly more secure connection, while the safety lock, which is always set in the locked position, provides an extra level of security to ensure the clamp never pops open unintentionally. Not only do you get a more robust connection, but you never again need to worry about a pin getting lost or malfunctioning due to debris buildup. As a bonus, the Pinless HD clamps provide the installer with positive feedback and an audible click when properly closed. The design is completely backwards compatible with any existing HD system and offer the strongest quick-release connection, while allowing a degree of flexibility to allow for engine movement. Vibrant HD clamp assemblies feature precision CNC-machined 6061 billet aluminum clamp with hard anodized finish, a pair of weld ferrules with specialized O-rings, and hard anodized union sleeve. They are available in a variety of sizes to suit any custom charge system. Choose the security, strength, and style of Pinless clamp assemblies for your high performance application.
( 2 )
$159.59
—
$235.59
Instant Rebate
Vibrant Performance aluminum tubing brings your engine compartment to life! Their mirror-polished T-6061 aluminum mandrel-bent U-bends, elbows, and straights help you to fabricate your own custom, lightweight intercooler plumbing and air intake assemblies. Vibrant offers their aluminum tubing in a variety of lengths and O.D. sizes—and they're easy to weld. Create a show under your hood with the selection of beautiful aluminum tubing from Vibrant Performance!
( 78 )
$31.34
—
$165.29
JLT cold air intakes are engineered to minimize air restriction and increase airflow far better than your stock system. The intake tube is roto-molded plastic with a huge filer opening for superior airflow and no heat soak like metal tubes. The air filter is custom-built for super smooth and fast airflow and has huge deep pleats for more surface area than filters that look much bigger. The ABS plastic heatshield blocks engine heat at idle and low speed. It uses a large area to make sure the filter has tons of cool air and uses the factory fresh air inlet from the bumper to keep temps cool. Improve your vehicles horsepower and performance with one of JLT's cold air intakes!
( 1 )
$179.00
—
$699.00
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 833 )
$214.99
$64.99
—
$269.99
Spectre Performance couplers are inexpensive but secure connections for your intake tubes and other components. Offered as couplers, reducers, elbows, and even ovals, these parts are available in several diameters to meet your application demands. Spectre also supplies couplers with inserts to adapt to MAF sensors. The various connectors are manufactured from materials such as rubber, plastic, silicone, PVC, and aluminum. Spectre Performance couplers are a good fit for your air intake and your wallet.
( 86 )
$16.99
—
$48.99
Spectre has a complete line of polished aluminum air intake tubing. Straight tubes, mandrel, and tight radius welded angles are available in a variety of diameters and sizes. Choose the style needed for your particular application.
( 110 )
$12.99
—
$136.99
Instant Rebate
Vibrant Performance offers a variety of tubing coupler components, including aluminum clamps and ferrules, rubber O-rings, and stainless steel pins. These heavy-duty replacement parts are available in different sizes, finishes, and quantities.
( 4 )
$5.98
—
$232.74
Instant Rebate
Vibrant Performance reinforced silicone couplers provide race-proven performance for high-temperature, high-boost applications! Constructed from hand-wrapped, 4-ply, high-grade silicone, these couplers feature superior temperature resistance rated for -65 degrees F to 500 degrees F. Vibrant Performance reinforced hose couplers are strong and reliable--they won't swell or burst under extreme conditions. Vibrant Performance offers these couplers in straight, transition, and hump styles in a variety of sizes and lengths to meet your fabrication needs.
( 145 )
$8.54
—
$192.38
JLT engineers set out to create the biggest and baddest intake on the market—and the result was their JLT Performance Series 1 cold air intake kits. These assemblies are fully computer designed to optimize space and give the best fit and finish. A roto-molded plastic tube resists engine heat and keeps the intake air charge nice and cool; while a smooth, tapered path to the throttle body increases air speed and horsepower. The intakes also feature a heat shield designed to help keep hot air out by firmly hugging and sealing itself to the contours of the hood. For great looks and more power, order the JLT Performance Series 1 cold air intake kit designed for your vehicle application.
