Availability
Showing In Stock Items. Show All 11 Items.
Rugged Ridge AmFib low-mount snorkels are made from premium ABS plastic for high-strength and exceptional structural integrity to offer long-term utility. As part of Rugged Ridge's AmFib systems, these snorkels are over-engineered to be less invasive, perform better, and install easier than any snorkel they have built before. The OE-fit ensures seamless compatibility with your Jeep's cowl panel. As a matter of fact, the entire AmFib snorkel system and its components look "at home," as though they were part of your Jeep's original design. And—by quickly swapping the low air intake for the high-mount intake, you can defy water crossings with total confidence. Reinforce your Jeep's off-road capability with these bolt-on AmFib snorkel systems by Rugged Ridge.
Not Yet Reviewed
$719.99
The Snow Performance quick-disconnect assemblies are designed with the do-it-yourself fabrication guys or the shops fabricating custom turbo piping. Made from strong, yet lightweight black anodized aluminum, the clamps will hold up to to any boost pressure your turbo can throw at it. The O-ring seals allow movement and minor misalignment while still offering an excellent seal, even under boost. Assemblies include: * Black anodized aluminum clamp * Two aluminum weld-in flanges * Two high-temperature O-rings * Aluminum sleeve * Push-to-lock pin
Not Yet Reviewed
$123.69
On Sale
Summit Bucks
Boost Products USA silicone couplers are reinforced with textile layers to be extreme pressure resistant, and also to vacuum in your Air Charge System. The hose tubing couplers are suitable for your intercooler system, intake system, water lines or similar, as they can withstand up to 5 Bar and temperatures up to 220 degrees C (not to be used as fuel or oil line). Boost Products silicone hoses have achieved, and many times even exceeded the quality of silicone hoses, compared to ones made by other well-known manufacturers in quality tests. The silicone is durable and flexible, stable, and color-proof for many years. As a matter of fact, lots of well-known companies in the tuning and motorsport areas have come to rely on these quality hose silicone couplers by Boost Products.
( 3 )
$7.04
$6.34
Boyesen Rad Valves provide sharper throttle response and more horsepower by maintaining flow velocity and redirecting the intake charge to the intake ports. They offer one-piece aluminum casting, with no manifolds to trim, no plastic pieces to insert, and no messy glue, which can warp, shrink, melt, or crack. Rad Valves come complete with the valve, reeds, intake flange, gasket, and clamps.
( 1 )
$174.99
These Mishimoto air inlet intake elbows are manufactured from a combination of high-grade silicone and heat-resistant embedded fibers for maximum durability. They are designed to retain OEM fitment, while providing increased pressure tolerance for the ultimate upgrade in performance and style. The elbows are available in your choice of black, blue, or red finishes.
( 1 )
$152.95
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Making your car one-of-a-kind is great--unless you can't find what you need. AEM Induction universal cold air intake kits solve your customizing problems, fitting your engine swap with lots of cool flowing air. AEM universal kits provide parts that offer you multiple options and configurations to create your own special high-flowing system. They also include an instruction guide to assist you on installing and tips on how to make everything fit and work together--mass air sensor setup, bracket placement, welding, tube connection, and more. AEM Induction universal cold air intake kits include: * AEM Dryflow filter * Three 4 in. diameter pre-bent aluminum tubes * Straight 36 in. long tube * 4 in. diameter tube * Seven assorted couplers (elbow, straight, and step) * Weld-on MAF sensor mount for Hitachi blade sensors * Two brackets * Two 1 in. long rubber mounts * Two 12 in. long weld-on mount brackets * Two weld-on 3/8 in. x 1 3/4 in. long nipples * Two 3 1/2 in. to 4 1/2 in. range hose clamps * 35 in. 3/8 in. breather hose
( 5 )
$350.99
Draw attention to your Type R's engine bay with a race-inspired aFe Takeda Black Series Momentum Carbon Fiber Pro 5R cold air intake system. With a massive air filter and dyno-tuned intake tube, it's sure to perform as good as it looks. Additional details: * Dyno-proven gains up to +14 hp and +16 lbs.-ft. torque * Outflows factory intake by 35 percent * Measured flow: 365 cfm @ 7 in. H2O * 100 percent twill weave carbon fiber construction * Sealed housing with opening allows for viewing of massive air filter, yet seals when hood is closed to keep out hot air * Innovative filter-to-housing interface for easy installation * Washable and reusable Pro 5R air filter for maximum performance * Large 5-Layer Performance Air Filter: Momentum's innovative filter-to-housing interface was built to feature the largest air filter possible. This 7 1/2 in. tall 360-degree radial flow air filter features aFe's pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. * Dyno-Tuned Intake Tube: A lightweight high-gloss twill weave carbon fiber tube directs filtered air from the air filter to the engine. It's computer designed and tested to increase airflow, while also reducing weight and enhancing the visual appearance of the engine bay. * Unique Computer-Designed Carbon Fiber Housing: The simple yet elegant one-piece sealed housing features aFe's patent pending filter-to-housing interface, making installation a snap. The housing is made from lightweight, high-gloss, clearcoated twill weave carbon fiber. It utilizes the OE air inlet location, as well as an auxiliary air inlet, for maximum airflow. * Hassle-Free Installation: 304 stainless-steel clamps and all couplings are included for strength and durability. A premium bellows coupling allows for ample flexibility, and features a 3/8 in. port for the crankcase tube. This system is designed with fewer parts and utilizes factory mounting locations, making it extremely simple to install.
Not Yet Reviewed
$973.35
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$319.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
