Availability
Showing In Stock Items. Show All 12 Items.
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$329.95
—
$499.95
$296.96
—
$449.96
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$499.95
—
$549.95
$274.95
—
$302.95
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$304.95
—
$649.95
$274.46
—
$584.96
On Sale
Stillen offers a wide range of performance parts for a variety of vehicle makes and models, including the Trupower air intake kits. The Trupower air intake kits are designed to increase the airflow coming into the engine while also dramatically reducing air intake temperatures. Trupower air intake systems by Stillen feature a replacement radiator shroud and intake duct that brings cold air from the front of the vehicle through the truck's core support and into a large airbox. This innovative design takes advantage of the vehicle's factory air intake opening while also adding more airflow through the true cold air intake port. In addition to a significant reduction in air temperature, the Trupower cold air intakes by Stillen increases horsepower and torque. Made from high-quality materials, each kit is designed to be easy to install, often without requiring any modifications. Some kits may include a block off plate, free-flow tube system and/or a straight or free-flow coupler, depending on your application needs. Order the kit designed for your application needs. Upgrading your vehicle's air intake can provide several benefits, including: *Achieves ambient air temperatures faster than any other intake on the market * Achieves ambient air temperatures 60 seconds faster than factory air intake * Achieved 20+ hp increase +20 Torque increase—horsepower will vary per vehicle * Easy installation- no cutting/modifications required * High-quality Stillen air filter
Not Yet Reviewed
$406.84
—
$448.04
$366.16
—
$403.24
On Sale
Holley throttle body intake elbows feature a dual throttle body bolt pattern, and fit any intake manifold with 4150 or Dominator mounting flange. They also have a 105mm throttle body opening and a 100 degree mounting angle with slotted mounting holes. Constructed from cast aluminum, they include a MAP sensor port cover, gaskets, and hardware.
( 13 )
$799.95
$439.95
On Sale
COBB Tuning SF Intake systems remove a pre-turbo restriction in the stock intake system. They provide great power gains when combined with custom mapping on your Accessport tuner. To maintain optimal air flow, SF Intake systems utilize several unique features such as a custom conical cloth air-filter element and a computational fluid dynamics (CFD)-designed velocity stack. Tuned or stock, with the addition of a SF Intake system turbocharger induction noise and bypass valve venting sounds are much more audible. COBB Tuning SF Intakes were designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock air box and bolt the SF intake into place in just minutes. Additional attributes of COBB Tuning SF Intake systems (varies by model): * Temperature-resistant composite construction; saving weight and reducing heat transfer * Integrated velocity stack * Integrated airflow straighteners * 4-ply steel-reinforced silicone post-MAF tubing (where applicable) * Pre-oiled, cleanable, reusable, custom filter element * Air boxes are available for most applications (sold separately) * COBB Tuning off-the-shelf (OTS) maps for the Accessport make SF Intake installs easy: bolt it in, flash, and go IMPORTANT NOTE: Some SF Intakes REQUIRE tuning to ensure the MAF sensor reads properly and the engine operates within safe parameters. Check your application carefully.
( 3 )
$290.00
—
$435.00
$261.00
—
$391.50
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$549.95
—
$1,099.95
$399.95
—
$535.95
On Sale
Upgrading your vehicle's restrictive stock air box with Stillen air intake kits will allow for increased airflow, which can help your engine breathe better and more efficiently. Air intake systems, also referred to as cold air intakes, are popular performance modifications that can be installed on many vehicle classes, ranging from high-performance sports cars to hard-working diesel trucks. These air intake kit components are designed to replace your vehicle's factory intake assembly with aftermarket intake tubes, air boxes, and filters to overcome restrictions in the intact tract, thus allowing more air to enter the cylinders. With an air intake kit by Stillen, you can expect to see a positive effect on horsepower, torque, and acceleration, as well as improved fuel economy—and that makes Stillen's air intake kits your best dollar-per-horsepower investment by far! Upgrading your vehicle's air intake can provide several benefits, including: * Improved fuel economy—cold air intake systems can improve your vehicle's air-to-fuel ratio, which can lead to better gas mileage. * Better acceleration, cold air intake systems can improve your vehicle's responsiveness and acceleration speed * Increased airflow—upgrading your air intake can allow for increased airflow, which can help your engine breathe better and more efficiently * Enhanced engine sound—increased airflow can create a sought-after engine roar * Better air filter life—aftermarket air intakes often come with washable, reusable air filters that can last longer than standard dry filters * Reduced engine wear—increased airflow can reduce wear on your engine * Engine longevity—upgrading your air intake system can enhance the longevity of your engine
Not Yet Reviewed
$310.78
—
$581.94
$279.70
—
$523.75
On Sale
APR open carbon fiber intake systems feature a beautiful carbon fiber air dam that directs fresh air into a massively oversized 7 in. cotton filter with frontal inlet. They include thick T304 stainless steel heat shields and air buffer gaps on the back of the carbon fiber shell to reject heat from the engine bay. Doing away with the airbox completely solves the dramatically undersized, power-robbing inlet restriction that's glaringly apparent at higher horsepower levels on the factory system. The 4 in. inlet is compatible with the factory inlet or the upgraded APR Ultracharger System, and efficiently creates an uninterrupted airflow path into the supercharger for maximum results. APR open carbon fiber intake systems are the ultimate air intake solution for your 3.0 TFSI. Features, items, and specs: * Drop-in open system installs in minutes * Flow bench gains up to 268 cfm at 28 in. of water column over stock * Average of 17 AWHP at stage 2+ (93 octane) more than factory system * Extremely precise fitment * Massive airflow improvements * 502 total cfm at 28 in. of H2O stock * SAI breather filter * Billet aluminum mounting feet * Billet aluminum 4 in. flange adapter
( 1 )
$549.95
$399.95
On Sale
COBB Tuning SF Air Boxes add the benefits of a cold air intake to the outstanding performance of COBB SF Intakes. These air boxes enclose the SF Intake so hot engine bay air that robs horsepower is prevented from entering the intake system. Their unique design also separates rainwater from the intake air, eliminating the water ingestion issues that plague in-fender cold air intakes. Features of COBB Tuning SF Air Boxes: * Available for a variety of makes and models * 16-gauge aluminum construction * Powdercoated finish * Riveted COBB nameplate * Where possible, OE snorkel feeds cold air to the air box * Stainless steel hardware * OEM-quality fit and finish
Not Yet Reviewed
$290.00
$261.00
On Sale
Stillen is pleased to offer Z-Tubes as a solution for the cracked intake piping for the Infiniti G35 and FX35 vehicles. Made of a roto-mold plastic, these Z-Tube intake ducts offer excellent insulation properties, repelling heat coming off the surface of the engine. As a result the cold intake power increases dramatically. Order the model designed for your vehicle. Features and benefits: * Z-Tube constructed of roto-molded plastic * Allow for connections for factory breather tubes * Eliminates factory baffling, increasing flow efficiency and eliminating torn factory coupler issues * Offers increased throttle response
Not Yet Reviewed
$346.99
$312.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
