Availability
Showing In Stock Items. Show All 16 Items.
On Sale
BladeRunner intake manifolds from aFe Power provide smooth and direct airflow for minimal pressure loss and maximum CFM gains. How do they do it? With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold. These paths are smoother and shorter, producing much smaller dead air zones, for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! BladeRunners are available in configurations for a wide range of vehicles from the 1990s and up. Additional features include: * Proprietary internal bolt design guaranteed not to deform or leak * Cast A356-T6 aluminum construction * Up to 5 port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware
( 5 )
$379.05
—
$561.75
$341.15
—
$505.58
Pacific Performance Engineering offers high-flow intake bridge manifolds for a wide range of vehicles, including many Chevrolet and GMC trucks from the early 2000s and up. They are perfect for custom, hot rod, or marine applications. High-performance engines require sufficient airflow, as well as fuel, to be optimally efficient. PPE's high-flow intake manifolds eliminate the restrictive air intake heater and quickly channel every precious pound of turbo boost into the engine. The result is more horsepower and lower EGTs. Features: * Full 3 in. intake ported bridge * 3 in. robust cast aluminum end resists distortion from hose clamp
Not Yet Reviewed
$269.99
On Sale
aFe BladeRunner turbo inlet manifolds increase performance to your engine while increasing air flow over the factory turbo inlet. BladeRunner turbo inlet manifolds also improve turbo spool up times and lowers exhaust gas temperature (EGT). They're constructed of durable A356-T6 aluminum and use the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. BladeRunner manifolds come complete with all necessary mounting hardware.
( 4 )
$441.00
$396.90
Mopar Performance cold air intake kits reduce intake air temperature and increase intake manifold pressure, which equals more power. They're quick to bolt on and they make substantial, yet economical power and torque gains.
( 16 )
$382.50
—
$473.99
On Sale
Holley throttle body intake elbows feature a dual throttle body bolt pattern, and fit any intake manifold with 4150 or Dominator mounting flange. They also have a 105mm throttle body opening and a 100 degree mounting angle with slotted mounting holes. Constructed from cast aluminum, they include a MAP sensor port cover, gaskets, and hardware.
( 13 )
$279.95
—
$799.95
$251.95
—
$439.95
Hybrid Racing offers cold air intake systems for a variety of applications, including select Honda© and Acura© models. Designing an intake system with a set of guidelines isn't hard to achieve. However, building an intake system that not only fits every engine combination while allowing that setup to produce more power is. Hybrid chose to narrow that field and focus on the best recipe for power gains. Combined with its high-flow velocity air filter, these cold air intake systems have shown gains of up to 10 percent (5-10 hp) across the powerband compared to a short ram system, while significantly reducing intake air temperatures. Don't want to relocate your battery? No problem. The Hybrid Racing RSX intake allows for the battery to stay in the OEM location. These intakes require a 70mm or larger throttle body and the RBC/RRC style intake manifolds. Fitment or compatibility with an OEM PRB intake is not guaranteed. Slight trimming of the LH inner fender lining is required, and the removal or relocation of the OEM windshield washer bottle is needed. Alterations to cars running OEM Type R brake cooling ducts may be necessary. The included radiator hose fits the K20A/A2/A3/Z1 water neck. It may not fit the K20Z3/K24 water neck. What's included? 1 – 3 in. Hybrid Racing silicone cold air intake tube 1 – Velocity stack air filter 1 – Silicone upper radiator hose (for PRB style coolant neck) 1 – Valve cover breather filter 1 – Lower filter bracket 1 – Anti-vibration clamp 1 – Stainless T-bolt clamp 2 – Silicone hoses for breather connections 2 – Machined aluminum push-in fittings 5 – Hose clamps 2 – Bolts 3 – Washers
Not Yet Reviewed
$358.14
Hybrid Racing offers cold air intake systems for a variety of racing and off-road applications, including select Honda© and Acura© models. Engineers spent countless hours testing and refining this design to ensure it was the absolute best intake available for the 8th Gen Civic Si platform. These intakes are designed to make big gains on any setup, from totally stock to high-lift cams and huge exhausts. Dyno graphs are provided to show the intake's effectiveness against its competitors, but for example, Hybrid saw 14 hp peak gain and 9 hp average gain against the stock air box. Against competing 3.5 in. cold air intakes, Hybrid saw typical peak and average gains of around 2-3 hp with a much smoother power band—meaning more power and better drivability. The first and perhaps most obvious feature