( 6 )
$179.00
—
$439.00
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$839.99
$159.99
—
$789.99
Instant Rebate
Pinless, painless, and powerful, Vibrant HD2.0 pinless clamps update your original HD clamps with an innovative integrated clasp mechanism and a safety lock push-button, providing an extra level of security, ensuring the clamp is never unintentionally opened. Precision CNC-machined from 6061 billet aluminum and available in a variety of sizes, these 2.0 versions provide all the same functionality, look, and feel as Vibrant's previous model but in a pinless design that delivers positive feedback and an audible click when closed. Each pinless HD clamp features a hinge spring to keep the clamp in a sprung closed position, which not only keeps the clamp in a closed state when installed, but also helps during installation as the clamp has been designed to naturally align and close itself onto the union sleeve. Vibrant HD2.0 pinless clamps are completely backwards compatible with any existing HD system, as they will utilize the same weld ferrules, union sleeve, and O-rings, making it an easy replacement and upgrade from Vibrant's older-style HD clamp. The robust modular solution to mating charge pipe systems is now even better—Vibrant pinless HD clamps. Choose the tube size needed to securely connect your high performance system.
Not Yet Reviewed
$118.74
—
$177.64
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 51 )
$217.99
—
$299.99
Instant Rebate
Vibrant Performance reinforced silicone elbows offer race-proven, state-of-the-art performance for high-temperature, high-boost applications! Constructed from hand-wrapped, 4-ply, high-grade silicone, these elbows feature fantastic temperature resistance and are rated for -65 degrees F to 350 degrees F. Vibrant Performance reinforced elbows are strong and reliable--they won't swell or burst under extreme conditions. Vibrant Performance offers these reinforced silicone elbows in a variety of sizes and lengths in 40 degree and 90 degree styles to meet your fabrication needs.
( 27 )
$25.50
—
$107.34
On Sale
These SLP Performance cold air induction systems increase power by replacing your restrictive stock air box assembly. The systems include a composite air box, an oversized high-flow reusable air filter, an intake tube, and hardware.
( 9 )
$349.99
$314.99
Instant Rebate
Fabricate your own custom pipe assemblies using Vibrant Performance aluminum tubing transitions. These conical reducers are versatile, great for a wide variety of projects, and available in a variety of sizes. Simplify your next venture with quality aluminum transition tubing from Vibrant.
( 4 )
$26.59
—
$102.59
Instant Rebate
Vibrant Performance cast aluminum elbows keep the flow tight and smooth! The incredibly tight radius of these Vibrant elbows offers a smooth flow path, making them perfect for many of your turbo applications that lack needed space, like intercooler or turbo compressors. Each elbow comes with a beaded inlet and outlet to allow for a more secure clamping and is offered in several o.d. sizes. If space is your problem, Vibrant Performance cast aluminum tight radius elbows are your solution.
( 10 )
$36.58
—
$40.84
Using their original cold air intakes as a guide, JLT engineers molded, sculpted, and perfected everything until they had the best looking, fitting, and performing system money can buy: the JLT Performance Series 2 cold air intake kits. One of the best parts of these assemblies is their molded-in MAF housing right in the tube. This allows you to own an intake kit you can grow into and not have to upgrade or replace when you reach a certain horsepower threshold. If you drive a high performance machine and only want the best, you can trust JLT Series 2 cold air intake kits to deliver!
( 6 )
$259.00
—
$319.00
Although the Series 2 Cold Air Intake kits have been a huge success, JLT Performance engineers have outdone themselves again by creating the Performance Series 3 Cold Air Intake kits. The new Series 3 Cold Air Intake kits feature a 4 1/4 in. I.D. roto-molded plastic tube designed to resist engine heat and keep the intake air charge nice and cool. With having a 110mm MAF molded right into the tube, airflow is fast and smooth. Horsepower gains of up to 20-30 hp are typical when the JLT Performance Series 3 Cold Air Intake kits are installed with the required proper tuning. Order the model recommended for your vehicle.
( 2 )
$259.00
On Sale
Build power by reducing air restriction and turbulence with SLP Performance LS1 air box lids. These composite lids feature a wedge-shaped design to increase and smooth out airflow as it enters your engine. They come with a steel clamp for easy hookup, and they mount in place of your stock lid.
( 67 )
$139.99
$125.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
