Availability
Showing In Stock Items. Show All 116 Items.
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 30 )
$748.00
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 93 )
$509.95
—
$689.95
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 41 )
$509.95
—
$564.95
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris. Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 435 )
$699.00
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$758.99
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$524.95
—
$719.95
Halltech Killer Bee MF108 cold air intake kits are world champion induction systems for your C6 Corvette that require no additional tuning. These systems include the Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and the systems feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed Killer Bee induction systems also feature strong and durable XLPE poly construction, offered in black or red to complement your red fuel rail covers. They come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 1 )
$619.99
K&N Blackhawk cold air intake kits not only look impressive under the hood, but they are also designed to improve airflow while providing outstanding filtration to protect your engine. The designs have undergone rigorous testing, and the resulting power and torque gains have been impressive. They feature lightweight aluminum tubing cut and shaped to precise specifications, surfaces are carefully hand worked to remove any rough edges or metal burrs, and a K&N engraved metal plate is welded in place. The tubes are then powdercoated with a durable flat black finish. The kits include a black DRYFLOW synthetic washable air filter with thick, low-restriction filter media, which protects the engine without the need for air filter oil. These assemblies include all the hardware necessary for an easy installation. The air must flow--and it will when you order the K&N Blackhawk with DRYFLOW cold air intakes best suited for your application!
( 268 )
$524.99
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$518.95
—
$599.95
Don't let your stock air box hold your vehicle's performance back. The experts at Trick Flow® have engineered TFX™ cold air intake kits to meet the intake airflow demands of your fuel injected ride. The kits replace your restrictive air cleaner with a low-restriction reusable filter, a tuned molded black plenum (where applicable), mounting hardware, and instructions. They are manufactured by K&N for Trick Flow®.
( 137 )
$515.99
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$529.95
—
$649.95
K&N elevated intake snorkel kits are built to deliver added protection and confidence when heading off-road and into extreme environments. These systems help ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion (not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N, or Airaid cold air intake system (see vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style. * Helps prevent ingestion of dirt, debris, water * Maintains a clean but rugged OEM-style appearance * Trail-ready installation in approximately 3 hours * Order the kit recommended for your vehicle
Not Yet Reviewed
$589.99
—
$648.99
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$524.99
—
$682.99
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$836.00
$752.40
APR PEX intake systems are attractive high-performance upgrades designed to increase performance by letting the engine breathe more freely. Their closed airbox design rejects power-robbing heat from the engine bay thanks to the high-heat deflection material used, and it provides an unrestrictive path for cold, dense air fed from outside of the engine bay to maximize power. A high-flow, reusable filter provides excellent filtration without the restrictions, which keeps the engine clean while optimizing power delivery. APR PEX intake systems recorded a 31 percent cfm improvement over the factory airbox, which translates into a sharper throttle response, lessened strain on the turbocharger, and more horsepower and torque. Offering an excellent value, PEX systems install in minutes, looks fantastic, deliver a sporty engine note, and is recommended at all stages of performance.
Not Yet Reviewed
$549.95
—
$799.95
Chevrolet Performance air intake kits are one of the easiest ways to increase your engine's horsepower and torque. The tubes are made from quality materials like aluminum or heavy-duty plastic, and the fire-breathing conical-style filter elements are available in various colors. The filters don't require or use oil, and can be easily cleaned when they become dirty. These intake kits are available for many specific engine and vehicle applications—so add more airflow and more performance to your street machine!
( 11 )
$599.33
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 64 )
$573.00
—
$865.00
$515.70
—
$778.50
Inspired by heavy-duty industrial and military applications around the world, AEV's Ram snorkel intake systems are designed to provide your hard-working engine with the coldest and cleanest air charge possible, maximizing engine performance and increasing longevity—even in the most severe environments. Thanks to the snorkel's OE quality, cross-linked polyethylene construction, the intake body is both lightweight and extremely durable, and are also UV-stable, so you won't need to worry about it fading or warping, even in extremely sunny climates. The raised air intake systems include a traditional Air Ram with a massive 5 in. inlet for maximum airflow. An optional pre-filter attachment, sold separately, is available and is perfect for those motorists who regularly expose their trucks to more severe environments, such as high dust, sand, or silt. Key features: * Custom-designed specifically for Ram 1500/2500/3500 trucks * Huge 5 in. inlet for maximum airflow * Raises air intake for a cleaner, colder air charge * Optional self-cleaning Sy-Klone Pre-Filter is available (sold separately) for severe environments, such as with high dust, sand, or silt Pease note: Diesel applications are not 100 percent water-tight due to the OE Active Air System. Exercise caution when crossing deep water.
Not Yet Reviewed
$569.00
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$502.90
—
$629.90
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$573.00
—
$729.00
$515.70
—
$656.10
Designed to be run with your Edelbrock E-Force Competition supercharger, these E-Force air intake systems can add additional horsepower to your vehicle--and who doesn't want more power? E-Force Competition air intake systems feature an open element style cold air system with an integral mass air meter, a cone-style air filter that can be cleaned, oiled, and reused, and a large molded plastic heat shield to block high temperatures and permit a rush of cool air into your supercharger! Kits are available for a variety of applications from 2005 and up.
( 1 )
$509.95
—
$676.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