of these intakes its full silicone construction. The 1/4 in. thick fiberglass-reinforced silicone tubing is sturdy enough to withstand engine vacuum and insulates your intake charge better than any metal or plastic intake on the market. This leads to very cold intake air temperatures, meaning a denser air charge and more overall power. Another power-adding feature is the included velocity stack. The 6 in. velocity stack is designed to lower inlet restrictions and allow more air into your engine, again leading to a denser, more powerful inlet charge. One very cool component in each kit is the injection molded air bypass manifold. These manifolds serve a number of functions. They provide attachment points for the factory MAF, as well as for the (included) silicone tubing that attaches to the factory valve cover vent and air bypass valve. They also have a built-in air bypass feature that allows air into the engine when the intake's filter becomes wet. This helps to avoid the dreaded hydro-lock that so many people normally worry about in heavy rain. Hybrid Racing tested the bypass valve by totally submerging an air filter in a bucket of water and running the motor. Even when totally submerged, the engine idled and rev'd safely without hydro-locking. Of course, it's still advised to practice caution when going through deep water in any car! The biggest gain the bypass manifolds provide is the reduction of parasitic Helmholtz resonance. The internal geometry of the air bypass manifold is designed to smooth out your power band. The end result is an intake that (on average) makes up to 14 hp over the stock air box and even 2-3 more horsepower than any other 3.5 in. intakes. Also included with each kit is a powdercoated steel battery tray that relocates the battery in front of the transmission to make room for this intake's massive piping. Hybrid also provides a silicone upper radiator hose to give better clearance than the stock radiator hose. Silicone tubing is provided to replace the OEM rubber valve cover breather and air bypass tube. This gives the engine bay a cleaner, more finished appearance. The kit includes all of the bolts, hose clamps, and hardware needed to install the intake and battery tray. Notes: * You will need a tuning software like Hondata's Flash Pro to tune the car after installation. This kit should be run using MAP tunes only and should not be used with the factory ECU calibration. Please note, this system is sold as a complete kit and is not offered in pieces. * Full silicone construction * Most powerful 8th Gen intake on the market * Built-in air bypass helps to prevent hydro-locking * Includes 3.5 in. velocity stack and filter
Not Yet Reviewed
$265.99
Are you looking to improve your bike engine's breathing capability by installing an open element air filter? HardDrive Coned Ram-Air air cleaners are custom-made, tilt-forward air cleaners. They feature a 4.5 x 12 in. CNC billet aluminum housing available in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coned Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® motorcycles.
Not Yet Reviewed
$316.76
—
$395.96
High-capacity air cleaner housings are used to supply fresh air to an engine. Based on the popular open element air cleaner, HardDrive Chopped Ram-Air air cleaners are dedicated to attaining maximum performance from your motorcycle. These custom-made, tilt-forward air cleaners feature a 4.5 x 10 in. CNC billet aluminum housing in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Chopped Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® bikes.
Not Yet Reviewed
$296.96
On Sale
aFe Magnum Force Super Stock Pro Dry S systems increase air flow, horsepower, and torque to offer your ride a new level of power and performance. These aFe systems include intake tubes, one-piece mandrel-bent tubing with durable wrinkle black powdercoat that directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. aFe Magnum Force Super Stock Pro Dry S air intake systems are direct bolt-on kits that require no cutting or drilling for the installation, and all clamps, couplings, and hardware are included. Features of aFe Magnum Force Super Stock Pro Dry S intake systems: * Pro Dry S filter features 3-layers of progressive media to provide maximum flow with excellent filtration (progressive layering of media allows the filter to flow at high levels even when dirty * Pro Dry S non-oiled synthetic air filter requires no oils for cleaning for maximum convenience * Silver Bullet throttle body spacer is precision machined from 6061 T-6 billet aluminum for lightweight, high-strength, and the perfect fit and finish * Serrated/Helix design of spacer creates air turbulence in the intake manifold to increase the air pressure in the combustion chamber resulting in increased horsepower, torque, and improved throttle response * Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs
( 2 )
$310.00
$279.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
